Bharat Photon 9887290763 Fit Sensor Tap for Water Cooler Instruction Manual
- June 15, 2024
- Bharat Photon
Table of Contents
Bharat Photon 9887290763 Fit Sensor Tap for Water Cooler
Operation and working
Characteristics
WALL MOUNTED & LOW ENERGY CONSUMPTION Exposed wall mounted, suitable for all kinds modification works, public toilet, hotel, hospital, airport, bathroom, etc. Low energy consumption, powered by 4pcs AA alkaline batteries. RELIABLE AND FRIENDLY CUSTOMER SERVICE Always be ready to respond within a 24-hour time frame
CUSTOMER SUPPORT
AFTER-SALES SERVICE
Our Customer Support Team is Comprehensively trained to provide help and advice, spare parts or a service visit.
SPARE PARTS
We maintain an extensive stock of spares and aim to have functional parts available for ten years from the date of final manufacture of the product. Spares can be purchased from approved stockists or merchants (locations on request) or direct from our Customer Support Department. Spares direct will normally be dispatched within two working days.
NOTE
In the interest of safety, spares requiring exposure to mains voltages can only be sent to qualified persons.
SERVICE
Our Customer Support Team is available to provide quality service at a reasonable cost. Please contact us at 1800 121 6254 in case of any trouble. We will be happy to assist you as our customers are our family.
A PRODUCT PROUDLY DESIGNED & MANUFACTURED IN INDIA
Introduction
Intelligent sensor urinal valve puffs automatically, it has no-touch activation
and reduces virus through-infection, increasing sanitation and hygiene.
Especially suitable for public toilets, hotel and hospital. Low energy
consumption and water saving.
The cost effective solution to maximise urinal hygiene and water economy.
Specification
Step By Step Installation Guide
- STEP 1: Clean the pipeline by running 1~2 bucket water until dust particles like cement pieces or thread etc. are washed away
- STEP 2: Install 4 X AA size alkaline batteries (Duracell) by unscrewing the lid lock and opening the lid.
- STEP 3: Now system gets activated as blinking red indicator appears in sensor eye on sensing.
- STEP 4:Install the swivel nut coupling on the fixed pipe from wall and connect the swivel nut end to the inlet of the unit.
- STEP 5: Connect the outlet of unit from bottom to the urinal pot.
NOTE : Red blinking indicator is for sensing which must be done for 7-8 seconds continuously in order to lock operation.
Installation Layout
A PRODUCT PROUDLY DESIGNED & MANUFACTURED IN INDIA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>