Everglades EVTT1021 Table Top Refrigerator with Freezer User Manual

Everglades EVTT1021 Table Top Refrigerator with Freezer

Safety and warning information

For your safety and correct usage, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to make sure that all people using the appliance are thoroughly familiar with its
operation and safety features. Save these instructions and be sure that they remain with the appliance if it is moved or sold, so that anyone using it throughout its life, will be properly informed on its usage and safety notices.
For the safety of life and property, keep the precautions of these user’s instructions as the manufacturer is not responsible for damages caused by omission.

Safety for children and others who are vulnerable people

• According to EN standard
  This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  According to IEC standard
  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Keep all packaging away from children as there is risk of suffocation.

• If you are discarding the appliance, pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent children playing from suffering an electric shock or from closing themselves inside it.

• If this appliance, featuring magnetic door seals, is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make the spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.

General safety

WARNING —This appliance is intended to be used in household and similar applications such as

• staff kitchen areas in shops, offices and other working environments;
• farmhouses and by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments;
• catering and similar non-retail applications.

WARNING — Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
WARNING — If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING — Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING — Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING — Do not damage the refrigerant circuit.
WARNING — Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
WARNING — The refrigerant and insulation blowing gas are flammable. When disposing of the appliance, do so only at an authorized waste disposal centre. Do not expose to flame.
WARNING —When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING —Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.

Replacing the illuminating lamps

WARNING— The illuminating lamps must not be replaced by the user! If the illuminating lamps is damaged, contact the customer helpline for assistance.
This warning is only for refrigerators that contain illuminating lamps.

Refrigerant

The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged.
The refrigerant (R600a) is flammable.

• WARNING — Refrigerators contain refrigerant and gases in the insulation. Refrigerants and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of the refrigerant circuit is not damage prior to proper disposal.

WARNING : Risk of fire / flammable materials

If the refrigerant circuit should be damaged:

• Avoid opening flames and sources of ignition.
• Thoroughly ventilate the room in which the appliance is situated.
  It is dangerous to alter the specifications or modify this product in any way.
  Any damage to the cord may cause a short circuit, fire, and/or electric shock.

Electrical safety

1. The power cord must not be lengthened.
2. Make sure that the power plug is not crushed or damaged. A crushed or damaged power plug may overheat and cause a fire.
3. Make sure that you can access the main plug of the appliance.
4. Do not pull the main cable.
5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
6. You must not operate the appliance without the interior lighting lamp cover.
7. The fridge is only applied with power supply of single phase alternating current of 220~240V/50Hz. If fluctuation of voltage in the district of user is so large that the voltage exceeds the above scope, for safety sake, be sure to apply A.C. Automatic voltage regulator of more than 350W to the fridge. The fridge must employ a special power socket instead of common one with other electric appliances. Its plug must match the socket with ground wire.

Daily use

• Do not store flammable gass or liquids in the appliance, There is a risk of an explosion.
• Do not operate any electrical appliances in the appliance (e.g.electric ice cream makers,mixers etc.).
• When unplugging always pull the plug from the mains socket,do not pull on the cable.
• Do not place hot items near the plastic components of this appliance.
• Do not place food products directly against the air outlet on the rear wall.
• Store pre-packed frozen food in accordance with the frozen food manufacturer’s instructions.
• The appliances manufacture’s storage recommendations should be strictly adhered to.Refer to relrelevant instructions for storage.
• Do not place carbonated or fizzy drinks in the freeze compartment as it creates pressure on the container,which may cause it to explode,resulting in damage to the appliance. Frozen food can cause frost burns if consumed straight from the freezer compartment.
• Do not place the appliance in direct sunlight.
• Keep buring candles,lamps and other items with naked flames away from the appliance so that do not set the appliance on fire.
• The appliance is intended for keeping food stuff and/or beverages in normal household as explained in this instruction booklet The appliance is heavy.Care should be taken when moving it.
• Do not remove nor touch items from the freezer compartment if your hands are damp/wet,as this could cause skin abrasions or frost/freezer burns.
• Never use the base,drawers, doors etc. to stand on or as supports.
• Frozen food must not be refrozen once it has been thawed out.
• Do not consume ice popsicles or ice cubes straight from the freezer as this can cause freezer burn to the mouth and lips. To avoid items falling and causing injury or damage to the appliance, do not overload the door racks or put too much food in the crisper drawers.
• This refrigerating appliance is not intended to be used as a built-in appliance.
• This refrigerating appliance is not suitable for freezing foodstuffs.

Care and cleaning

• Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
• Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic solvents or abrasive cleansers.
• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.

Installation Important!

• For electrical connection carefully, follow the instructions given in this manual.

• Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In this case retain packing.

• It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation, follow the instructions relevant to installation. Wherever possible the back of the product should not be too close to a wall to avoid touching or catching warm parts
  (compressor, condenser) to prevent the risk of a fire, follow the instructions relevant to installation.

• The appliance must not be locate close to radiators or cookers.

• Make sure that the mains plug is accessible after the installation of the appliance.

Service

• Any electrical work required to do the servicing of the appliance should be carried out by qualified electrician or competent person.
• This product must be serviced by an authorized Service Center, and only genuine spare parts must be used.
  1. If the appliance is Frost Free.
  2. If the appliance contains freezer compartment.
     Note: Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.(This clause applies only to the EU region.)

First use and Installation

Cleaning before use

Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water andsome neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.
Important! It is necessary to have good ventilation around the refrigerator to allow for the dissipation of heat, high efficiency, and low power consumption.For this reason, sufficiently cleared space should be available around the refrigerator. It is advisable for there to be 50-7Omm separating the back of the refrigerator to the wall at least 100mm of space on its two sides, a height of over 100mm from its top and a clear space in front to allow the doors to open 180°.

Appliances must not be exposed to rain.
Sufficient air must be allowed to circulate in the low rear section of the appliance, as poor air circulation can affect performance.
Built-in appliancees should be positioned away from heat sources such as heaters and direct sunlight.

Installation Positioning

Warning! Before installing, read the instruction carefully for your safety and correct operation of the appliance.

• Position the appliance away from sources of heat such as stoves, radiators, direct sunlight etc.

• Maximum performance and safety are guaranteed by maintaining the correct indoor temperature for the class of unit concerned, as specified on the rating plate.

• Sufficient air must be allowed to circulat in the lower rear section of appliances, as poor air circulation can affect performance.

• This appliance performs well from N to ST. The appliance may not work properly if it is left for a longer period at a temperature above or below the indicated range.

• Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear section of the appliance, as poor air circulation can affect performance. Built-in appliances should be positioned away from heat sources such as heaters and direct sunlight. Installing the rubber supporting pad If there is a rubber supporting pad and a screw provided in a plastic bag with your appliance .you can install these accessories according to the following procedure.
  Note:
  There is no need to install these accessories under normal usage. Only under the extreme circumstances, cabinet empty while load on door with total mass of 10 kg and opening the door about 90 degree ,this refrigerator may take risk of tipping. Then rubber supporting pad should be fastened to the lower base cover to steady this appliance.

  1. Tilt appliance to find screw hole on the
     left of lower base cover.

  2. Put screw into the hole of rubber
     Supporting pad.

  3. Make screw in alignment with the hole on lower base cover. Fasten rubber supporting pad to the base cover firmly by a cross screw driver (self-provided). on

Leveling

• The appliance should be level in order to eliminate vibration. To make the appliance level, it should be upright and both adjusters should be firmly contacted with the floor. You can also adjust the level by screwing out the appropriate level adjusterat the front (use your fingers or a suitable spanner).

Electrical connection
Caution! Any electrical work required to install this appliance by a qualified or competent person.
Warning! This appliance must be earthed.
The manufacture declines any liability should these safety measures not be observe.

Description of the appliance

1. Cabinet
2. Small fridge compartment door
3. Ice Cube Tray (optional)
4. Defrosting tray
5. Removable shelf
6. Crisper box cover part
7. Crisper drawer (optional)
8. Lower rack
9. Egg tray (optional)
10. Bottle holder
11. Small rack
12. Refrigerator door
13. Temperature regulator

Note: Due to continual modification of ur products, your refrigerator may be slightly different
from this instruction Manual, but its functions and usage methods remain the same.
Note: To get the best energy efficiency of this product, please place all shelves, drawers on their
original position as the illustration above

Operation

Starting up and temperature regulation Insert the plug of the connection lead into the plug socket with protective earth contact. The temperature selector knob is located on the side of the freezer compartment.

Setting “0 ” means
Turning the temperature control to “0” position stops the cooling does not shut off the power to the refrigerator.
Turning clockwise in direction Refrigerating unit on, the latter then operating automatically. If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the refrigerator will not start. cycle, but
Setting “8”(end-stop) means:
Lowest temperature, coldest setting.

Important!
For optimum food preservation, we advise you select setting of 3 or 4, if you want the temperature lower or higher, please turn the knob to colder or warmer setting accordingly. When you turn the knob to lower temperature, it can consume more energy while to the higher, it can be more energy-saving and therefore increase the energy efficiency.
Important!
High ambient temperatures (e.g. on hot summer days) and a colder setting (position 6 to 8) on the temperature regulator can cause the compressor to run continuously or even non-stop!
Reason: when the ambient temperature is high, the Compressor must run continuously to maintain the low temperature in the appliance.
Note: High-temperature setting wll accelerate
food waste.

Remove and install the door shelf
Warning:The door shelf must not removed and installed by the user! If the door shelf is damaged ,contact the customer helpline for assistance .To replace the door shelf, the below steps can be followed:

Press the right side of the door shelf inwardly ,while holding the left side . When the notch of the shelf has been detachesd from the refrigerator door ,remove the rack obliquely upwardly.

Firstly tilt the left side of the door shelf ,and make sure the notch has been fastened to the door.Then press the right side inwardly,push it down to the right place

Using your appliance
Your appliance has the accessories as the “Description of the appliance” showed in general, with this instruction you can have the right way to use them.

Door shelf

• lt is suitable for the storage of egg, canned liquid, bottled drinks and packed food, etc. Do not place too many heavy things in the shelf.

Shelf in Refrigerator chamber

• There are shelves in refrigerator chamber, and they can be taken out to be cleaned.

Ice making compartment

• This is a low-temperature compartment intended specifically for the freezing and storage of ice. It could make 250g ice within 24hours.

Helpful hints and tips

Energy-saving tips
We recommend that you follow the tips below to save energy.

• Try to avoid keeping the door open for long periods in order to conserve energy.
• Ensure the appliance is away from any sources of heat (Direct sunlight, electric Oven or cooker etc)
• Don’t set the temperature colder than necessary.
• Don’t store warm food or evaporating liquid in the appliance.
• Place the appliance in a well-ventilated, humidity-free, room. Please refer to Installing your new appliance chapter.
• If the diagram shows the correct combination for the drawers, crisper and shelves, do not adjust the combination as this is designed to be the most energy-efficient configuration

Hints for fresh food refrigeration

• Do not place hot food directly into the refrigerator or freezer, the internal temperature will increase resulting in the compressor having to work harder and will consume more energy.

• Do cover or wrap the food, particularly if
  it has a strong flavor.

• Place food properly so that air can
  circulate freely around it.

Hints for refrigeration

• Meat (All Types) Wrap in polythene food: wrap and place on the glass shelf above the vegetable drawer. Always follow food storage times and use by dates suggested by manufacturers. Cooked food, cold dishes, etc.: They should be covered and may be placed on any shelf.

• Fruit and vegetables:
  They should be stored in the crisper box

• Butter and cheese:
  Should be placed aluminum foil or polyethylene(plastic) bags while removing as much air as possible.

• Milk bottles:
  Should have a lid and be stored in the door shelf.

Hints for freezing

• When first starting-up or after a period out of use, let the appliance run at least 2 hours on the higher settings before putting food in the compartment.
• Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required.
• Wrap up the food in aluminum foil or polyethylene food wraps which are airtight,
• Do not allow fresh, unfrozen food to touch the food which is already frozen to avoid temperature rise of the latter.olced products, if consumed immediately after removal from the freezer compartment, will probably cause frost burns to the skin.
• It is recommended to label and date each frozen package in order to keep track of the storage time.

Hints for the storage of frozen food

• Ensure that frozen food has been stored correctly by the food retailer
• Once defrosted, food will deteriorate rapidly and should not be re-frozen. Do notexceed the storage period indicated by the
  food manufacturer.

Switching off your appliance
If the appliance needs to be switched off for an extended period, the following steps should be taken prevent mould on the appliance.

1. Remove all food.
2. Remove the power plug from the mains socket.
3. Clean and dry the interior thoroughly.
4. Ensure that all the doors are wedged open slightly to allow air to circulate.

Cleaning and Care

For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly.
The fridge should be cleaned and maintained at least every two months.
Warning! Danger of electrical shock!
The appliance should not be connected to the mains during cleaning. Before cleaning switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse.
Important!

• Remove the food from the appliance before cleaning. Store them in a cool place, well covered.

• Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components,

• Hot vapors can lead to the damage of plastic parts.

• Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice from orange peel, butyric acid, cleanser that contain acetic acid.Do not allow such substances to come into contact with appliance parts.

• Do not use any abrasive cleansers.

• Clean the appliance and the interior accessories with a cloth and lukewarm water. Commercially available dish washing detergents may also be used. After

• cleaning wipe with fresh water and clean dish cloth.

• Accumulation of dust at the condenserincreases energy consumption, clean the
  condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner.

• Clear a blocked drain hole with the aid of something like soft green peg, be careful not to make any damage to the cabinet by sharp things.

• After everything is dry place appliance back into service.

Defrosting

Why defrosting
Water contained in food or air getting into inside while the fridge be opening doors may form a frost layer inside. It will weaken the refrigeration when the frost is thick. While it is more than 10mm thick, you should defrost.

Defrosting in fresh food storage
compartment

• It is automatically controlled by switching the temperature regulator on or off so that there is no need of operation of defrosting.
• Water from defrosting will be drained to the defrosting tray automatically. Then you need to put away the water of the defrosting tray and clean the refrigerator inside after defrosting.
• Warning! You need to raise the defrosting tray before you remove it.
• Warning! Switching off the appliance before defrosting, turn the temperature regulator to position “0”.
• Important! The fridge should be defrosted at least every one month. During the using process, if the door was opened frequently or using the appliance in the extreme humidity, we advise the user to defrost every two weeks.

Reversing the door

The side at which the door opens can be
changed from the right side (as supplied)
to the left side, if the installation site
requires.
Tools you will need:

1. 8mm socket driver.
2. Cross-shaped screwdriver.
3. Putty knife or thin-blade screwdriver.

Before you start lay the refrigerator on it’s
back in order to gain access to the base, you
should rest it on soft foam packaging or
similar material to avoid damaging the cooling
pipes at the rear of the refrigerator.

1. Remove the upper hinge core, transfer it to
   left side and tighten securely, then put it in a
   safe place.

2. Remove both adjustable feethinge bracket and the rubber supporting pa by unscrewing the bolts, then fit them on by the following pictures.

3. Replace the lid by fitting the upper hinge core into the upper door’s hole, securing it with the 2 screws. Replace the screw cOvers.
   Warning!
   When changing the side at which the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand.

Troubleshooting

If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below. You can carry out some easy checks according to this section before calling for service.
Warning! Don’t try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service engineer or the shop where you purchased the product.

| |
---|---|---

Appliance does not work.

| Appliance is not switched on.| Switch on the appliance.
Mains plug is not plugged in or is loose.| Insert mains plug.
Fuse has blown or is defective.| Check fuse, replace if necessary.
Socket is defective.| Mains malfunctions are to be

corrected by an electrician.

Appliance cools too much.

The food is too warm.

| Temperature is not properly

aieljni,illrEllu re is set too cold.

| f /Nil1  Jqg\n  eVMl ‘ i Qpi   @6D\!13cE!r  B” aWMFffier setting temporarily.
Door was open for an

extended period.

| Open the door only as long as

necessary.

A large quantity of warm food was placed in the appliance within the last 24 hours.|

Turn the temperature regulation to a colder setting temporarily.

The appliance is near a heat source.| Please look in the “installation location” section.

Heavy build-up of frost, possibly also on the door seal.

|

Door seal is not air-tight (possibly after reversing the door).

| Carefully warm the leaking sections of the door seal with a hair dryer(on a cool setting). At the same time shape the warmed door seal by hand such that it sits correctly.

Unusual noises.

| Appliance is not level.| Readjust the feet.
The appliance is touching the wall or other objects.|

Move the appliance slightly.

A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall.|

If necessary, carefully bend the component out of the way.

The compressor does not start immediately after changing the temperature setting.

|

This is normal, no error has occurred.

|

The compressor starts after a period of time.

Water on the fioor or storage shelves.|

Water drain hole is blocked.

| See the “cleaning and care” section.

Disposal of the appliance

It is prohibited to dispose of this appliance as household waste.
Packaging materials
Packaging materials with the recycle symbol are recyclable. Dispose of the
packaging into a suitable waste collection container to recycle it.
Before disposal of the appliance

1. Pull out the mains plug from the mains socket.
2. Cut off the power cord and discard with the mains plug.
   Warning! Refrigerators contain refrigerant and gases in the insulation.
   Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of the refrigerant circuit is not damage prior to proper disposal.

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to th environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

To avoid contamination of food, please respect the following instructions

• Opening the door for long periods can cause a significant increase of the temperature
  in the compartments of the appliance.

• Clean regularly surfaces that can come in contact with food and accessible drainage
  systems.

• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in
  contact with or drip onto other food.

• Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or
  aking icecream and making ice cubes.

• One-, two- and three-star compartments are not suitable for the freezing of fresh food.

1

|

Fridge

| +2 ~ +8| Eggs, cooked food, packaged food, fruits and vegetables, dairy products, cakes, Drinks and other foods which are not suitable for freezing.

2

|

(**)-Freezer

|

≤-18

| Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended time is 3 months – nutrition values and taste decrease with time), suitable for frozen fresh food.

3

|

***-Freezer

|

≤-18

| Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended time is 3 months – nutrition values and taste decrease with time). Not suitable for freeing fresh food.

4

|

**-Freezer

|

≤-12

| Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended time is 2 months – nutrition values and taste decrease with time). Not suitable for freeing fresh food.

5

|

*-Freezer

|

≤-6

| Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended time is 1 month – nutrition values and taste decrease with time). Not

suitable for freeing fresh food.

6

|

0-star

|

-6 ~ 0

| Fresh pork, beef, fish, chicken, some packaged processed foods, etc. (Recommended to eat within the same day, preferably not later than

3 days) .

Partially packed/wrapped up encapsulated processed foods (non-freezable foods)

7

|

Chill

|

-2 ~+3

| Fresh/frozen pork, beef, chicken, freshwater aquatic products, etc.(7 days below 0 ℃ and above 0 ℃ is recommended for consumption within that day, preferably no more than 2 days). Seafood (less than 0 for 15 days, it is not recommended to store above 0 ℃)

8

|

Fresh Food

|

0 ~+4

| Fresh pork, beef, fish, chicken, cooked food, etc. (Recommended to eat within the same day, preferably no more than 3 days)
---|---|---|---
9| Wine| +5 ~+20| red wine,white wine,sparkling wine etc.

Note: please store different foods according to the compartments or target storage temperature of your purchased products.
– If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.
Water dispenser cleaning (special for water dispenser products):
– Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days.
WARNING! Food needs to be packed in bags before putting into the refrigerator, and liquids need to be packed in bottles or capped containers to avoid the problem that the product design structure is not easy to clean.

Warranty Conditions

1. The products of Everglades come with a 24-month full factory guarantee from the moment of purchase. This guarantee cannot be transferred under any circumstances.
2. A guarantee is not offered on easy-to-break components like glass, plastic, rubbers, light bulbs, etc. A guarantee is also not offered if the device has been in contact with chemical and/or electro chemical or other unsuitable substances. It is also not possible to offer a guarantee if shortcomings in the device can be attributed to transport damage that is no fault of our own, improper installation and assembly, incorrect use, inappropriate use, sub-standard maintenance, failure to comply with operating and assembly instructions or normal wear and tear. Claims under the guarantee will expire if repairs or modifications to the device are carried out by people other than our service department, and also if the device is fitted with components or accessories that are not original, which subsequently result in a defect.
3. The guarantee is offered under the condition that defect components will be repaired as we see fit or will be replaced by suitable components. Devices that can be transported normally (e.g. in a car) must be returned to the point of sale so that they can be serviced. Devices that cannot be transported normally will be repaired on-site. Valid proof of purchase must always be presented when repairs are carried out under the guarantee. Replaced components will become our property.
4. If a complaint is deemed unfounded, all incurred costs will be charged to the consumer.
5. Repairs during the guarantee period will not result in the guarantee period being extended.
6. Additional or other claims, particularly compensation claims for damage incurred outside the device, are excluded unless such liability has been prescribed by law.
7. Furthermore, in accordance with legal provisions, we bear unlimited liability for damage that falls under product liability laws and for all damage caused by deliberate contractual breaches, gross negligence and malice on our part or the part of our legal representatives or persons we have appointed.

Service number for the Netherlands : 0900-0404040
Service number for Belgium : 0032-(0)38080919
www.everglades.nl 

References

• EVERGLADES WITGOED - Everglades Witgoed

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>