124-52202 Double Press With Leds And Comfort Sensors For Niko Home Control Instructions

: September 24, 2024
: niko

Table of Contents

Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**124-52202 Double Press With Leds And Comfort Sensors For Niko Home Control Instructions

**

This double tap can be configured to control a wide range of scenarios and programming in a Niko Home Control II installation on bus wiring. It is equipped with programmable LEDs that provide feedback on the programming being done. In addition, the print can act as an orientation light when The LEDs are on.
With the integrated temperature and humidity sensor, the pressure also supports multi-zone control of climate and ventilation, giving you the opportunity to increase your energy efficiency and comfort.

Its multifunctional temperature sensor can be set to control a heating/cooling zone in a Niko Home Control II installation, either as a regular thermometer (Niko Home Control programming software version 2.20) or to create specific conditions (e.g. control sun shades)
The humidity sensor can also be used in programming (Niko Home Control programming software version 2.20), for example for automatic ventilation control in a bathroom or toilet

The print has an easy click mechanism for wall mounting bus wiring controls and is available in all Niko’s designs.

Technical data

Double pressure with LEDs and comfort sensors for Niko Home Control, anthracite coated.

Function
- Combine the pressure temperature sensor with a heating or cooling module for multi-zone control or a relay dul for electric heating
- Combine its integrated humidity sensor with a ventilation module for automatic control the ventilation
- Reference values and weekly programs are managed via the app
- The calibration is controlled via the programming software
- Maximum number of pressures set as a temperature sensor per installation: 20
- Temperature sensor range: 0 – 40 °C
- Temperature sensor accuracy: ± 0.5 °C
- Humidity sensor range: 0 – 100% RH (non-condensing or icing)
- Humidity sensor accuracy: ± 5%, between 20 – 80% RH at 25 °C
Material of the keyboard: The central plate is enamelled and made of hard PC and ASA.
Lens: At the bottom of both keys on the push button there is a small, amber LED (1.5 x 1.5 mm) to indicate status of the action.
Colour: enamelled anthracite (approximately NCS S 7502 – R, RAL 7022)
Fire safety
- the plastic parts of the keys are self-extinguishing (withstands a filament test of 650 °C)
- the plastic parts of the keys are halogen-free
Supply voltage: 26 V DC (SELV, safety low voltage)
Disassembly: To disassemble, simply pull the pressure off the wall-mounted circuit board.
Protection class: IP20
Protection class: IP40 for the combination of a mechanism and a recessed surround plate
Vandal class: After installation, an impact resistance of IK06 is guaranteed.
Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
Approval: CE