Ottoadapter MX-xxxx Wireless Apple CarPlay Android Auto Adapter User Guide

Ottoadapter MX-xxxx Wireless Apple CarPlay Android Auto Adapter

Product Information

Product Specifications:

• Compatible with iPhones for wired Carplay
• Supports wireless Carplay, wireless Android Auto, and Mirroring
• Bluetooth name: AdapterMX-xxxx
• WiFi name: AdapterMX-xxxx
• WiFi password: 88888888
• Indicator light colours and functions:
  • Power on: Red light always on
  • Communication protocol: Blue light flashes
  • Normal operation: Blue light always on
  • P2P upgrade mode: Green light always on
  • Upgrading: Red and blue lights flash alternately
  • Upgrade completed: White light always on
  • Upgrade exception: Flashing red
  • Reset successful: White light flashes until the button is released

Product Usage Instructions

Connecting MX for Wireless Carplay, Wireless Android Auto, and Mirroring:

Wireless Carplay:

1. Plug MX into the car’s USB interface.
2. Turn on WiFi and Bluetooth on your phone.
3. Connect your phone to MX’s Bluetooth (Bluetooth name: AdapterMX-xxxx).
4. Click Allow for all prompt pop-ups on your phone.
5. Access the Carplay interface.

Wireless Android Auto:

1. Install the Android Auto App on your smartphone.
2. Enable [Wireless Android Auto] in the App settings.
3. Plug MX into the car’s USB interface.
4. Pair your phone’s Bluetooth with MX (device name starts with AdapterMX-xxxx).
5. Allow all pop-ups on your phone to establish the connection.

iPhone Mirroring:

1. Double-click the function button to enter screen projection mode.
2. Connect your phone to MX’s WiFi (WiFi name: AdapterMX-xxxx, WiFi password: 88888888).
3. Follow the screen projection steps on the car’s screen.

Upgrading Firmware:

Methods:

1. Click on the APP Firmware Update to upgrade.
2. If using an iPhone:
3. If connected to wireless Carplay, visit http://192.168.1.101 and click Update.
4. If not connected, connect to AdapterMX- WiFi, then visit the same link for updates.
5. If using Android:
6. Enter P2P upgrade mode by using the function button.
7. In phone settings, connect to AdapterMX-xxxx in WiFi Direct.
8. Visit 192.168.1.101 in the browser and click Update after ensuring mobile data usage.

Submitting Product Usage Logs:

Methods:

1. Click Report Log on the APP to upload logs.
2. If using an iPhone

Function usage

How to connect MX to use wireless carplay, wireless Android Auto, and Mirroring?

Connect wireless Carplay

1. MX is plugged into the USB interface of the car, which is an interface for connecting iPhones using wired carplay.
2. Make sure your phone’s WiFi and Bluetooth options are both turned on. Settings – Network & Internet
3. Use your mobile phone to connect to the Bluetooth of MX. Bluetooth name: AdapterMX-xxxx. After Bluetooth pairing, the Bluetooth interface will appear on the car interface (picture below). (Sometimes you have to click on the CarPlay icon on the car display to enter.
4. After connecting to Bluetooth, you need to click Allow for all prompt pop-ups that appear on your phone. After allowing, you can enter the carplay interface

Connect wireless Android Auto

1. Install the Android Auto App on your smartphone, and then enable [Wireless Android Auto] in the Android Auto App settings. Please make sure your phone’s Wi-Fi and Bluetooth functions are turned on.
2. Plug MX into the USB interface, then you can see the device name starting with ” AdapterMX-xxxx ” on the phone, and pair the phone’s Bluetooth with it.
3. Once the connection is complete, allow all pop-ups. At this time, you can connect your phone to MX and use the wireless Android Auto function normally.

Using iPhone Mirroring

1. Quickly click the function button twice to enter the screen projection mode, and the screen projection guidance interface will appear on the screen of the car.
2. Follow the screencasting steps, connect your phone to MX’s WiFi, WiFi name: AdapterMX-xxxx, WiFi password: 88888888
3. Enter the quick navigation settings to find Airplay and click on the name of MX to enter iPhone screen mirroring.

Which cars can be used?

• This device works with all cars with wired CarPlay and wired Android Auto
• The car has both wired CP and wired AA functions, and can use wireless CP, wireless AA, and screen projection.
• If the car only has a wired CP, it can only use the wireless CP and screen projection functions, but cannot use the wireless AA function.
• If the car only has wired AA, it can only use the wireless AA function, and cannot use the wireless CP and screen projection functions.

Which mobile phones can be used?

Iphone:
This device supports iPhone iOS 10 and higher Android phones: one with mobile data and 5 GHz support Wi-Fi mobile phones, wireless Android Auto can support Android versions: Any phone with Android version 11.0 and above Google or Samsung mobile phone system version A is Android 10.0 and above A Samsung Galaxy S8, Galaxy S8+, or Note 8, with Android 9.0

Indication of light status

• Power on: the red light is always on
• Communication protocol (waiting for connection): blue light flashes
• Normal operation: blue light always on
• P2P upgrade mode: The green light is always on
• Upgrading: Flashing red and blue alternately
• Upgrade completed: white and always on
• Upgrade exception: flashing red
• Reset successful: white light flashes until the button is released

How to upgrade firmware?

method 1
Click on the APP Firmware Update to upgrade.

Method 2 iPhone
If your iPhone is connected to wireless CarPlay, make sure the phone can use mobile data normally, enter http://192.168.1.101 on the iPhone’s browser, and click “Update” if an update is available.

If your phone is not connected to wireless CarPlay, turn on WLAN, find the Wi- Fi starting with ” AdapterMX- “, and connect with the password 88888888. After the connection is successful, open the website Http://192.168.1.101 and make sure the phone can use mobile data normally. You can find “Updates” on the website. If there is an update available, click on it to upgrade your device.

Method 3 Android

1. Use the function button to enter the P2P upgrade mode. At this time, the green light is always on.
2. On your phone, go to WiFi>>Advanced Settings>>WiFi Direct, click [ AdapterMX -xxxx], and make sure it is connected
3. Make sure the phone can use mobile data normally, enter 192.168.1.101 on the smartphone browser, and then click “Update”

How to submit product usage logs?

Method 1
Click Report Log on the APP Upload log.

Method 2 (iPhone)
If your phone has been connected to the adapter to use wireless carplay, enter the URL 192.168.1.101 in the browser to enter our server backend to ensure that the phone can use mobile data normally. Please fill in the car brand, model year and problem details, and then click ” Submit” to report a problem. Once the success notification appears, please take a screenshot and email us. We will fix it as soon as possible. Our technical support email is support@ottocast.com.

If the device is not connected, you can directly connect to the WIFI of the adapter. The WiFi name is AdapterMX- ××××, enter the password 88888888, and then enter the URL 192.168.1.101 in the browser to enter our server background to ensure that the mobile phone can be used normally. data, please fill in the car make, model year, and problem details, then click “Submit” to report the problem. After the success notification appears, please take a screenshot and send an email to us. We will fix it as soon as possible. Our technical support email is support@ottocast.com.

Method 3 (Android phone)
1-2 of [Firmware Update] Method 3 on the previous page, make sure the phone can use mobile data normally, and then enter 192.168.1.101 again on the browser to submit the issue.

How to reset the system?

Method 1
steps of [Firmware Update] Method 3 on the previous page, make sure the phone can use mobile data normally, and then enter 192.168.1.101 again on the browser to reset your device.

Method 2
After long pressing for more than 15 seconds, the light will flash white, clear all connection records and then restart (restart only after releasing it)

Key Function

• After the product is powered on, double-click the button: enter the image
• Press once after connecting to wireless CP/AA: disconnect the currently connected mobile phone
• After powering on, press and release for about 3 seconds: switch to P2P upgrade mode (this mode allows Android phones to connect to Wi-Fi directly to upgrade the product)
• After long pressing for more than 15 seconds, the light will flash white, clear all connection records and then restart (restart only after releasing it)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>