DIGITUS DN-10050-1 10 100 Mbps Network USB Adapter Installation Guide
- September 24, 2024
- DIGITUS
Table of Contents
DIGITUS DN-10050-1 10 100 Mbps Network USB Adapter
Specifications
- Product Name: 10/100M NETWORK USB ADAPTER
- Interface: USB 2.0
- Speed: Up to 100Mbps
- Compatibility: USB 1.1 and 2.0, IEEE 802.3 10BASE-T/100BASE-TX
- Power: Bus-powered
Product Usage Instructions
Hardware Installation
- Plug the DN-10050-1 directly into an available USB port on your computer.
- Connect the network cable into the RJ45 port of the DN-10050-1.
- Connect the other end of the network cable into an available Ethernet port on your router, switch, or any other network device.
Quick Installation Guide
DN-10050-1 Rev. 3
Product Introduction
DN-10050-1 is an USB 2.0 to Fast Ethernet Adapter that provides computer
system with Ethernet link speed up to 100Mbps. It is backward compatible with
USB 1.x. This compact and portable adapter is ideal as a desktop network
adapter or laptop accessory.
Features
- Compliant with the Standard Specification of USB 1.1 and 2.0
- Integrates 10/100Mbps Fast Ethernet MAC/PHY
- IEEE 802.3 10BASE-T/100BASE-TX compatible
- Support full Duplex Operation 10/100Mbps modes
- Support USB Full and High-Speed modes with bus power capacity
- Supports Suspend mode and Remote Wakeup via Link-up
- Upstream port: USB type A
- Downstream port: RJ45
- Support Windows® 7/8/10/11(32/64 bit); MacOS 10.4 or later
System Requirements
- Windows® 7/8/10/11 (32/64 bit), MacOS 10.4 or later
- An USB port
Package Contents
- 1x USB 2.0 to Fast Ethernet Adapter
- 1x User Manual
Hardware Installation
- Plug DN-10050-1 directly into an available USB port on your computer.
- Connect the network cable into the RJ45 port of DN-10050-1
- Connect the other end of the network cable into an available Ethernet port on your router, switch, or any other network device.
Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
FAQ
Q: What are the system requirements for the DN-10050-1 USB Adapter?
A: The system requirements include having an available USB port on your
computer.
Q: Is the DN-10050-1 USB Adapter compatible with MacOS?
A: Yes, the DN-10050-1 USB Adapter is compatible with MacOS 10.4 or
later.
Q: Can the DN-10050-1 USB Adapter support full duplex operation?
A: Yes, the DN-10050-1 USB Adapter supports full duplex operation in
10/100Mbps modes.
info@assmann.com ASSMANN Electronic GmbH
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>