Jiangxi W377 3 In 1 Magnetic Wireless Charger User Manual
- June 1, 2024
- Jiangxi
Table of Contents
Jiangxi W377 3 In 1 Magnetic Wireless Charger
3-in-1 Magnetic Wireless Charger
User Manual
Packing list
Product Description
Specification
- Model: W377
- Output: For Phone: 7.5W/SW
- For Watch: 2.5W
- Input: 5V 3A 9V 2A
- For Airpods: 3W
Compatibility
-
For iPhone
Work For iPhone: iPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max, iPhone 14, iPhone14 Plus,iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13. iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 12 mini -
For Airpods
Work For Apple Headphones: Apple AirPods 3, AirPods 2,AirPods Pro, AirPods Pro2 and more.(Note: Not suitable for AirPods gen 1 or Airpods 2 without wireless charging case) -
For Apple Watch
Work For Apple Watch: Hermes/Nike/Ultra 2/Ultra/9/8/7/6/5/4/3/2/SE -
For Others brand:
Support mobile phones, smartwatch, and earbuds that comply with the QI standard.
Horizontal/Vertical Mode
Folded Mode
Foldable design, folded up smaller size, lightweight and compact travel
without worry.
How to use the product
- Charge your cell phone:Connect the power adapter to the USB-C power input port of the wireless charger, when the power is turned on, the blue light of the charging indicator will light up for 3 seconds and then turn off. ® Place the product vertically at a suitable angle @ Open the cell phone holder upwards ® Place the cell phone in the charging position The blue light of the indicator light will turn off after 5 seconds indicating that the cell phone is charging normally. If the phone is not charging properly, the blue light will flash rapidly.
- Charge your Airpods: Place the Airpods in the charging position (Note: Please do not wear 3mm silicone shield, otherwise it may lead to poor contact can not be charged. Earbuds with Qi protocol support )
- Charge your iWatch : ®. Open the watch module downward 2. Place the watch in the wireless charging position and align it with the magnet. When the charging indication lights up on the watch display, the watch is in charging status.
Warm Tips
Please pay attention to the following items, otherwise it may cause failures
like irregular charging, over-heated charging, intermittent charging, or even
no charging.
- Please place your phone/watch/Earbuds in the correct charging area.
- The charging distance is between 0.07in-0.21 in(3-8mm), please do not wear protection cases thicker than 0.11 in(3mm).
- During the charging process, please make sure there are no metal or magnetic objects around the central 2.36in of the back of the phone.
- The lower temperature, the faster charging speed, and charging speed is faster in winter than in summer.
- Please do not charge in a high temperature and humid environment to avoid damaging the circuit.
- Please make sure that your phone support magnetic charging, or wear a magnetic phone case;
- If charge a wireless charging mobile phone without magnetic function, please lay the charging station flat, but it is not recommended. Because it may cause lower charging speed, or cause heat.
About the FCC
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.