SWIT PL-S300H Staright Down Flat Panel Light User Manual
- September 22, 2024
- SWIT
Table of Contents
SWIT PL-S300H Staright Down Flat Panel Light
USER MANUAL
SWIT Electronics Co.,Ltd.
Thank you for choosing our products, please read the instruction manual before using and keep it for future reference.
Cautions
- Do not disassemble the luminaire or touch the interior of the luminaire with metal objects as this may cause damage;
- Do not use outdoors in rain or snow or leave the luminaire in a wet environment;
- To ensure safety when using the luminaire, please use it with a safety rope;
- Use this product only in the temperature range of-l0’C to 40’C.
Appearance
Fig.3 PL-S300H back view
- DMXIN
- DMXOUT
- POWER
- USB
- COLOR TEMP knob
- DIMMER knob
- Back
- LCD
- MENU/ENTER
- I DC 48V input interface
- AC IN
- AC OUT
- adjusting handle
- U-shaped bracket
- U-bracket adapters
- barn door
- lenticular
Note: The lamp body features a ring mounting hole positioned at both the top and bottom bezels for convenient installation.
Control Panel And Usage
The operating modes include: CCT Mode, DMX Mode, EFF Mode, SYS Mode, the control panel knobs and keys function as follows:
- MENU/ENTER”Knob: Working mode switching and parameter setting by pressing or rotating;
- “Button : Back to previous menu
- “COLOR TEMP”Knob: Color temperature parameter adjustment
- “DIMMER”Knob: Brightness parameter adjustment
- CCT Mode
- DMX Mode
- EFF Mode
- SYS Setting
Under the [SYS] display, users can set system parameters and learn other relevant information such as firmware version number, product specification, hardware number, etc.
Firmware Upgrades
-
Program upgrade package access
Access: http://www.swit.cc -
Firmware upgrade steps
-
Prepare an empty USB stick with a FAT32 file system;
-
Place the firmware upgrade package in the root directory of the USB stick;
-
Turn on the power switch so that the PL-S300H is in working condition, insert the USB flash drive into Fig. 4 ® USB port;
-
Rotate, press the “MENU/ENTER” knob and press “SYS” ➔ “Firmware Update” ➔ “Yes” to upgrade the firmware:
S)Wait for a successful prompt and reboot the PL-S300H to check the firmware version and confirm that the upgrade is successful:
Rotate, press the “MENU/ENTER” knob, press “SYS” ➔ “Firmware Version” path to check the firmware version of the machine, if the version number is the same as the upgrade package version number, then the firmware upgrade is successful;
If the firmware upgrade fails, see [General Handling of Upgrade Failures] for details -
General handling of failed upgrades
If the firmware upgrade prompt fails, try the following two methods: -
Press the “MENU/ENTER” key to exit the current interface and repeat [firmware upgrade steps] step 4) until the upgrade is successful;
-
Replace the USB flash drive with one that meets the requirements and repeat steps 2) to 5) of the [Firmware Upgrade Procedure] until the upgrade is successful;
Attention
- Do not power off or unplug the USB drive during the upgrade process!
- The file system of the USB flash drive is FAT32!
- The firmware upgrade package is placed in the root directory of the USB drive!