Ottoadapter CA360 MX CarPlay/ Android Auto/ AirPlay Adapter User Manual

Ottoadapter CA360 MX CarPlay/ Android Auto/ AirPlay Adapter

Specifications

• Supports CarPlay, Android Auto, and AirPlay
• Compliance: Part 15 of FCC Rules
• Operation Conditions: No harmful interference caused; must accept received interference

This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:

1. This device may not cause harmful interference ；
2. This device must accept any interference received, including interference that may have caused undesired operation.

Scan the QR code to view the English user manual and discover the latest and most detailed product information.

Product Overview

What’s in the box

• 1* Wireless adapter
• 1* USB cable (Type-C to A)
• 1* USB cable (Type-C to C)
• 1 User manual 1

Connection diagram

NOTE! The adapter should be plugged into the USB port that is for wired Apple CarPlay connecting if there are multiple USB ports in your car.

Connect to CarPlay

1. Connect this Bluetooth device
2. Proceed to pair it with your phone
3. Obtain the permission to sync Contacts
4. Confirm product’s Bluetooth name
5. Enter the main interface of the product
6. Use CarPlay

AirPlay projection

1. Disconnect Bluetooth connection
2. Double-press this button to enter the AirPlay interface and follow the interface prompts to operate
3. Enter the main interface of the product.

How to quickly switch to another phone

1. The device takes record of the last two recently connected phones.
2. Restarting the device automatically connects you to the last connected phone
3. Pressing this button will automatically disconnect the current phone with a flashing red light.
4. When the light tuns blue,it will automatically connect to the other recorded phone.

Lights & Buttons

Firmware update

Firmware updating is NOT recommended when every function works well.

NOTE/ The red and blue indicator lights will flash alternately while updating. Wait for more than 30s after light is always on, then disconnect and reconnect the adapter from the USB port to finish the whole update.

Update on iPhone

1. If your iPhone is connecting to the wireless CarPlay, enter 192.168.1.101 on the iPhone’s browser, next tap “Update” if there is an update available.
2. If your iPhone cannot connect to the wireless CarPlay, please join the adapter’s WiFi network AdapterMX-xxxx] manually and the password is 88888888. Next, enter 192.168.1.101 on iPhone’s browser, and tap “Update”.

Update on Android smartphone

1. If you have connected to Android Auto wirelessly, disable Bluetooth and forget the WiFi network first.
2. While powered on, press the button and hold for 3s then release. The LED indicator will switch to a green light after 1-2 seconds.
3. On your phone, go to WiFi » Advanced settings » WiFi direct, tap [AdapterMX-xxxx] and make sure it has connected.
4. Enter 192.168.1.101 on the smartphone browser, and next tap “Update” if there is an update available.

How to report an issue

If you encounter any issue while using the adapter, you could directly report the issue online and send us the screenshot of the feedback. We will fix it as soon as possible.screenshot.

• For iPhone users, please enter 192.168.1.101 on your iPhone browser to submit the issue details after connecting to the WiFi network [AdapterMX-xxxx)
• For Android users, please follow the steps of [update on Android smartphone] on the previous page, then enter 192.168.1.101 to submit the issue.

FAQ

• Q: How do I know which USB port to connect the adapter to?
  • A: Connect the adapter to the USB port designated for wired Apple CarPlay connection in your car.
• Q: Can I use CarPlay without syncing contacts and favorites?
  • A: Yes, CarPlay will work without syncing contacts and favorites over Bluetooth.
• Q: How do I switch to AirPlay mode?
  • A: Double-press the button on the device to enter AirPlay mode and follow the on-screen prompts.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>