Aqara WP-P01D Wall Outlet H2 EU User Manual
- September 21, 2024
- Aqara
Table of Contents
Aqara WP-P01D Wall Outlet H2 EU
Product Specifications
- Made in China
- Model: WP-P01D
- Wireless Protocols: Zigbee
- Rating: 250V~, 16A, 50/60Hz
- Operating Humidity: 0 ~ 95% RH, no condensation
Product Usage Instructions
Installation
Pre-installation instructions:
- Disconnect the main power switch at home before installation.
- Prepare a Phillips screwdriver before installation.
- Ensure that the depth of the socket box where the socket is installed is at least 50mm.
Installation steps:
- Remove other sockets and mark the Live wire, Null wire, and Ground wire.
- Open the socket package and take out the socket H2 and screw accessories.
- Loosen the screw in the center of socket H2 to remove the decorative cover and middle frame.
- Connect Live wire, Ground wire, and Null wire to the power interface on socket H2 and tighten the screws.
- Fix the socket to the screw hole post on the box using the provided screw accessories.
- Install the middle frame and decorative cover to complete the installation.
Preparation Before Use
- An Aqara Zigbee 3.0 hub is required (distance between product and hub should be within 30m).
Device Binding & Initialization
- Download the Aqara Home app from your app store.
FAQ
- Q: What wireless protocols does the Wall Outlet H2 EU support?
- A: The Wall Outlet H2 EU supports Zigbee wireless protocols.
- Q: What is the maximum work current of the Wall Outlet H2 EU?
- A: The maximum work current of the Wall Outlet H2 EU is 16A.
- Q: Which platforms is the Wall Outlet H2 EU compatible with?
- A: The Wall Outlet H2 EU is compatible with platforms such as Apple Home, Google, Alexa, Yandex, IFTTT.
Product Instruction
Wall Outlet H2 EU is a smart wall outlet product based on Zigbee protocol. The maximum Work current reaches 16A, and it can realize remote control, timing control, power metering, equipment group control and other socket intelligent functions. At the same time, it also supports access to platforms such as Apple Home, Google, Alexa, Yandex, IFTTT.
Installation introduction
Pre-installation instructions:
- Please disconnect the main power switch at home before installation
- Please prepare a Phillips screwdriver before installation
- Please ensure that the depth of the socket box where the socket is installed is at least 50mm
Installation steps
- Remove the other sockets used first and mark the Live wire, Null wire and Ground wire in the wires in advance.
- Open the socket package and take out the socket H2 and screw accessories in the package.
- Use a cross screwdriver to loosen the screw in the center of socket H2, and remove the decorative cover, middle frame of socket H2 respectively.
- Connect the Live wire, Ground wire and Null wire to the L, ,N power interface on socket H2 in sequence, and tighten the fastening screws of the power interface.
- Use the screw accessories in the package to fix the socket to the screw hole post on the box.
- Install the middle frame and decorative cover in sequence,and fix the above components with screws to complete the installation
Preparation Before Use
- An Aqara Zigbee 3.0 hub is required (The distance between this product and your hub should be within 30 m).
Device Binding & Initialization
- Download the Aqara Home app. Search for “Aqara Home” in the Apple App Store, Google Play, Xiaomi GetApps, Huawei App Gallery, or scan the following QR code to download the Aqara Home app:
- Add the product to the Aqara Home appPlease open the Aqara Home app, tap “Home” and then tap “+” in the top right corner to enter the “Add Device (Accessory)” page. Select “Wall Outlet H2 EU” and the hub to be connected to, and add it according to instructions in the Aqara Home app. Alternatively, after resetting the device, click on the Wall Outlet H2 EU device pop-up on the Aqara Home app and follow the app prompts to bind and add it. Press and hold the RESET button for 5 seconds, and wait for Wait for the device indicator light to turn blue and flash.
For more detail about the product, please scan the QR code below to view the electronic version of the manual
Product Specifications
- Wall Outlet H2 EU
- Model: WP-P01D
- Rating: 250V~, 16A, 50/60Hz
- Made in China
- Wireless Protocols: Zigbee
- Dimensions: 86 × 86 × 47.7 mm (3,39 × 3,39 × 1.88 in.)
- Operating Temperature: -10 °C ~ 40 °C (14 °F ~ 104 °F)
- Operating Humidity: 0 ~ 95% RH, no condensation
- What is in the Box: Wall Outlet H2 EU × 1, User Manual × 1, Screw Kit × 1
Warnings
- If you need to install the socket on other connecting frames, please try to use the built-in fixing screws in the packaging as much as possible
- Non professionals are not allowed to install or disassemble this product without authorization. Please ensure that the power supply is turned off when installing the product
Zigbee Operation Frequency: 2405-2480 MHz
Zigbee Maximum Output Power: ≤13dBm
Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
EU Declaration of Conformity
Hereby, Lumi United Technology Co., Ltd declares that the radio equipment type Wall Outlet H2 EU, WP-P01D is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.aqara.com/DoC/
WEEE Disposal and Recycling Information
All products bearing are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points
Contact
- Manufacturer: Lumi United Technology Co., Ltd.
- Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No. 3370,
- Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan
- District, Shenzhen, China
- Online Customer Service: www.aqara.com/support
- Email: support@aqara.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>