aegex AX210 WiFi Network Card Instruction Manual

AX210 WiFi Network Card

“`html

Product Information

Specifications:

• Model: ADEO-001-01

• Designed for: Home and business use

• Features: Access WiFi networks, share files or printers, share
  Internet connection

• Manufacturer: Intel Corporation

• Trademark: Intel and Aegex

Product Usage Instructions

Adapter Settings:

The Advanced tab displays the device properties for the WiFi
adapter installed on your computer.

How to Access:

Double-click on the Intel WiFi adapter in the Network adapters
section of the Device Manager and select the Advanced tab.

A description of the WiFi adapter settings on the Advanced tab
can be found
here.

Regulatory Information

Due to the evolving state of regulations and standards in the
wireless LAN field (IEEE 802.11 and similar standards), the
information provided herein is subject to change. Intel Corporation
assumes no responsibility for errors or omissions in this
document.

Information for the User

Safety Notices:

• USA FCC Radio Frequency Exposure: The wireless
  adapter meets the Human Exposure requirements found in FCC Part 2,
  15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB

• Explosive Device Proximity Warning: Do not
  operate a portable transmitter (including this wireless adapter)
  near unshielded blasting caps or in an explosive environment unless
  the transmitter has been modified to be qualified for such
  use.

FAQ

Q: Can additional users and features be added to the WiFi

network solution?

A: Yes, additional users and features can be added as your
networking needs grow and change.

“`

Intel® 6E AX210 Wi-Fi Adapter Manual
ADEO-001-01

This Information Guide is produced by Aegex Technologies, LLC and is based on the Intel® Wi-Fi Information Guide.
ADEO-001-01

Intel® WiFi Adapter Information Guide
This version of Intel® PROSet/Wireless WiFi Software is compatible with the adapter listed below. Note that newer features provided in this software are generally not supported on older generations of wireless adapters.
The following adapter is supported in Windows* 10: · Intel® Wi-Fi 6E AX210

With your WiFi network card, you can access WiFi networks, share files or printers, or even share your Internet connection. All these features can be explored using a WiFi network in your home or office. This WiFi network solution is designed for both home and business use. Additional users and features can be added as your networking needs grow and change.
This guide contains basic information about Intel adapters. Intel® wireless adapters enable fast connectivity without wires for desktop and notebook PCs.
· Adapter Settings · Regulatory and Safety Information · Specifications · Support · Warranty
Depending on the model of your Intel WiFi adapter, your adapter is compatible with 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac and 802.11ax wireless standards. Operating at 5GHz or 2.4GHz frequency, you can now connect your computer to existing high-speed networks that use multiple access points within large or small environments. Your WiFi adapter maintains automatic data rate control according to the access point location and signal strength to achieve the fastest possible connection.

Information in this document is subject to change without notice. Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein.
IMPORTANT NOTICE FOR ALL USERS OR DISTRIBUTORS:
Intel wireless LAN adapters are engineered, manufactured, tested, and quality checked to ensure that they meet all necessary local and governmental regulatory agency requirements for the regions that they are designated and/or marked to ship into. Because wireless LANs are generally unlicensed devices that share spectrum with radars, satellites, and other licensed and unlicensed devices, it is sometimes necessary to dynamically detect, avoid, and limit usage to avoid interference with these devices. In many instances Intel is required to provide test data to prove regional and local compliance to regional and governmental regulations before certification or approval to use the
ADEO-001-01

product is granted. Intel’s wireless LAN’s EEPROM, firmware, and software driver are designed to carefully control parameters that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include, without limitation, RF power, spectrum usage, channel scanning, and human exposure.
For these reasons Intel cannot permit any manipulation by third parties of the software provided in binary format with the wireless LAN adapters (e.g., the EEPROM and firmware). Furthermore, if you use any patches, utilities, or code with the Intel wireless LAN adapters that have been manipulated by an unauthorized party (i.e., patches, utilities, or code (including open source code modifications) which have not been validated by Intel), (i) you will be solely responsible for ensuring the regulatory compliance of the products, (ii) Intel will bear no liability, under any theory of liability for any issues associated with the modified products, including without limitation, claims under the warranty and/or issues arising from regulatory non- compliance, and (iii) Intel will not provide or be required to assist in providing support to any third parties for such modified products.
Note: Many regulatory agencies consider Wireless LAN adapters to be “modules”, and accordingly, condition system-level regulatory approval upon receipt and review of test data documenting that the antennas and system configuration do not cause the EMC and radio operation to be noncompliant.
Aegex and the Aegex logo are trademarks of Aegex Corporation in the U.S. and/or other countries.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
*Other names and brands may be claimed as the property of others.
© Intel Corporation.

Adapter Settings
The Advanced tab displays the device properties for the WiFi adapter installed on your computer.
How to Access
Double-click on the Intel WiFi adapter in the Network adapters section of the Device Manager and select the Advanced tab.
A description of the WiFi adapter settings on the Advanced tab can be found here: https://www.intel.com/content/www/us/en/support/articles/000005585 /network-and-io/wireless-networking.html

Regulatory Information
This section provides regulatory information for the following wireless adapter: · Intel® Wi-Fi 6E AX210
ADEO-001-01

NOTE: Due to the evolving state of regulations and standards in the wireless LAN field (IEEE 802.11 and similar standards), the information provided herein is subject to change. Intel Corporation assumes no responsibility for errors or omissions in this document.

INFORMATION FOR THE USER
Safety Notices
USA FCC Radio Frequency Exposure
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure requirements found in FCC Part 2, 15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB 616217. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC’s recommended limits.
The following safety precautions should be observed: · Do not touch or move antenna while the unit is transmitting or receiving. · Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. · Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio. · Use in specific environments: · The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety · directors of such environments. · The use of electronic devices equipped with wireless adapters on airplanes is governed by rules for each commercial airline operator. · The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital.
Explosive Device Proximity Warning
Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use.
Antenna Warnings
Warning: The wireless adapter is not designed for use with high-gain directional antennas.
Use On Aircraft Caution
ADEO-001-01

Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronic devices equipped with radio-frequency wireless devices (wireless adapters) because their signals could interfere with critical aircraft instruments.
Caution: 60 GHz/802.11ad equipment is not permitted on aircraft per FCC §15.255. OEM and host integrators should consider this FCC rule in host devices.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other devices in the wireless network.
Local Restrictions on 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac, and 802.16e Radio Usage
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac, and 802.16e wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac, and 802.16e products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. The device transmit power control (TPC) interface is part of the Intel® PROSet/Wireless WiFi Connection Utility Software. Operational restrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
Wireless Interoperability The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread spectrum (DSSS) radio technology and to comply with the following standards:
· IEEE Std. 802.11b compliant Standard on Wireless LAN · IEEE Std. 802.11g compliant Standard on Wireless LAN · IEEE Std. 802.11a compliant Standard on Wireless LAN · IEEE Std. 802.11n draft 2.0 compliant on Wireless LAN · IEEE 802.16e-2005 Wave 2 compliant · Wireless Fidelity certification, as defined by the Wi-Fi Alliance · WiMAX certification as defined by the WiMAX Forum
The Wireless Adapter and Your Health The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research
ADEO-001-01

literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:
· Using the wireless adapter on board airplanes, or · Using the wireless adapter in any other environment where the risk of interference with
other devices or services is perceived or identified as being harmful.
If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on.

REGULATORY INFORMATION
USA – Federal Communications Commission (FCC)
This wireless adapter is restricted to indoor use due to its operation in the 5.15 to 5.25 and 5.470 to 5.75GHz frequency ranges. No configuration controls are provided for Intel® wireless adapters allowing any change in the frequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the FCC rules.
· Intel® wireless adapters are intended for OEM integrators only. · Intel® wireless adapters cannot be co-located with any other transmitter unless approved by
the FCC.
This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:
· This device may not cause harmful interference. · This device must accept any interference that may cause undesired operation.
Class B Device Interference Statement
This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:
· Reorient or relocate the receiving antenna of the equipment experiencing the interference. · Increase the distance between the wireless adapter and the equipment experiencing the
interference. · Connect the computer with the wireless adapter to an outlet on a circuit different from that
to which the equipment experiencing the interference is connected.
ADEO-001-01

· Consult the dealer or an experienced radio/TV technician for help.
NOTE: The adapter must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations.

Safety Approval Considerations
This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:
· It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 60950-1 2nd edition including the general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure).
· The device shall be supplied by a SELV source when installed in the end-use equipment. · A heating test shall be considered in the end-use product for meeting the requirement of
UL/EN/IEC 60950-1 2nd edition.

Low Halogen
Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB / substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment.

Japan 5GHz

Korea . 5150-5250MHz .

Mexico La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

Taiwan
ADEO-001-01

. . , 5.25-5.35

Radio Approvals
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer’s OEM Regulatory Guidance document.

Modular Regulatory Certification Country Markings
A list of countries requiring regulatory markings is available. Note that the lists include only countries requiring marking but not all certified countries. To find the regulatory country marking information for your adapter, perform these steps:
1. Open this web site: http://www.intel.com/content/www/us/en/support /network-and-io/wirelessnetworking/000007443.html
2. Click on the link for your adapter. 3. Click on Regulatory Marking Document for your adapter.

INFORMATION FOR OEMs and HOST INTEGRATORS
The guidelines described within this document are provided by Intel® to OEM integrators installing Intel® wireless adapters in notebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions of compliance with FCC rules, including RF exposure. When all antenna type and placement guidelines described herein are fulfilled the Intel® wireless adapters may be incorporated into notebook and tablet PC host platforms with no further restrictions. If any of the guidelines described herein are not satisfied it may be necessary for the OEM or integrator to perform additional testing and/or obtain additional approval. The OEM or integrator is responsible to determine the required host regulatory testing and/or obtaining the required host approvals for compliance.
· Intel® wireless adapters are intended for OEMs and host integrators only. · The Intel® wireless adapter FCC Grant of Authorization describes any limited conditions
of modular approval. · The Intel® wireless adapters must be operated with an access point that has been approved
for the country of operation.
ADEO-001-01

· Changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties is not permitted. Any changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties will void authorization to operate the adapter.

Antenna Type and Gains
Only antennas of the same type and with equal or less gains as 3dBi for the 2.4GHz band and 5dBi for the 5GHz band shall be used with the Intel® wireless adapters. Other types of antennas and/or higher gain antennas may require additional authorization for operation. For testing purposes the following dual band antenna that approximates closely the above limits was used:

Antenna Antenna Location 2.4GHz Peak 5.2GHz Peak 5.5GHz Peak 5.7GHz Peak

Type

(Main/Aux)

Gain in dBi Gain in dBi Gain in dBi Gain in dBi

PIFA

Main Aux MIMO

3.24

3.73

4.77

4.77

*All antenna gains include cable loss. ____

Antenna Placement Within the Host Platform

To ensure RF exposure compliance the antenna(s) used with the Intel® wireless adapters must be installed in notebook or tablet PC host platforms to provide a minimum separation distance from all persons, in all operating modes and orientations of the host platform, with strict adherence to the table below. The antenna separation distance applies to both horizontal and vertical orientation of the antenna when installed in the host system.

Intel® Wireless Adapter

Minimum required antenna-to-user separation distance

Intel® Centrino® Wireless-N + WiMAX 6150 18 mm

Intel® Centrino® Wireless-N + WiMAX 6350 17 mm

Simultaneous Transmission of Intel® Wireless Adapters with Other Integrated or Plug-In Transmitters

Based upon FCC Knowledge Database publication number 616217 when there are multiple transmitting devices installed in a host device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test requirements. OEM integrators must identify all possible combinations of simultaneous transmission configurations for all transmitters and antennas installed in the host system. This includes transmitters installed in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC KDB 616217 document for all details in making this assessment to determine if any additional requirements for testing or FCC approval is necessary.

ADEO-001-01

Information To Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating the Intel® wireless adapter, in compliance with local regulations. Host system must be labeled with “Contains FCC ID: XXXXXXXX”, FCC ID displayed on label.
The Intel® wireless adapter must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Intel Corporation is not responsible for any radio or television interference caused by unauthorized modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.
China:

Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11e Radio Usage The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g and 802.11n products.
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.

Intel WiFi Adapter, 802.11n and 802.11ac Compliant
The information in this section applies to the following product: · Intel® Wi- Fi 6E AX210
See Specifications for complete wireless adapter specifications.
ADEO-001-01

NOTE: In this section, all references to the “wireless adapter” refer to all adapters listed above.
The following information is provided: · Information for the User · Regulatory Information · Regulatory ID · Information for OEMs and Host Integrators · Statements of European Compliance

INFORMATION FOR THE USER
Safety Notices
USA FCC Radio Frequency Exposure The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure requirements found in FCC Part 2, 15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB 616217. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC’s recommended limits. The following safety precautions should be observed:
· Do not touch or move antenna while the unit is transmitting or receiving. · Do not hold any component containing the radio such that the antenna is very close or
touching any exposed parts of the body, especially the face or eyes, while transmitting. · Do not operate the radio or attempt to transmit data unless the antenna is connected; this
behavior may cause damage to the radio. · Use in specific environments:
· The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety
· directors of such environments. · The use of wireless adapters on airplanes is governed by the Federal Aviation
Administration (FAA). · The use of wireless adapters in hospitals is restricted to the limits set forth by each
hospital.
Explosive Device Proximity Warning
Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use.
Use On Aircraft Caution
ADEO-001-01

Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronic devices equipped with radio-frequency wireless devices (wireless adapters) because their signals could interfere with critical aircraft instruments.
Caution: 60 GHz/802.11ad equipment is not permitted on aircraft per FCC §15.255. OEM and host integrators should consider this FCC rule in host devices.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other devices in the wireless network.
Local Restrictions on 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and 802.11ac Radio Usage
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and802.11ac wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and 802.11ac products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. The device transmit power control (TPC) interface is part of the Intel® PROSet/Wireless WiFi Connection Utility Software. Operational restrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
Wireless Interoperability
The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread spectrum (DSSS) radio technology and to comply with the following standards:
· IEEE Std. 802.11b compliant Standard on Wireless LAN · IEEE Std. 802.11g compliant Standard on Wireless LAN · IEEE Std. 802.11a compliant Standard on Wireless LAN · IEEE Std. 802.11n compliant Standard on Wireless LAN · IEEE Std. 802.11ac draft compliant on Wireless LAN · Wireless Fidelity certification, as defined by the Wi-Fi Alliance
The Wireless Adapter and Your Health
The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by
ADEO-001-01

the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:
· Using the wireless adapter on board airplanes, or · Using the wireless adapter in any other environment where the risk of interference with
other devices or services is perceived or identified as being harmful.
If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on.

REGULATORY INFORMATION
USA – Federal Communications Commission (FCC) This wireless adapter is restricted to indoor use due to its operation in the 5.15 to 5.25 and 5.470 to 5.75GHz frequency ranges. No configuration controls are provided for Intel® wireless adapters allowing any change in the frequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the FCC rules.
· Intel® wireless adapters are intended for OEM integrators only. · Intel® wireless adapters cannot be co-located with any other transmitter unless approved by
the FCC.
This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:
· This device may not cause harmful interference. · This device must accept any interference that may cause undesired operation.
NOTE: The radiated output power of the adapter is far below the FCC radio frequency exposure limits.
Nevertheless, the adapter should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20cm between you (or any other person in the vicinity), or the minimum separation distance as specified by the FCC grant conditions, and the antenna that is built into the computer. Details of the authorized configurations can be found at http://www.fcc.gov/oet/ea/ by entering the FCC ID number on the device.

Class B Device Interference Statement
This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio
ADEO-001-01

communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:
· Reorient or relocate the receiving antenna of the equipment experiencing the interference. · Increase the distance between the wireless adapter and the equipment experiencing the
interference. · Connect the computer with the wireless adapter to an outlet on a circuit different from that
to which the equipment experiencing the interference is connected. · Consult the dealer or an experienced radio/TV technician for help.
NOTE: The adapter must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations.

Safety Approval Considerations
This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:
· It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 60950-1 2nd edition including the general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure).
· The device shall be supplied by a SELV source when installed in the end-use equipment. · A heating test shall be considered in the end-use product for meeting the requirement of
UL/EN/IEC 60950-1 2nd edition.

Low Halogen
Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB /substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment.

Canada ­ Industry Canada (IC) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil se conforme aux normes Canada d’Industrie de RSS permis-exempt. L’utilisation est assujetti aux deux conditions suivantes: (1) cet appareil ne peut pas causer d’interférences, et (2) cet
ADEO-001-01

appareil doit accepter des interférences , y compris des interférences qui peuvent causer desopérations non désirées de l’appareil.
Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15GHz to 5.25GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85GHz frequency range in point-to-point operation. To comply with RF exposure requirements all antennas should be located at a minimum distance of 20cm, or the minimum separation distance allowed by the module approval, from the body of all persons.
Attention: l’utilisation d’un réseau sans fil IEEE802.11a est restreinte à une utilisation en intérieur à cause du fonctionnement dans la bande de fréquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit utilisé à l’intérieur des bâtiments pour la bande de fréquence 5.15-5.25 GHz afin de réduire les possibilités d’interférences nuisibles aux canaux co-existants des systèmes de transmission satellites. Les radars de puissances ont fait l’objet d’une allocation primaire de fréquences dans les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuvent créer des interférences avec ce produit et/ou lui être nuisible. Le gain d’antenne maximum permissible pour une utilisation avec ce produit est de 6 dBi afin d’être conforme aux limites de puissance isotropique rayonnée équivalente (P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionnement point-àpoint. Pour se conformer aux conditions d’exposition de RF toutes les antennes devraient être localisées à une distance minimum de 20 cm, ou la distance de séparation minimum permise par l’approbation du module, du corps de toutes les personnes.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Selon les règlements de Canada d’Industrie, cet émetteur de radio peut seulement fonctionner en utilisant une antenne du type et de gain maximum (ou moindre) que le gain approuvé pour l’émetteur par Canada d’Industrie. Pour réduire lesinterférences radio potentielles avec les autres utilisateurs, le type d’antenne et son gain devraient être choisis de façon à ce que la puissance isotrope rayonnée équivalente(P.I.R.E.) ne soit pas supérieure à celle qui est nécessaire pour une communication réussie.
European Union
The low band 5.15 – 5.35GHz is for indoor use only.
ADEO-001-01

This equipment complies with the essential requirements of the European Union directive 2014/53/EU. See Statements of European Union Compliance. European Union Declarations of Conformity To view the European Union Declaration of Conformity for your adapter, perform these steps.
1. Open this web site: http://www.intel.com/content/www/us/en/support /network-and-io/wirelessnetworking/000007443.html
2. Click on “User Guide.” 3. Scroll to your adapter. To view additional regulatory information for your adapter, perform these steps: 1. Open this web site: http://www.intel.com/content/www/us/en/support/network-and-i-
o/wirelessnetworking/000007443.html 2. Click on the link for your adapter. 3. Click on Regulatory Marking Document for your adapter. Waste Electrical and Electronic Equipment Directive (WEEE)
Restriction of Hazardous Substances Directive (RoHS) Compliant All products described herein are compliant with the European Union’s RoHS Directive. For CE Mark-Related Questions related to the wireless adapter, contact: Intel Corporation Attn: Corporate Quality 2200 Mission College Blvd. Santa Clara, CA 95054-1549 USA

Japan
ADEO-001-01

5GHz

Korea . 5150-5250MHz .

Mexico La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

Morocco The operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities: Agadir, Assa-Zag, Cabo Negro, Chaouen, Goulmima, Oujda, Tan Tan, Taourirt, Taroudant and Taza.
The operation of this product in the radio channels 4, 5, 6 et 7 (2425 – 2442 MHz) is not authorized in the following cities: Aéroport Mohamed V, Agadir, Aguelmous, Anza, Benslimane, Béni Hafida, Cabo Negro, Casablanca, Fès, Lakbab, Marrakech, Merchich, Mohammédia, Rabat, Salé, Tanger, Tan Tan, Taounate, Tit Mellil, Zag.

Pakistan “PTA APPROVED MODEL”

Taiwan . . , 5.25-5.35

Singapore
ADEO-001-01

Radio Approvals
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer’s OEM Regulatory Guidance document.

Modular Regulatory Certification Country Markings
A list of countries requiring regulatory markings is available. Note that the lists include only countries requiring marking but not all certified countries. To find the regulatory country marking information for your adapter, perform these steps:
1. Open this web site: http://www.intel.com/content/www/us/en/support /network-and-io/wirelessnetworking/000007443.html
2. Click on the link for your adapter. 3. Click on Regulatory Marking Document for your adapter.

Regulatory ID

Intel® Wi-Fi 6E AX210 (Model AX210D2W)
Due to the very small size of the AX210D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable.
FCC ID: 2AGVY-100MWBXX01 IC: 21074-100MWBXX01

INFORMATION FOR OEMS and HOST INTEGRATORS
The guidelines described within this document are provided by Intel® to OEM integrators installing Intel® wireless adapters in notebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions of compliance with FCC rules, including RF exposure. When all antenna type and placement guidelines described herein are fulfilled the Intel® wireless adapters may be incorporated into notebook and tablet PC host platforms with no further restrictions. If any of the guidelines described herein are not satisfied it may be necessary for the OEM or integrator to perform additional testing and/or obtain additional approval. The OEM or integrator is responsible to determine the required host regulatory testing and/or obtaining the required host approvals for compliance.
ADEO-001-01

· Intel® wireless adapters are intended for OEMs and host integrators only. · The Intel® wireless adapter FCC Grant of Authorization describes any limited conditions
of modular approval. · The Intel® wireless adapters must be operated with an access point that has been approved
for the country of operation. · Changes or modification to Intel® wireless adapters by OEMs, integrators or other third
parties is not permitted. Any changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties will void authorization to operate the adapter.

Antenna Type and Gains
Only antennas of the same type and with equal or less gains as 3dBi for the 2.4GHz band and 5dBi for the 5GHz band shall be used with the Intel® wireless adapters. Other types of antennas and/or higher gain antennas may require additional authorization for operation. For testing purposes the following dual band antenna that approximates closely the above limits was used:

Antenna Antenna Location 2.4GHz Peak 5.2GHz Peak 5.5GHz Peak 5.7GHz Peak

Type

(Main/Aux)

Gain in dBi Gain in dBi Gain in dBi Gain in dBi

PIFA

Main Aux MIMO

3.24

3.73

4.77

4.77

*All antenna gains include cable loss. ____

Antenna Placement Within the Host Platform

To ensure RF exposure compliance the antenna(s) used with the Intel® wireless adapters must be installed in notebook or tablet PC host platforms to provide a minimum separation distance from all persons, in all operating modes and orientations of the host platform, with strict adherence to the table below. The antenna separation distance applies to both horizontal and vertical orientation of the antenna when installed in the host system.

Wireless Adapter

Minimum required antenna-to-user separation distance

Intel® Wi-Fi 6E AX210

TBD

Simultaneous Transmission of Intel® Wireless Adapters with Other Integrated or Plug-In Transmitters

Based upon FCC Knowledge Database publication number 616217, when there are multiple transmitting devices installed in a host device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test requirements. OEM integrators must

ADEO-001-01

identify all possible combinations of simultaneous transmission configurations for all transmitters and antennas installed in the host system. This includes transmitters installed in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC KDB 616217 document for all details in making this assessment to determine if any additional requirements for testing or FCC approval is necessary.

Information To Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating the Intel® wireless adapter, in compliance with local regulations. Host system must be labeled with “Contains FCC ID: XXXXXXXX”, FCC ID displayed on label.
The Intel® wireless adapter must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Intel Corporation is not responsible for any radio or television interference caused by unauthorized modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.
China:

Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad Radio Usage
The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad products.
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from permissible settings and restrictions in the country of use could be an infringement of national law and may be punished as such.

Statements of European Compliance
ADEO-001-01

The adapter listed below complies with the essential requirements of the European Union directive 2014/53/EU.
· Intel® Wi-Fi 6E AX210
ADEO-001-01

Specifications This section provides specification information for the Intel® Wi-Fi 6E AX210 wireless adapter. The following list may not be all inclusive.
· Intel® Wi-Fi 6E AX210 Intel® Wi-Fi 6E AX210 (Models AX210NGW/AX210D2W)

General Dimensions (H x W x D)
Weight
Radio ON/OFF Control
Connector Interface Operating Temperature Humidity Operating Systems
Wi-Fi Alliance Certification

· M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom side)] · M.2 1216: 12 mm x 16 mm x 1.65 (±0.08) mm · M.2 2230: 2.33 (±0.3) g · M.2 1216: 0.61 (±0.1) g Supported
M.2: PCIe, USB
0 to +80 degrees Celsius
50% to 90% RH non-condensing (at temperatures of 25 °C to 35 °C) Microsoft Windows 10, Linux
Wi-Fi CERTIFIED a/b/g/n/ac, WMM, WMM-PS, WPA2, WPA3, WPS, PMF, Wi-Fi Direct, Wi-Fi Agile Multiband and Wi-Fi TimeSync

ADEO-001-01

IEEE WLAN Standard

IEEE 802.11-2016 and select amendments (selected feature coverage)
IEEE 802.11a, b, g, n, ac, ax, d, e, h, i, k, r, u, v, w; Fine Timing Measurement based on 802.112016

802.11-2016, Wi-Fi Location R2 (802.11az) HW readiness

Bluetooth

Bluetooth* 5.2

Security

Authentication WPA2 and WPA3

Authentication 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP- SIM, EAP-

Protocols

AKA, EAP-AKA’)

Encryption 128-bit AES-CCMP, 256-bit AES-GCMP

Compliance

Regulatory
US Government

For a list of country approvals, please contact your local Intel representatives. FIPS 140-2

Product Safety UL, C-UL, CB (IEC 60950-1)

Model Numbers

Models

Model AX210NGW

Wi-Fi 6E (6GHz), 2×2, Bluetooth* 5.2, M.2 2230

Frequency Modulation
Frequency band

Model AX210D2W 6-7GHz (802.11ax R2)
FCC: 5.925GHz-7.125GHz EU: 5925GHz- 6.425GHz

Wi-Fi 6E (6GHz), 2×2, Bluetooth* 5.2, M.2 1216

5GHz (802.11a/n/ac/ax) 2.4GHz (802.11b/g/n/ax)

5.15GHz – 5.85GHz (dependent on country)

2.400 – 2.4835GHz (dependent on country)

Modulation

(dependent on country)
BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM

BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM

CCK, DQPSK, DBPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM

Wireless Medium

6-7GHz: Orthogonal Frequency Division Multiple Access (OFDMA)

5GHz UNII: Orthogonal Frequency Division Multiple Access (OFDMA)

2.4GHz ISM: Orthogonal Frequency Division Multiple Access (OFDMA)

Channels

All channels as defined by the relevant specification and country rules.

Data Rates
IEEE 802.11ax Data Rates
IEEE 802.11ac Data Rates

All data rates are theoretical maximums. Up to 2.4 Gbps Up to 867 Mbps

IEEE 802.11n Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130. 120, 117, 115.5, Data Rates 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2

ADEO-001-01

IEEE 802.11a Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps IEEE 802.11g Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps IEEE 802.11b Data Rates 11, 5.5, 2, 1 Mbps

Customer Support Support for this adapter is available online at https://aegex.freshdesk.com/support/login.

Warranty Information Warranty information for this adapter can be found at https://aegex.com/support/warranty.

ADEO-001-01

References

• Equipment Authorization | Federal Communications Commission

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>