AKC REUNITE WandScan 900 Pro Scanner Instructions
- September 23, 2024
- AKC REUNITE
Table of Contents
WandScan 900 Pro Scanner
“`html
Specifications:
- Model: WandScan 900 Pro Scanner
- Manufacturer: AKC Reunite
- Microchip Detection: Powerful capabilities
- Scanner Antennae: Round with two read areas
Product Usage Instructions:
Scanning Instructions:
-
Insert a 9-volt battery before use.
-
Scan the pet’s body, including the front legs down to the
elbows, neck, and chest. -
When a microchip is detected, the scanner will beep, and the
screen will display the pet’s microchip number. -
To reunite a found pet with its owner, visit
www.petmicrochiplookup.org or call AKC Reunite at
800-252-7894. -
The scanner will beep twice and turn off automatically after
approximately 30 seconds.
Note: For optimal performance, remove metal
collars before scanning to avoid interference from metal
objects.
Warning: Avoid hanging the scanner on a hook as
it may displace the antenna and affect scanning effectiveness. Lay
the scanner flat when storing to prevent damage.
Battery Replacement: If the scanner is working
slowly, replace the 9-volt battery for improved performance.
Maintenance: Do not write on, mark, or deface
the scanner to maintain the manufacturer’s warranty.
Frequently Asked Questions (FAQ):
Q: How do I know if the scanner is working properly?
A: The scanner will beep when it detects a
microchip, and the screen will display the pet’s microchip number.
If it’s not beeping or displaying information, consider replacing
the battery.
Q: Can I scan through metal objects?
A: It is recommended to remove metal collars
before scanning as metal objects such as computers, key FOBS,
tables, and fluorescent lighting can interfere with effective
scanning.
“`
INST-900 PRO 05/2024
SM
The w y home for lost pets.
WandScan 900 Pro Scanner
AKC Reunite WandScan 900-Pro has powerful microchip detection capabilities
that help keep the user at a safe distance from uncontrollable, dangerous or
unknown animals. Round scanner antennae have two read areas to help check for
a chip twice in one pass, making scanning easier and faster.
Scanning Instructions
1. Insert battery prior to use.
· Press the red button to turn the scanner on it will beep and the LCD
screen will light up when the sensors are activated. Extend pole with the loop
of the “scanning” wand pointed toward the pet. The scanner antennae are
located at the “3 o’clock” and “9 o’clock” sides of the scanner’s loop.
· Slowly scan the area between the shoulder blades in a zigzag motion. · If no
microchip is detected between the shoulder blades, scan a broader area,
including the front legs down to the elbows and the neck and chest. 2. When a
microchip is detected, the scanner will beep and the screen will display the
pet’s microchip number.
3. To help reunite a found pet with its owner, go to
www.petmicrochiplookup.org or call AKC Reunite at
800-252-7894.
The scanner will beep twice and automatically turn itself off in approximately
30 seconds.
For future reference: if the scanner is working slowly, replace the 9-volt
battery.
For best results, remove metal collars before scanning. Computers, some
automobile key FOBS, metal tables and even fluorescent lighting can interfere
with effective scanning.
WARNING: Products with exposed solder may contain lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Please wash hands after handling internal components and motherboards and avoid inhalation of fumes if heating the solder.
DO NOT HANG THIS SCANNER ON A HOOK!
Please lay this item flat when storing. If this scanner is hung by its cord,
the antenna will be displaced and significantly impact the effective scanning
of pets with microchips.
This scanner comes with a twelve-month manufacturer’s warranty. Please do NOT write on, mark on or otherwise damage or deface this scanner as this may void the warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>