CORSAIR iCUE LINK LX RGB Fans User Guide
- September 26, 2024
- Corsair
Table of Contents
CORSAIR iCUE LINK LX RGB Fans
USER GUIDE
MODEL: iCUE LINK LX RGB
Expansion Fan | 120mm Starter Kit | 140mm Starter Kit
The LX RGB Fans include components such as iCUE LINK LX RGB Fan, iCUE LINK System Hub, QuikTurn Mounting Screws, Active Bridge Connector, Passive Connector, iCUE LINK Cable, Micro-USB Cable, Power Cable, Active Port, and Passive Port.
Expansion Fan
- One (1) Fan
- One (1) iCUE LINK Cable
- Two (2) Connectors
- Four (4) QuikTurn Mounting Screws
120mm Starter Kit
140mm Starter Kit
GETTING TO KNOW YOUR LX RGB FANS
A. iCUE LINK LX RGB Fan
B. iCUE LINK System Hub
C. QuikTurn Mounting Screws
D. Active Bridge Connector
E. Passive Connector
F. iCUE LINK Cable
G. Micro-USB Cable
H. Power Cable
I. Active Port
J. Passive Port
GETTING TO KNOW YOUR iCUE LINKSYSTEM HUB
I. Active Port
K. Power Input
L. USB Input
M. Tach Output
FAN INSTALLATION
BEFORE YOU START
To ensure proper operation, keep the active portsfree of any foreign objects/materials. Please usethe LX RGB and accessories as defined in thisdocument.
Turn the computer off prior to the installation ofthe LX RGB and accessories.
STARTER KIT
This section will provide a brief guide on how to install your LX RGB Starter Kit.
Create or Add Into a Fan Group
Connect the LX RGB fan into an existingfan group by aligning and inserting theconnectors into the open active (I ) andpassive ports ( J ).
Set Up the LX RGB Fan Group
After connecting your LX RGB fanstogether, insert the iCUE LINK cable ( F )into an open active port ( I ) on one of yourLX RGB fans.
Install LX RGB Inside the Case
Mount the LX RGB fans onto your casewith the supplied QuikTurn mountingscrews
( C ).
Please note that QuikTurn screws threadmuch faster than traditional self-
tappingscrews; we advise only hand-tighteningQuikTurn screws with a
screwdriver toavoid over-threading your LX RGB fans.
Connect Fan to iCUE LINK System Hub
Connect the power cable ( H ), Micro-USBcable ( G ), and iCUE LINK cable ( F ) into theSystem Hub ( B ), then connect the powercable ( H ) and Micro-USB cable ( G ) into yourpower supply and motherboard,respectively.
https://www.corsair.com/ww/en/explorer/diy-builder/fans/lx-rgb-fan/
The iCUE LINK System Hub ( B) can bemagnetically mounted on a steel chassis oradhered to a surface with the suppliedmounting tape.
EXPANSION FAN
This section will provide a brief guide on how to install your LX RGB Expansion Fan.
Create or Add Into an Existing Fan Group
Connect the LX RGB Expansion fan into anexisting fan group by aligning andinserting the connectors into the openactive ( I ) and passive ports ( J ).
Connect LX RGB to an iCUE LINK SystemHub
Insert the iCUE LINK cable (F) into an openactive port (I) on one of your LX RGB fans.
https://www.corsair.com/ww/en/explorer/diy-builder/fans/lx-rgb-fan/
Connect the iCUE LINK Cable (F) into anavailable active port (I) on the iCUE LINKSystem Hub (B- sold separately).
SOFTWARE SETUP
1. Install iCUE
Learn more and download the latest CORSAIR iCUE software
2. Update iCUE
Once iCUE is installed, run the software. If a newer iCUE version is available or if any ofthe connected devices need a firmware update, you will be prompted to perform anupdate via a notification in the top right corner. You can also click the settings (cogwheel icon in the top right corner) and check for the software and firmware updatesmanually.
iCUE LINK LX RGB Fans Quick Start Guide | CORSAIR
3. Quick Lighting Setup
Select the predefined Murals effects from the iCUE Home screen to quickly change thelighting effects.
4. Configure iCUE – Fan Setup
The Setup page will display all LX RGB fans connected to the System Hub and
allow you tore-order them to better match the physical placement inside your
system.
Mouseover the iCUE LINK System Hub tile and select Lighting Setup.
- Select the LX RGB under Lighting Setup to rearrange your fans.
5. Configure iCUE – Fan Lighting
Choose your desired lighting animation from several pre-defined lighting
effects.
Select LX RGB from the navigation bar.
Click “Lighting Effects” to access the lighting effects page and select the
desired lightingeffect.
Click the “+” icon under “Lighting Layers” to add additional lighting effects.
6. Configure iCUE – Fan Performance
Select your desired fan curve presets between Quiet, Balanced, Extreme, or create your owncurve.
- Select the LX RGB from the navigation bar.
- Click “Cooling” to access the fan performance page.Select the desired fan curve preset for each fan.
- Select the desired fan curve preset for each fan.
- … or click the “+” icon under “Cooling Presets” to create a custom fan curve.
7. Additional Setup
Visit our CORSAIR LAB for additional iCUE setup, configuration and tips.
POWER RATING
System Hub Output rating: 12Vdc 7A (per port)
LX120 RGB Input rating: 12Vdc 0.4A
LX140 RGB Input rating: 12Vdc 0.45A
WARRANTY
iCUE LINK LX RGB Series fans have a 5-year warranty.
LEGAL
© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo areregistered trademarks of CORSAIR in the United States and/or other countries. All othertrademarks are the property of their respective owners. Product may vary slightly fromthose pictured.
SHOP
New Products
Special Offers
Corsair.com Exclusives
Where to buy
Certified Refurbished
Business Solutions
EXPLORE
PC Builder
CORSAIR Innovation
Design Your Loop
Best Gaming Accessories
Intel 14th Generation Upgrades
AMD AM5 Upgrades
DDR5 Memory
Ambassadors
CORSAIR
About
Investor Relations
Supply Chain Disclosure
8/27/24, 10:50 AM iCUE LINK LX RGB Fans Quick Start Guide | CORSAIR
https://www.corsair.com/ww/en/explorer/diy-builder/fans/lx-rgb-fan/
Specifications:
-
Model: iCUE LINK LX RGB Fans
-
Sizes Available: 120mm Starter Kit, 140mm Starter Kit
-
Components: 1 Fan, 1 iCUE LINK Cable, 2 Connectors, 4 QuikTurn Mounting Screws
-
-
FAQ
Q: Can I use the LX RGB Fans without the iCUE LINK System Hub?
A: No, the iCUE LINK System Hub is essential for controlling the RGB functionality and power management of the fans.