CORSAIR Ironclaw RGB FPS-MOBA Gaming Mouse User Guide
- June 3, 2024
- Corsair
Table of Contents
CORSAIR Ironclaw RGB FPS-MOBA Gaming Mouse
GETTING TO KNOW YOUR MOUSE[
](https://manuals.plus/wp-
content/uploads/2022/12/CORSAIR-Ironclaw-RGB-FPS-MOBA-Gaming-Mouse-fig-1.png)
- A — LEFT CLICK BUTTON
- B — RIGHT CLICK BUTTON
- C — MIDDLE CLICK BUTTON
- D — PROFILE CYCLE BUTTON
- E — DPI CYCLE BUTTON
- F — FORWARD BUTTON
- G — BACKWARD BUTTON
- H — MULTI-PURPOSE LED INDICATOR
- I — PTFE GLIDE PADS
- J — OPTICAL GAMING SENSOR
- K — USB CONNECTION CABLE
SETTING UP YOUR MOUSE
- Turn on your computer.
- Connect the mouse to available USB 2.0 or USB 3.0 port on your computer.
- Download the iCUE software from www.corsair.com/downloads.
- Run the installer program.
- Follow instructions for installation.
MULTI-PURPOSE LED INDICATOR
Various aspects of mouse operation are communicated through multi-purpose LED indicator located on the left side of the mouse.
ONBOARD PROFILE STATUS
| MULTI-PURPOSE LED INDICATOR
---|---
LED #1| LED #2| LED #3
PROFILE #1| RED| OFF| OFF
PROFILE #2| OFF| GREEN| OFF
PROFILE #3| OFF| OFF| BLUE
DPI STAGE STATUS|
STAGE #1| CYAN| OFF| OFF
STAGE #2| CYAN| CYAN| OFF
STAGE #3| CYAN| CYAN| CYAN
For use only with NRTL listed end product and Mouse Rating: 5V 200mA
CAUTION
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user authority to operate the equipment.
WARNING: Changes or modifications not expressly approved by CORSAIR MEMORY, Inc could void the user’s authority to operate the equipment.
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WEB: corsair.com PHONE: 888-222-4346 SUPPORT: support.corsair.com
© 2018 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-001760 AA
References
- corsair.com
- Corsair Blog - Corsair Community
- CORSAIR Downloads | CORSAIR iCUE Software
- Home - Corsair Community