FOSCAM SD4H Wi-Fi PTZ IP Camera User Guide

: September 24, 2024
: FOSCAM

Table of Contents

SD4H Wi-Fi PTZ IP Camera
Specifications:
Product Usage Instructions:
1. Getting Started:
2. Physical Description:
3. Setting Up Your Camera:
- Connection via the Foscam App:
- FAQ:
Q: How often should I change the camera’s password?
Q: What are the recommended smartphone specifications for a

SD4H Wi-Fi PTZ IP Camera

“`html

Specifications:

Model: Wi-Fi PTZ IP Camera
Resolution: Full HD
Connectivity: Wi-Fi, Ethernet
Compatibility: iOS 11 or higher, Android 5.0 or higher
Storage: Micro SD Card Slot
Features: Pan-Tilt-Zoom (PTZ), Infrared Night Vision, Two-Way
Audio

Product Usage Instructions:

1. Getting Started:

Unbox the package and check if all components are included.

IP Camera
Wi-Fi Antenna
Ethernet Cable
Power Adapter
Waterproof Lid
Screwdriver
Expansion Screws

2. Physical Description:

The camera features a built-in microphone, laser IR LEDs for
night vision, light sensor, speaker, and a Micro SD Card Slot for
storage.

3. Setting Up Your Camera:

Connection via the Foscam App:

Before You Get Started:

Scan the QR code below to download and install the Foscam App on
your smartphone.

Plug the power adapter into the camera and wait for the “Ready
for WiFi configuration” prompt.
Tighten the antenna clockwise and ensure it is in a vertical
position.
Connect your smartphone to your Wi-Fi router.
Open the Foscam App, register an account, or sign in if you
have one.
Add the camera by scanning the QR code located on the
device.
Power on the device until you hear “Hello Foscam.”
Keep the device and mobile phone close to the router during
Wi-Fi configuration.

FAQ:

Q: How often should I change the camera’s password?

A: It is recommended to change the camera’s
password regularly, using a combination of numbers, letters, and
special characters for enhanced security.

Q: What are the recommended smartphone specifications for a

smoother video experience?

A: For iOS devices, version 11 or higher is
recommended. For Android devices, a minimum of 5.0 is required,
along with a Graphics Processing Unit (GPU) for optimal
performance.

“`

Quick Setup Guide
Wi-Fi PTZ IP Camera

Setting Up Your Foscam Security Camera
1 Getting Started
Package Contents

IP Camera

Wi-Fi Antenna

Ethernet Cable

Power Adapter Waterproof Lid

Screwdriver
Quick Setup Guide Wi-Fi PTZ IP Camera

Expansion Screws

Quick Setup Guide

To view this guide in other languages (e.g. Nederlands, Deutsch, Français, Español), and for detailed manuals, tools, etc., please visit foscam.com/downloads.
V1.0 305503000884

Security Tips
Please change the camera’s password regularly, using a combination of numbers, letters and special characters.
We recommend that you regularly update your camera with the latest available software and firmware to ensure the best experience with your camera.

2 Physical Description
Antenna

Microphone Laser IR LEDs

Light Sensor Laser IR LEDs Lens
Infrared LED

Reset Power
LAN

Speaker

Micro SD Card Slot

The cords on this product are a potential strangulation hazard. For child safety, please keep these cords out of the reach of children.

3 Setting Up Your Camera:
Connection via the Foscam App (Recommended)
Before You Get Started
Scan the QR code below to download and install the Foscam APP.

2. Plug the power adapter into the camera, and please wait for a few seconds until hearing the “Ready for WiFi configuration”

To ensure a smoother video experience on your smart phone, it is recommended that your smart phone meet the following specifications:
iOS: version 11 or higher. Android: 5.0 or higher, using a device with a Graphics Processing Unit (GPU). Note: For the best experience, please update the APP to the latest version!
Wi-Fi Connection
1. Please tighten the antenna clockwise and make sure it is in a vertical position.

3. Make sure that your smart phone is connected to your WiFi router.

Settings WLAN WLAN
MY NETWORKS
xxxxx_2.4G xxxxx_5G

2.4 GHz Wi-Fi or 5 GHz Wi-Fi

WiFi

4. Open the foscam APP and please register a Foscam account, or sign in if you have one already.

Tighten clockwise

Email address
Password
Forgot Password Accept Privacy Notices and Terms of Seervice
Sign In Sign Up

5. Follow the steps below:

1
My Device

2
Add Device
Add Cameras

Tap to add a device

Add NVR/NVR kits

3
Add Device
< Scan the QR code
Search in LAN
Manually add

4
Scan QR Code

Model: XXX FHD Wireless IP Camera
FCC ID:XXXXX IC:12558A-XX

S/N:FIAI1403000001

UID:XXXXXXXXXXX

Scan QR Code

FMIFCHC:1CDo2IWd5D5:ieX8reXAll:X-eXXXsXsXXIPXCamera

S/N:FIAI1403000001

UID:XXXXXXXXXXX

Please scan the QR code located on your device

Please scaonnthyeouQrRdecvoidceelocated

Model: XXX FHD Wireless IP Camera
FCC ID:XXXXX IC:12558A-XX

S/N:FIAI1403000001

UID:XXXXXXXXXXX

5
Add Device
Power the device on until the device voice prompts “Hello foscam”

6
Wi-Fi configuration
Keep the device and mobile phone close tothe router.

7
Add Camera
<For Wi-Fi configuration, please pion the QR code to the device dirctly.

I have heard”Hello Foscam”
Next

XXXXX_5G WiFi Password
Confirm

The best distance is: 6~12inches (15~30cm
Configure WiFi connecton

8

Tips: Please place the

QR code on the phone

screen about 10 to

15cm (3.94 to 5.9in)

away, and if you

90°
10~15cm

encounter difficulties you can try to move the screen slowly around

3.94~5.9in

10 15cm (3.94 – 5.9in).

9
WiFi connection
<For WiFi configuration, please point the
QR code to the camera directly.

10
Add Camera
<

11
Set name

I have heard the voice prompt “WiFi connecting”
Next

Device Landing..
20%
Please do not exit this app or turn off the device during this process(requires approximately 2 minutes to complete)

Device added successfully Please set the device name:
Garden Living Room Doorway Corridor Garage Balcony Bed Room Kitchen Garden
Save the body QR code
Save the device`s QR code to the mobile system album to help you re-add the device more conveniently
Save

12
My Device
Foscam_camera

13
Camera Login
New camera username
New camera password Re-enter new camera password

14
Garden
Foscam_camera

Submit

Note: If the adding process fails, please reset your camera and try adding again according to the above method.

Reset Button

4 PC Access Your Camera
Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same time. If you would like to manage multiple cameras, we suggest you install Foscam VMS. You can download the “Foscam VMS ” Windows version from foscam.com/vms, and can download the “Foscam VMS” Mac version from the APP store: https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Note: For the best experience, please update Foscam VMS to the latest version!
Add the IP Camera 1. Run Foscam VMS, then create a local administrator account
and login. 2. Tap the “+” icon on the Foscam VMS and follow the setup
wizard to add your camera. Please visit foscam.com/downloads to view the user manual and for additional detailed steps.

5 Hardware Installation
Fixate the camera on your preferred location and use the provided screws to mount it. Please Note: Ensure that the rain or water will not reach the connector ports at the end of the pig tail wiring. These connectors are not weather-resistant.

6 Important Notice
Camera Username & Password The camera username & password are used to access and manage your camera. Having a strong password can significantly improve the security of your camera. If you have forgotten either of them, please press the “Reset” button.
Press and hold the “Reset” button for 3-5 seconds until hearing “reset succeed”.
Reset Button

How to format Micro SD card, please follow the steps below:

1

2

3

4 Scan the QR code below
to download the “FoscamFormat ” Tool
. .226644

5 Open the
“FoscamFormat ” Tool

FoscamFormat

8

×

Foscam Format

Format ready

OK

10

11

Storage Media
Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (supports FAT32 and exFAT format) storage formats.

cloud Storage

NVR

Micro SD card

(FAT32 & exFAT)

foscam.com/downloads/app_software.html

6 Foscam Format

×

Choose the SD card: F: Accept Terms of use1
2 Terms of use
Format 3
2019 (c) Euport BV 3

7
Warning ALL data on disk: I: will be erased, are you sure?
Confirm Cancel

9
Computer

Safety Tips

Prohibit use at high temperature

Prohibit use at low temperature

Keep away from fire

Keep away from children

Not a children’s toy

Use the correct power supply

Keep dry

Caution Electricity

7 Product Performance

Use the supplied screw pack

WLAN frequency range: 2412MHz – 2472MHz and 5725MHz – 5875MHz
Maximum transmission power: < 18.5dBm Wireless Standard: IEEE802.11b/g/n (2.4GHz)
IEEE802.11a/n/ac (5GHz) Power Supply: DC 12V 4.0A 48W

8 Troubleshooting
IP cameras is not powering on If you find your camera is not powering on, please the following: 1. Please check whether the outlet is working properly or not. Try
to plug the camera into a different outlet and see whether it will work. 2. Please check whether the DC adapter is working or not. If you have another 12V/4A power adapter which is working, please try with another power adapter and see whether it will work. 3. If it still won’t work, please contact Foscam support.
How to re-configure the WiFi connection for Foscam cameras after router changed? 1. Please connect the camera to your router with an ethernet cable. If you can see the camera live video on the Foscam app, please go to camera settings–>WiFi settings to choose the new WiFi name and input WiFi password to set up. After the WiFi settings is completed, please disconnect the ethernet cable from the camera and wait for some seconds to connect to the camera. 2. There is a need to reset the camera first. Please refer to https://www.foscam.com/faqs/view.html?id=13 to see the reset steps. Then please open the Foscam app to scan the QR-code of your camera to set up the wireless connection for the camera. Please make sure your cellphone is connected to that new WiFi.
support@foscam.com

CE Certificate statement Website: https://www.foscam.com/company/ce- certificate.html
Exporter and Importer Information Opened to Public: https://www.foscam.com/company/open-information.html

FAQS

Foscam APP

Facebook

Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd Addr: Room 902,Building 1B, Shenzhen International Innovation Valley, Xingke 1st Street, Nanshan District, Shenzhen, Guangdong, China, 518055

www.foscam.com

Due to product upgrades and other reasons, this guide may be slow to update, resulting in slight inconsistencies with the official website information. Please take the official website (www.foscam.com) information as the current standard.