Adaprox ADCBZI02 Curtain Robot User Manual

ADCBZI02 Curtain Robot

“`html

Specifications:

• Model: ADCBZI02
• Protocol: Zigbee 3.0
• Power Adapter: 5V/1A with Type-C interface

Product Overview:

The curtain robot is an innovative smart home device that
transforms traditional curtains into smart curtains. It seamlessly
integrates into your home automation system, allowing remote
control and automated operations.

Device Charging:

It is recommended to use a 5V/1A power adapter with a Type-C
interface charging cable to charge the product.

Device Pairing:

To pair your Curtain Robot with the Smart Life App, press and
hold the reset button for 5 seconds until the blue light starts
flashing. Then follow the on-screen instructions in the app to
complete the pairing process.

Device Setup:

Preparation work:

1. Wipe the track and dry it before installing the equipment.
2. Hang the removed hook on the front hook and reserve two hooks
   in the installation position.

To install your curtain robot:

1. Slide down from the main body of the robot to remove the hook
   accessories on both sides.

2. Adjust the hooks to the topmost position using the knobs on the
   sides.

3. Attach the hooks to the corresponding curtain rings on both
   sides.

4. Reassemble the main body of the curtain robot with the hooks on
   both sides.

5. Adjust the knobs on both sides to ensure the top wheels of the
   curtain robot fit snugly against the curtain track.

Device Control:

Curtain Calibration:

1. Pull the curtains to the fully closed position and correctly
   install the curtain robot.

2. Calibrate the curtain robot following the steps provided.

Device Triggering:

Tap the Open icon to open the curtains and the Close icon to
close them. For precise control, use the slideable buttons above
the curtain to adjust its position. Avoid manually pulling the
curtains while the curtain robot is in operation.

Curtain Follow (2 curtain robots required):

To make device 2 perform the same or opposite action as device
1, follow the steps provided in the Tuya Smart App.

FAQ:

Q: Can I use a different power adapter for charging?

A: It is recommended to use a 5V/1A power adapter with a Type-C
interface for charging to ensure optimal performance.

Q: Can I install the curtain robot on any type of curtain

track?

A: This product is suitable for I-shaped track and U-shaped
track curtain tracks. Make sure to follow the installation
instructions for best results.

Q: How do I troubleshoot if my curtain robot is not responding

to commands?

A: Try resetting the device and re-pairing it with the Smart
Life App. Ensure that the device is properly calibrated and
installed according to the instructions provided.

“`

ADCBZI02
ProductOverview
Thecurtainrobotisaninnovativesmarthomedevicethattransformsyourhome’straditional curtainsintosmartcurtains.UsingtheadvancedZigbee3.0protocol,thisrobotcanseamlessly integrateintoyourhomeautomationsystem,enablingremotecontrolandautomated operations.Installationissimple,withnoneedtoreplaceexistingcurtains,allowingyouto enjoytheconvenienceofsmartliving.Whetherthroughamobileapporautomatedscenarios, youcaneasilycontroltheopeningandclosingofyourcurtains,addingcomfortandamodern touchtoyourhomelife.
Operationvideo.mp4
134.07MB

Devicecharging
Itisrecommendedtousea5V/1ApoweradapterwithaType-Cinterfacechargingcableto chargetheproduct.

DevicePairing
SmartLifeAppisthemobileplatformforcontrollingIoTdevices.Youcansearch”SmartLife”in themobileapplicationstoretoinstalltheApp. WhenpairingyourCurtainRobotwithyouraccount,youneedtoresetthedevice.Pleasepress andholdtheresetbuttonfor5secondsuntilthebluelightstartsflashing,indicatingthatthe deviceisnowinpairingmode.
Tapthe”+”iconatthetoprightcornerintheapp,thenclickthe”AddDevice”button.Inthe “DiscoverDevices”section,select”CurtainRobot”andclick”Add”.Followtheon-screen

instructionstocompletethedevicepairing.
DeviceSetup
Preparationwork: 1. Beforeinstallingtheequipment,wipethetrackanddryit,thenremovethecurtainhookat
theinstallationposition. 2. Hangtheremovedhookonthefronthookandreservetwohooksintheinstallationposition
toinstallthecurtainrobot.

Toinstallyourcurtainrobot: 1. Slidedownfromthemainbodyoftherobottoremovethehookaccessoriesonbothsides. 2. Adjustthehookstothetopmostpositionusingtheknobsonthesides. 3. Attachthehookstothecorrespondingcurtainringsonbothsides. 4. Reassemblethemainbodyofthecurtainrobotwiththehooksonbothsides. 5. Adjusttheknobsonbothsidestoensurethetopwheelsofthecurtainrobotfitsnugly
againstthecurtaintrack.
Tip:Duringinstallation,youcantiltthecurtainrobottotheleftandrighttoeasilyadjustthe
tightnessofthesideknobs.ThisproductissuitableforcurtaintrackI- shapedtrackandUshapedtrack.

DeviceControl
CurtainCalibration Beforeusingthecurtainrobot,pleasecalibrateitbyfollowingthesesteps 1. Pullthecurtainstothefullyclosedpositionandcorrectlyinstallthecurtainrobot. 2. Afterenteringthedevicepanel,clickon”Calibrate”. 3. Select”Indoor”or”Outdoor”accordingtotheorientationofthecurtainrobotbutton,and
clickNext. 4. SelectthetrackdirectionwherethecurtainislocatedandclickNext. 5. SelectthecurtaintypeandclickNext. 6. Clickthestartbuttontostartcalibration. 7. Whenthecurtainsarefullyopen,immediatelyclickthestopbuttontocompletethe
calibration. 8. Calibrationsuccessful,click”Confirm”tojumptothecontrolinterfacetocomplete
calibration.

DeviceTriggering
Afterenteringthedevicepanel,tapthe”Open”icontomakethecurtainrobotmoveinthe directionthatopensthecurtains,andthe”Close”icontomakeitmoveinthedirectionthat closesthem.Theactionswilloccurwithin3secondsiftheconnectionisstrong.Forprecise control,youcanadjustthecurtainstoanypositionusingthetwoslideablebuttonslocated abovethecurtain.

Note:Forbestperformance,avoidmanuallypullingthecurtainswhilethecurtainrobotisin operation.
DoubleCurtains(2curtainrobotsrequired) Aftercompletingthecalibrationoftheleftandrightcurtains,youcancontroltheopeningor closingofbothsidessimultaneouslybyfollowingthesesteps: 1.Click”+”intheupperrightcorneroftheTuyaSmartAPP. 2.Click”CreateScene.” 3.Click”LaunchTap-to-Run.” 4.Select”AddTask.” 5.Inthetaskselectionbox,choose”ControlSingleDevice”andselectthecurtainrobotyou wanttocontrol.Choose”Open/Close”undercontrol. 6.Repeatstep5toaddtheothercurtainrobot. 7.Createanameforthetap-to- run,suchas”CurtainsOpen,””CurtainsClosed,”etc.

CurtainFollow(2curtainrobotsrequired) Aftercompletingthecalibrationoftheleftandrightcurtains,youcanmakedevice2performthe sameoroppositeactionasdevice1byfollowingthesesteps: 1.Click”+”intheupperrightcorneroftheTuyaSmartAPP. 2.Click”CreateScene.” 3.Click”Whendevicestatuschanges.” 4.Inthe”If “section,Select”CurtainRobotR”andchoose”Control:Open” 5.Inthe”Then”section,add”CurtainRobotL”andchoose”Open/Close”undercontrol. 6.Createanameforthescene,suchas”OpenFollow,””CloseFollow,”etc.

7.Repeatsteps1-6toaddasmanysmartscenesasyouwant.
UseofRomanpoles
WhenthedistancebetweenthepullringhookpositionoftheRomanpoleandthebottomend ofthepoledoesnotexceed24millimeters,thisproductcanbedirectlyappliedwithoutthe needtopurchaseadditionalRomanpoleaccessories.Pleaserefertotheattachedexample diagramformoredetailsforintuitiveunderstanding.

Warning
Thisproductisnotwaterproof.Itcontainsbatteriesandthereforeshouldnotbeusedindampor high- temperatureenvironments.Donotobstructthemovementofthecurtainrobotwhileitis operating,asthismaycausedamagetotheinternalmechanicalstructureandtheinternal motor.

Specifications

Dimensions:95x43x140mm

Weight:312grams

Wirelessprotocol:Zigbee3.0

Batterytype:3.7Vlithiumbattery

Workingtemperature:0

45 /32

113

Workinghumidity:0to95%RH,non-condensing

Packagecontent:1CurtainRobot

FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>