Rollashade Tension Device Instruction Manual

: September 23, 2024
: Rollashade

Table of Contents

Tension Device
Product Specifications
Product Usage Instructions
Inside Mount & Tension Device Installation
Outside Mount & Tension Device Installation
- Frequently Asked Questions (FAQ)
Q: What tools are required for installation?
Q: How do I know if the tension device is securely

Tension Device

“`html

Product Specifications

Tension Device: Included
Hardware: Tension Device + Chain, Tension
Device Bracket, Short Screws, Screws
Tools Required: 3/8 Hex Head, Phillips Head,
1/8 Drill Bit, Drill
Application: Inside or Outside

Product Usage Instructions

Inside Mount & Tension Device Installation

Pull the chainhold down until the chain is fully tensioned
(plunger will be fully raised).
Screw the device into the wall.
Keep tension and secure the tension device.
NOTE: Please make sure the shade operates
smoothly.

Outside Mount & Tension Device Installation

With provided screws, install the bracket first with large
screws (use Chainhold marked screw hole locations as
reference).
Pull the chainhold down until the chain is fully tensioned
(plunger will be fully raised).
Install Chainhold into the bracket with small screws.
Pull chain down & mark location
Remove tension device & drill
Place tension device on bracket
Secure the tension device
NOTE: Please make sure the shade operates
smoothly.

Frequently Asked Questions (FAQ)

Q: What tools are required for installation?

A: The tools required for installation are 3/8 Hex Head,
Phillips Head, 1/8 Drill Bit, and a Drill.

Q: How do I know if the tension device is securely

installed?

A: Ensure that the plunger is fully raised and the chain is
fully tensioned. Test the shade to ensure it operates smoothly.

“`

TENSION DEVICE
INSTALL ATION INSTRUCTIONS
Rollashade.com info@rollashade.com 951.245.5077
© Copyright Roll-A-Shade® Inc. All Rights Reserved.

HARDWARE INCLUDED

Tension Device + Chain

Tension Device Bracket

Short Screws

Screws

INSIDE OR OUTSIDE APPLICATION

OUTSIDE INSIDE

TOOLS REQUIRED 3/8″ Hex Head Phillips Head 1/8″ Drill Bit
Drill

INSIDE

OUTSIDE

INSIDE MOUNT & TENSION DEVICE INSTALLATION Pull the Chainhold down until the chain is fully tensioned (plunger will be fully raised). Screw device into wall.

A

B

KEEP TENSION

C
SECURE TENSION DEVICE

NOTE: Please make sure shade operates smoothly.

OUTSIDE MOUNT & TENSION DEVICE INSTALLATION
With provided screws, install bracket first with large screws (use Chainhold marked screw hole locations as reference). Pull the Chainhold down until the chain is fully tensioned (plunger will be fully raised). Install Chainhold into bracket with small screws.

A

B

PULL CHAIN DOWN & MARK LOCATION
C

REMOVE TENSION DEVICE & DRILL
D

E
PLACE TENSION DEVICE ON BRACKET

F
SECURE TENSION DEVICE

NOTE: Please make sure shade operates smoothly.
RASTDV2VER.2 4 OF 4 | © Copyright Roll-A-Shade® Inc. All Rights Reserved.