141078192 Microtech Wireless Double Force Caliper Microtech User Manual

141078192 Microtech Wireless Double Force Caliper Microtech

“`html

Specifications:

• Brand: MICROTECH
• Website: www.microtech.tools
• IP Rating: IP67
• Origin: Swiss
• Features: Wireless, Double Force, Calibration ISO 17025:2017,
  ISO 9001:2015

Product Usage Instructions:

Caliper Range and Resolution:

The caliper is available in various ranges (mm and inch) with
corresponding resolutions as follows:

Battery Replacement:

If the display blinks or is absent, follow these steps for
battery replacement:

1. Open the battery cover.
2. Insert a CR2032 battery with correct polarity.
3. Close the cover.

Measuring Procedures:

External Measuring with Force 8N:

1. Contact external jaws to each other for zero setting.
2. Push Force roll up to double-lines on the left side.

Internal Measuring with Force 4N:

1. Contact internal jaws inside the setting ring.
2. Preset the setting ring size on the caliper.
3. Push Force roll up to right lines on the Force indicator and
   press SET button for 2 seconds.

Power Consumption Modes:

• WIRELESS OFF
• WIRELESS TO MDS
• STANDARD ECO (GATT)
• WIRELESS HID
• WIRELESS HID+MAC

Frequently Asked Questions (FAQ):

Q: How do I connect the caliper wirelessly to the MDS app?

A: Switch on the wireless module by pressing the button for 2
seconds. In the WIRELESS TO MDS mode, the display will blink until
it connects to the MDS app. You can then select STANDARD or ECO
sub-mode for data transfer.

Q: What is the recommended mode for battery economy?

A: The ECO mode is recommended for battery economy as it allows
data transfer without continuous indication, saving power.

Q: How can I download the MICROTECH MDS app?

A: You can download the MICROTECH MDS app for Windows, Android,
iOS, and MacOS from the official website at
www.microtech.tools.

“`

MICROTECH
WWW.MICROTECH.TOOLS

IP67

SWISS
ELECTRONICS

WIRELESS TO MDS APP WIRELESS HID+MAC

DOUBLE FORCE
EXT 8N INT 4N

WIRELESS DOUBLE FORCE CALIPER MICROTECH
USER MANUAL

Calibration ISO 17025:2017

ISO 9001:2015

MICROTECH

MODIFICATIONS

WIRELESS DOUBLE FORCE CALIPER IP67

Item No

Range mm inch

Resolution Accuracy*
mm m

Double
force N

Display

Protection

Carbide jaws

Wireless data output

141078192 141078192C

0-150

0-6″

141078292 141078229C

0-200

0-8″

0,01

141078392 141078329C

0-300

0-12″

±10 ±10

8 ext

Swiss Digit

4 int

height 11mm

IP-67

· ·

±20

·

· · · · · ·

MICRON WIRELESS DOUBLE FORCE CALIPER IP67

Protection Preset mm/inch
Auto on/off WIRELESS

Item No

Range

Reso- Accu- Double lution racy* force

Jaws

mm inch mm m N mm

141079192 0-150 0-6″

±5 8 ext 40/16

· ···

141079292 0-200 0-8″ 0,001 ±8

50/17 IP-67 · · · ·

141079392 0-300 0-12″

±10 4 int 60/20

· ···

*MAX ERROR FOR INTERNAL END DEPTH MEASUREMENTS DIN-862
INSTRUMENT FIGURE

RANGE
0-150 0-200 0-300

DIMENSIONS A B CD E mm mm mm mm mm 235 40 10 16 16 290 50 10 18 16 395 60 11 21 16

G Display Protection

mm

IP

4×1,4 Swiss 4×1,4 Digit height IP-67 4×1,4 11mm

BUTTONS MODE

MICROTECH

DATA WIRELESS to MDS

2s

5s

WIRELESS HID
5s 5s

WIRELESS HID+MAC

SET

BATTERY REPLACEMENT
If necessary, open the battery cover; insert the battery (type CR2032) according to the polarity of the electrodes. Blinking display information or absence suggests replacing battery.

MICROTECH
DOUBLE FORCE CONTROL MEASURING
WIRELESS TO MDS APP WIRELESS HID+MAC
DOUBLE FORCE

EXTERNAL MEASURING with FORCE 8N
ZERO SETTING FOR EXTERNAL – Contact external jaws to each other
8N – Push Force roll up to double-lines comes left
on Force indicator and press SET button 2s. EXTERNAL MEASURING – When double- lines on Force indicator in left position – Measuring Force on External jaws 8±2N.

4N

INTERNAL MEASURING with FORCE 4N

PRESET INTERNAL VALUE

– Contact internal jaws inside setting ring

– PRESET setting ring size on caliper

– Push Force roll up to right lines on Force

indicator and press SET button 2s.

4N

INTERNAL MEASURING

– When double-lines on Force indicator in right position – Measuring

Force on Internal jaws 4±1N.

CORRECT MEASURING

MICROTECH

POWER CONSUMPTION

MODE

WIRELESS OFF

WIRELESS TO MDS

STANDARD ECO (GATT)

WIRELESS HID

WIRELESS HID+MAC

TRANSFER DATA 45 A 2.0 mA
45-100 A 0.4 mA 0.4 mA

WARNING!
IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED: Scratches on the measuring surfaces; Measuring the size of object in the process of machining; Shocks or dropping, avoid bending of rod or other surfaces.

MICROTECH WIRELESS DATA TRANSFER CONNECTION
WIRELESS TO MDS APP CONNECTION

SWITCH ON WIRELESS module push button 2 sec; In WIRELESS TO MDS non-stop blinking on display up to connection to MDS app and selecting STANDARD or ECO sub-mode. In STANDARD submode data transfer 4 times/sec and all time on display. Push button to save data to MDS app or use buttons and Timer inside app. In ECO (GATT) submode caliper ready to transfer data any time with no indication. Push button to save data on MDS app.

ECO mode recomended for battery economy
DOWNLOAD MICROTECH MDS APP
Link to to Download MICROTECH MDS app for Windows, Android, iOS, MAcOS on www.microtech.tools

DOWNLOAD APP

WIRELESS HID CONNECTION
For selecting next mode push 5 sec. WIRELESS HID and WIRELESS HID+MAC blinking 2 sec on display and will be ready for searching on Tablet, Smartphone or Computer Bluetooth connections. After succesfull connection save data to customers app with push button.
You can easily identify the current mode by searching for WIRELESS devices, where the device name will indicate the mode, either MICROTECH HID or MICROTECH HID + MAC.
NOTICE: Always remember to disconnect and remove the device from your Bluetooth settings before changing modes to avoid conflicts and ensure a smooth transition.

WIRELESS DATA TRANSFER MODES

MICROTECH

MICROTECH caliper with Built-in Wireless data output module for transfer results

MODE

TRANSFER DATA Switch ON Switch OFF

Select MODE

DATA send

indic.

STANDARD

WIRELESS

MICROTECH MDS app

TO MDS

Windows, Android, iOS, MacOS

ECO (GATT)

2s. auto switch off when disconnect STANDARD or ECO in MDS app
all time active

blinking non stop
no

push, or on MDS app

WIRELESS HID

Direct to any customer

WIRELESS HID+MAC app (like keyboard)

auto switch off

5s.

2s when disconnect or
no data 10 min

and connect BT on PC or Tablet

blinking non stop

push

DATA WIRELESS to MDS

2s

5s

WIRELESS HID
5s 5s

WIRELESS HID+MAC

VIDEO MANUAL
Video manual with Connection on MICROTECH YouTube https://www.youtube.com /@Microtech-Instrumentsor by QR code scanning

MICROTECH

INDUSTRY 4.0 INSTRUMENTS

0,1m

1m

FORCE CONTROL

1-20N

0,1m

0,1m
MICROTECH innovative measuring instruments
61001, Kharkiv, Ukraine, str. Rustaveli, 39 tel.: +38 (057) 739-03-50 www.microtech.ua tool@microtech.ua

1m
Change without prior notice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>