Jiangxi G61 Gaming Mechanical Keyboard User Manual
- September 25, 2024
- Jiangxi
Table of Contents
Jiangxi G61 Gaming Mechanical Keyboard
Basic parameters
- Product model: G61
- Battery parameters: 3.7V 2000mAh (does not support fast charging! Please connect to a computer for charging)
- Input: 5V 200mA
- Connection modes: wired connection, Bluetooth connection (5.0), 2.4G connection
- Wireless version: 2.4G, BLE 5.0
- Wireless connection distance: 10 meters (in unobstructed open environments)
- Charging port: Type-C
- Supported systems: Windows MacOS, iOS, Android
- Product size: 42mm 293mm 102mm
- Manual measurement of relevant parameters. In case of any discrepancies, the actual product shall prevail!
Note: The wireless function is only available in the third mock examination version!
Overview
- Type-C interface
- 2.4G receiver storage (only three templates)
- Power switch ON/OFF (only three templates)
- Double-section foot brace
Power indication (only three templates)
- When charging, the fn key stays on, when fully charged, the fn key follows the light effect, and the low voltage fn key light flashes.
Sleep mechanism (only three templates)
- In a wireless mode connection, if there is no operation status, the backlight will turn off after 2 minutes, and the keyboard will still be working.
- When any key is triggered, the backlight will light up on time; After 10 minutes of inactivity, enter deep sleep mode and trigger any key to wake up the keyboard.
Lighting settings
- FN+Space Long press for three seconds to restore factory settings
- FN+Back switch lighting effects:
- 1: Constant light mode (default) 2: Breathing mode 3: Press and extinguish as you go
- 4: Flow with the flow 5: Drip ripples 6: Flowing light overflow 7: Flowing light
- 8: Dazzling dot color 9: Instant trigger 10: No trace on snow 11: Button ripples
- 12: Blossoming wealth 13: Running lantern effect 14: Rotating storm
- 15: Serpentine running horse 16: Abundant star dots 17: Endless flow
- 18: Diagonal pulling and changing 19: Sinusoidal light wave
- FN+[{Light Brightness – FN+]} Light Brightness+
- FN+;: Light speed – FN+'”Light speed+
Combination key function
Windows
Connection method
2.4G connection (only three templates)
- 2.4G mode: Insert the dedicated receiver that has been paired with the code, and turn the switch to the “ON” state, FN+B will enable 2.4G mode, and the keyboard can be used normally.
Bluetooth connectivity(only three templates)
- Bluetooth mode: When the switch is turned to the “ON” state,
- There are three Bluetooth channels: FN+Z: Bluetooth 1 FN+X: Bluetooth 2 T: Bluetooth 3.
- Turn on the Bluetooth pairing of the device, and the keyboard can be used normally.
Wired
- Wired mode: First, insert the connecting cable into the TYPE-C interface, then connect the other end to the computer.
- Turn on the wired mode with FN+V (plug in the wired version), and the keyboard can be used normally.
List of Items
- One keyboard
- One TYPE-C cable
- 2.4G receiver (only three templates)
- One instruction manual
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interterence received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, according to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
CONTACT
Manufacturer: Jiangxi Jichi Technology Co., Ltd
- Building 3, Godfrey Industrial Park, Lvbao Avenue, Qingyuan District, Ji’an City, Jiangxi Province
- Contact phone number: 400-1191-696
- Website: www.eweadn.cn
- Product execution standard number: Keyboard GB/T 14081-2010
- Attention: Product images are for reference only and may differ from the actual product.
- Please refer to the actual product. We apologize for any inconvenience caused!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>