Everglades EVCK6010 Mixed stove User Manual

Everglades EVCK6010 Mixed stove

Product Information

Specifications

• Outer width: 500 mm (50×60) / 600 mm (60×60)
• Outer depth: 630 mm
• Outer height: 855 mm
• Inner width: 360 mm (50×60) / 460 mm (60×60)
• Inner depth: 400 mm
• Inner height: 330 mm
• Inner Volume: 48 liters (50×60) / 61 liters (60×60)
• Lamp power: 15 W
• Bottom heating element: 1000 W (50×60) / 1200 W (60×60)
• Top heating element: 800 W (50×60) / 1000 W (60×60)
• Turbo heating element: 1800 W (50×60) / 2200 W (60×60)
• Grill heating element: 1500 W (50×60) / 2000 W (60×60)

Product Usage Instructions

Installation of Your Oven
Before installing your oven, ensure the following minimum distances are maintained:

• Min distance from top: 650 mm
• Min distance from sides: 570 mm
• Min distance from back: 20 mm
• Min distance from floor: 850 mm

Refer to the user manual for detailed installation instructions.

• Description of Oven & Control Panel
  Understand the different features and buttons on the oven control panel. Familiarize yourself with the settings and functions.

• Using Cooker Section
  Instructions on how to use the cooker section of the oven including adjusting heat settings and using different burners.

• Using Oven Section
  Guidance on how to operate the oven section, set temperature, and choose cooking modes like conventional or convection baking.

• Using Grill Deflector
  Information on utilizing the grill deflector for grilling purposes and adjusting grill settings.

• Maintenance and Cleaning
  Tips on cleaning and maintaining your oven to ensure longevity and efficient performance.

• Usage of Coffeepot Support
  Instructions on how to use the coffeepot support feature if available in your model.

FAQ

• Q: How do I adjust my oven for different gas types?
  A: To adjust for different gas types, follow the instructions in the user manual which involve changing nozzles and adjusting the reduced flame gas cock carefully with a small screwdriver.

• Q: Can this appliance be used for commercial purposes?
  A: No, this appliance is designed for domestic use only and should not be used for commercial purposes.

Dear User,
Our objective is to make this product provide you with the best output which is manufactured in our modern facilities in a careful working environment, in compliance with total quality concept. Therefore, we suggest you to read the user manual carefully before using the product and, keep it permanently at your disposal.

NOTE:
This user manual is prepared for more than one model. Some of the features specified in the Manual may not be available in your appliance.

All our appliances are only for domestic use, not for commercial use.

“THIS APPLIANCE SHALL BE INSTALLED PER THE REGULATIONS IN FORCE AND ONLY USED IN A WELL-VENTILATED SPACE. READ THE INSTRUCTIONS BEFORE INSTALLING OR USING THIS APPLIANCE”

IMPORTANT WARNINGS

Electrical Connection and Security:

1. Your oven requires 16 or 32 Ampere fuse according to the appliance’s power. If necessary, installation by a qualified electrician is recommended.
2. Your oven is adjusted in compliance with 230V~50-60Hz. (or 230V/400V~50-60Hz.) electric supply. If the mains are different from this specified value, contact your authorized service.
3. The electrical connection of the oven should only be made by the sockets with the earth system installed in compliance with the regulations. If there is no proper socket with earth system in the place where the oven will be placed, immediately contact a qualified electrician. The manufacturer shall never be responsible for the damages that will arise because of the sockets connected to the appliance with no earth system. If the ends of the electrical connection cable are open, according to the appliance type, make a proper switch installed in the mains by which all ends can be disconnected in case of connecting/disconnecting from/to the mains.
4. If your electric supply cable gets defective, it should definitely be replaced by the authorized service or qualified electricians to avoid the dangers.
5. The electrical cable should not touch the hot parts of the appliance.
6. Please operate your oven in a dry atmosphere.

Gas Connection and Security:
Please operate your oven in a dry atmosphere.

1. Fit the clamp to the hose. Push one of the hoses until it goes to the end of the pipe.
2. For the sealing control; ensure that the buttons in the control panel are closed, but the gas cylinder is open. Apply some soap bubbles to the connection. If there is gas leakage, there will be foaming in the soaped area.
3. The oven should be using a good ventilation place and should be installed on flat ground.
4. Re-inspect the gas connection.
5. When placing your oven to its location, ensure that it is at the counter level. Bring it to the counter level by adjusting the feet if necessary.
6. Do not make the gas hose and electrical cable of your oven go through the heated areas, especially through the rear side of the oven. Do not move gas connected oven. Since the forcing shall loosen the hose, gas leakage may occur.
7. Before using the appliance, to ensure safe use, be sure to fix the appliance to the wall using the chain and hooked screw supplied. Ensure that the hook is screwed into the wall securely.
8. Please use a flexible hose for the gas connection.

Before using the appliance, to ensure safe use, be sure to fix the appliance to the wall using the chain and hooked screw supplied. Ensure that the hook is screwed into the wall securely.|

INSTALLATION OF YOUR OVEN

TECHNICAL FEATURES OF YOUR OVEN

Supply Voltage| 220V-240V AC,50-60Hz (Or 230V400V AC,50-60

Hz)

---|---
Hot Plate 145 mm| 1000 W
Hot Plate 180 mm| 1500 W
Hot Plate rapid 145 mm| 1500 W
Hot Plate rapid 180 mm| 2000 W
BURNER INJECTOR VALUES ACCORDING TO THE GAS TYPE| LPG G30/28-30mbar| NG G20/20mbar| NG G25/25mbar
---|---|---|---

Wok Burner

| Injector Ø mm| 0,96| 1,30| 1,40
Power kW| 3,60| 3,35| 3,66
Consuption Gr/h,m³/h| 284| 0,3| 0,365

Rapid Burner

| Injector Ø mm| 0,85| 1,15| 1,20
Power kW| 3,00| 2,77| 3,00
Consuption Gr/h,m³/h| 286| 0,253| 0,326

Semi Rapid Burner

| Injector Ø mm| 0,65| 0,97| 0,95
Power kW| 1,78| 1,78| 1,61
Consuption Gr/h,m³/h| 140| 0,167| 0,174

Auxiliary Burner

| Injector Ø mm| 0,50| 0,72| 0,70
Power kW| 0,88| 0,99| 0,88
Consuption Gr/h,m³/h| 70| 0,092| 0,094

Oven Burner

| Injector Ø mm| 0,70| 0,97| 0,95
Power kW| 2,16/2,22| 1,83/2,00| 1,72/1,70
Consuption Gr/h,m³/h| 170/175| 0,178/0,179| 0,183/0,178

Grill Burner

| Injector Ø mm| 0,60/0,65| 0,95| 0,92/0,95
Power kW| 1,50/1,72| 1,78/1,85| 1,50/1,60
Consuption Gr/h,m³/h| 118/135| 0,162/0,169| 0,162/0,173

Nozzle change operation:

1. Please use the driver with a special head for removing and installing the nozzle as figure-1
2. Please remove the nozzle (Figure -2) from the burner with a special nozzle driver and install a new nozzle (Figure -3)

Reduced Flame Gas Cock Adjustment:
To adjust your oven to the gas type, adjust reduced flame carefully by turning with a small screwdriver as shown below on the screw in the middle of the gas cocks as well as nozzle changes.

| From LPG to NG| From NG to LPG
---|---|---
Rapid Burner| 3 Turns Counterclockwise| 3 Turns Clockwise
Semi-Rapid Burner| 2.5 Turns Counterclockwise| 2.5 Turns Clockwise
Auxiliary Burner| 2 Turns Counterclockwise| 2 Turns Clockwise
WOK Burner| 4 Turns Counterclockwise| 4 Turns Clockwise
Oven Burner| 4,5 Turns Counterclockwise| 4,5 Turns Clockwise
Grill Burner| 4 Turns Counterclockwise| 4 Turns Clockwise

For oven burners:

1. Please remove the nut from on nozzle body with the nut driver and disconnect the gas pipe from the body as Figure 7.
2. Please remove the nozzle body and burner from the cavity as in Figure -8/9 and remove the nozzle from the injector body (Figure-10/11) and change. Then re-install the nozzle body and burner on the cavity by screws.

If your oven has another type of oven burner, oven burner nozzle replacement will be:

IMPORTANT WARNINGS:

1. Pay attention to minimum health and safety requirements.
2. The cooker is supplied setup according to the conditions shown on the rating label which is stuck to the rear of the appliance. From this sticker, you can learn for which gas type (LPG or NG) this appliance is configured when supplied.
3. Keep the electrical cable of your oven away from the hot areas.
4. If the supply cord is damaged, it must be replaced by the manufacturer its services agent, or similar qualified persons to avoid hazard.
5. Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
6. In case of power failure, readjust your timer. Otherwise, the oven will not operate (Digital Timer).
7. Your oven can have different output pressures according to your country’s gas and pressure specifications. Be sure that the cooker is configured correctly for local requirements (for example, the jets must be suitable for local gas type and gas pressure).
8. Connect your oven to LPG in the shortest way and without any leakage. Min. 40 cm Max. 125 cm.
9. When making a gas leakage check, never use any flame type like those of lighters, matches, cigarette fires, or similar ones.
10. The usage of your appliance creates moisture and heat in the room it is placed, make sure that your kitchen is ventilated well. Maintain the natural ventilation ducts properly.
11. CAUTION! Do not touch hot parts with bare hands and keep children well-supervised
12. When the oven is hot never touch the oven glass by hand.
13. Before starting to use your appliance, keep curtains, tulle, paper, or inflammable things away from your appliance. Do not keep combustible or inflammable things in or on the appliance.
14. This appliance is for cooking purposes only. It must not be used for other purposes, for example, room heating. All our appliances are only for domestic use, not for commercial use.
15. For disconnection from the supply mains having a contact separation in all poles that provide full disconnection, must be incorporated in fixed wiring under the wiring rules.
16. Some models are supplied without a plug-an-lead set. In this case please use a flexible cable suitable for connection to mono phase: H05 VV-F 3 G 4 mm2 or for 3 phase: H05 VV-F 5 G 1.5 mm2
17. This appliance is produced per the safety regulations. Incorrect use will harm people and appliances.
18. Children should be supervised to ensure that they do not play with the appliance. Never let them play with the appliance.
19. Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.NEVER try to extinguish a fire with water, but switch off the appliance and then cover the flame e.g. with a lid or a fire blanket.
20. Danger of fire: do not store items on the cooking surfaces
21. This appliance is not intended for use by persons (including children) with reduced physical, sensory, and mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
22. “Caution: Accessible parts may be hot when the grill is in use. Young children should be kept away”

WARNING
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

IF THE APPLIANCE DOES NOT OPERATE

1. Please check whether the plug of the power supply cord has a good connection with the wall socket or not.
2. Please check the electric network.
3. Please check the fuse.
4. Please check the power supply cord for any damage problems.
5. If you can not solve the problem, get in contact with a manufacturer-supplier service agent or similar qualified persons.

DESCRIPTION OF OVEN and CONTROL PANELS

• THERMOSTAT KNOB; To operate the oven, the thermostat must be adjusted to the desired temperature. Your thermostat has a feature of adjustment to 50 – 280 degrees.
• MECHANIC TIMER KNOB (Optional); To operate the oven, the timer switch should be adjusted to desired time from 0-90 minutes. You can use a cooking timetable.

DESCRIPTION OF THE OVEN and CONTROL PANELS

1. Rapid burner
2. Semi-rapid burner
3. Auxiliary burner
4. Command panel
5. Oven handle
6. Top plate
7. Top lid (glass or metal)
8. Oven door
9. Dish warmer Drawer

USING COOKER SECTION

Using Gas Burners:

1. To obtain maximum output, be careful that the saucepan that will be used should be flat bottomed, and use the saucepans with dimensions given herein above.

2. The valves controlling the gas cookers have special security mechanisms. To light the cooker;
   Always press the switch forward and bring it to the flame symbol by turning counterclockwise. All of the lighters shall operate and the cooker you control shall light only. Keep the switch pressed until ignition is performed. Press on the lighter button and turn the knob counterclockwise.

3. Do not continuously operate the igniter for more than 15 seconds. If the burner does not ignite, wait a minimum of one minute before trying again. If the burner is extinguished for any reason, close the gas control valve and wait a minimum of one minute before trying again.

4. In models with a Gas Security System, when the flame of the cooker is extinguished, the control valve cuts off the gas automatically. To operate the burners with a gas security system you must press the knob and turn counter-clockwise. After the ignition, you must wait nearly 5-10 seconds for gas security systems activation. If the burner is extinguished for any reason, close the gas control valve and wait a minimum of one minute before trying again.

Using Hot Plates:

1. Electric hotplates have a standard of 6 temperature levels (as described herein above)
2. When using first time, operate your electric hotplate in position 6 for 5 minutes. This will make the agent on your hotplate which is sensitive to heat hardened by burning.
3. Use flat-bottomed saucepans which are fully in contact with the heat as much as you can, so that you can use the energy more productively.

Before operating your hob please make sure that the burner caps are well positioned. The right placement of the burner caps is shown below.

USING OVEN SECTION

Using oven burners:

1. If your oven is equipped with burners that operate with gas, an appropriate knob should be used to ignite the burners. Some models have automatic ignition from the knob; it is easy to ignite the burner by turning the knob. Also, burners can be ignited by pressing the ignition button or they can be ignited with a match.
2. Do not continuously operate the igniter for more than 15 seconds. If the burner does not ignite, wait a minimum of one minute before trying again. If the burner is extinguished for any reason, close the gas control valve and wait a minimum of one minute before trying again.

Using oven heating elements:

1. When your oven is operated the first time, an odor will be spread out which will be sourced from using the heating elements. To get rid of this, operate it at 250 °C for 45-60 minutes while it is empty.
2. The oven control knob should be positioned to desired value; otherwise, the oven does not operate.
3. Kinds of meals, cooking times, and thermostat positions are given on the cooking table. The values given in the cooking table are characteristic and were obtained as a result of the tests performed in our laboratory. You can find different flavors suitable for your taste depending on your cooking and user habits.
4. You can make chicken revolving in your oven using the accessories.
5. Cooking times: The results may change according to the area voltage and material having different quality, amount, and temperatures.
6. When cooking is being performed in the oven, the lid of the oven should not be opened frequently. Otherwise, the circulation of the heat may be imbalanced and the results may change.
7. Using cake forms while cooking cake gives better results.
8. 5 – 10 min. preliminary heating should be done prior cooking.

Cooking Time Table:

MAINTENANCE and CLEANING

1. Disconnect the plug supplying electricity to the oven from the socket.
2. While oven is operating or shortly after it starts operating, it is extremely hot. You must avoid touching heating elements.
3. Never clean the interior part, panel, lid, trays, and all other parts of the oven with the tools like a hard brush, cleaning mesh, or knife. Do not use abrasive, scratching agents and detergents.
4. After cleaning the interior parts of the oven with a soapy cloth, rinse it and then dry thoroughly with a soft cloth.
5. Clean the glass surfaces with special glass cleaning agents.
6. Do not clean your oven with steam cleaners.
7. Before opening the upper lid of the oven, clean the spilled liquid off the lid. Also, before closing the lid, ensure that the cooker table is cooled enough.
8. Never use inflammable agents like acid, thinner, and gasoline when cleaning your oven.
9. Do not wash any part of your oven in the dishwasher.
10. To clean the front glass lid of the oven; remove the fixing screws fix the handle using a screwdriver and remove the oven door. Then clean and rinse it thoroughly. After drying, place the oven glass properly and re-install the handle.

CLEANING AND MAINTENANCE OF THE OVEN’S FRONT DOOR GLASS
Remove the profile by pressing the plastic latches on both left and right sides as shown in Figure 1 and pulling the profile towards yourself as shown in Figure 2. Then remove the inner glass as shown in Figure 3. If required, the middle glass can be removed in the same way. After cleaning and maintenance are done, remount the glasses and the profile in reverse order. Make sure the profile is properly seated in its place.

USAGE OF COFFEEPOT SUPPORT

Coffeepot support is to use small-diameter pots with your cooker. Place the support part on the grid center and then put the pot on it to start using.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>