Rasonic RMC-X85B USB Chopper Instruction Manual

Rasonic RMC-X85B USB Chopper

Product Specifications

• Model: RMC-X85B / RMC-X85P / RMC-X85V
• Power: 150W
• USB: DC 5V / 2A
• Capacity: 850ml
• Speed: 2,000 RPM
• Dimensions: 158mm x 158mm x 238mm

Product Usage Instructions

Important Safeguards

1. Before Use:
   • Read the operation manual carefully to prevent fire, electrical shock, or personal injury.
   • Remove all packing materials to prevent misuse by children.
   • Avoid overloading by not using high-wattage appliances on the same power socket.
   • Use the provided USB charging cable with a DC5V / 2A USB adapter to charge the appliance.
2. Operating:
   • Place the appliance on a stable, flat, and horizontal surface away from humid environments, heat sources, and flammable objects.
   • Check that accessories rotate freely before adding food to avoid obstructions or overloading.

Before First Use

• Ensure all parts are clean and properly assembled before using the USB chopper for the first time.

Operation Instructions

• Follow the steps outlined in the manual for proper ingredient preparation and precautionary measures during operation.

Cleaning and Storage

• After each use, clean the appliance thoroughly and store it in a dry place to prevent damage or malfunctions.

Frequently Asked Questions

Q: What should I do if the USB chopper does not turn on?

A: Check the power connection and ensure that the USB charging cable is securely plugged into a compatible adapter and power socket.

Q: Can I wash the removable parts in a dishwasher?

A: It is recommended to hand wash the removable parts with mild detergent and warm water to maintain product longevity.

• Read the operation manual carefully before using it. Keep it in a safe place for future reference.
• Some figures in the manual may not match with the real object, just for reference only.
• Thank you for choosing Rasonic USB Chopper. Read the manual carefully before using and well keep it for future reference.

Important Safeguards

When using the appliance, make sure to follow the safety precautions below:

Before use

1. Read the operation manual carefully when using the appliance. Failure or negligence in following precautions could cause fire, electrical shock, or personal injury.
2. Remove and discard all packing materials of the appliance. To prevent children from using it as a toy and causing danger.
3. Do not plug in extension unit or the same power socket with other high-wattage appliances to avoid overloading. Also, check whether the rated voltage on the appliance is the same as the local voltage.
4. Insert the provided USB charging cable to DC5V / 2A USB adapter (NO USB adapter supplied with the appliance), and power socket to charge the appliance.
   • CAUTION! A specific separated power supply unit is required to connect this appliance to the power supply.

Operating

1. Always place or use the appliance on a stable, flat and horizontal surface.
   • Never operate the appliance in following places:
   • Humid environment or near water sources;
   • High temperature or places subject to direct sunray;
   • Near heat sources (e.g. electric oven or induction cooker) or fire sources;
   • Unstable surfaces;
   • Near flammable or non-resistant to heat objects (e.g. carpet, paper sheet, table cloth, curtain and towel, etc.);
2. Before inputting food, check whether the accessories are securely installed and can rotate freely smoothly. If you find that the accessories cannot rotate or rotate slowly, do not place the main unit on top and check if any obstacles stuck or the amount of food inside exceeds “MAX” level of the glass container. If so, remove the obstacles or excessive food beforehand.
3. To avoid injury, do not try to lift up the main unit when the appliance is operating.
4. The appliance can withstand a temperature range of 0- 40˚C. To avoid damage and deformation, do not place hot ingredients (over 40˚C) into the glass container or wash the appliance and accessories with hot water (over 40˚C).
5. CAUTION! Avoid adding liquid, otherwise the liquid may spray out during operation, causing damage.
6. Do not operate the appliance when the container cover is not well installed; otherwise it may cause injury.
7. Do not put your finger or utensils such as spoon, fork etc. into the glass container during operation. Otherwise, it may cause injury, electric shock or fire.
8. Do not place heavy objects on the switch button and leave them unattended or empty glass containers during operation, it may result in fire or combustion due to overheating.
9. If the blade assembly gets stuck, stop using the appliance immediately. Do not attempt to insert your finger into the glass container. Make use of rubber spatula to remove the ingredients which blocked the blade assembly; otherwise, it may cause injury.
10. The appliance is not suitable for handling hard ingredients such as meat with bones, frozen food, coffee beans, peppers, ice cubes or sticky foods. Make sure to take out all the fruit stones before operation.

After use

1. Attention should be paid when handling the sharp cutting blades during emptying or cleaning the glass container. It may cause injury.
2. USB charging unplugs before when not using appliance, dismantling or installing accessories and cleaning.
   • CAUTION! Ensure that the blade assembly stop turning before lifting it up.
3. The appliance and accessories may get stained after use. It is because ingredients contain pigment itself. This is a normal phenomenon, causing no damage to the human body.
4. Never immerse the main unit, USB charging cable or USB adapter into water or let them wet as it will affect its safety performance, and cause electric shock. Make sure the USB adapter is dried before use. Do not add ingredients that exceed the “MAX” level of the glass container. Follow Ingredient Preparation Precautions”, otherwise it may cause severe vibration or malfunction.
5. After charging, unplug the USB charging cable to prevent electric shock due to insulation aging. Do not touch, plug in or unplug with wet hands, it may cause electric shock.

Important Safeguards

1. Do not insert metallic objects (such as pins or wire etc.) into the enclosure gaps to avoid electric shock or other dangers.
2. The appliance is not intended to be operated by means of an external timer or a separate remote control system.
3. Do not place the accessories into microwave heating or place them into dishwasher washing. Do not use a dish dryer to dry the appliance and accessories. Otherwise, may cause the appliance or accessories to burn, deteriorate, or malfunction.
4. Before cleaning, make sure to unplug the appliance first, let it cool down and the blade assembly stop turning beforehand.
5. Make sure that unplugs before moving the appliance.
6. When moving the appliance, make sure to hold the glass container and main unit with both hands. Hold the glass container or main unit by one hand may result in product fell, accessory damage or injury.
7. Always keep the USB adapter clean and free of dust, and ensure the appliance is clean and oil free to prevent fire.
8. Keep it out of reach for infants. Great care is necessary in using the appliance, especially near children. Make sure that they do not play with the appliance. Also, children without adult supervision should not operate the appliance or do maintenance, and keep them away from the appliance and its USB charging cable.
9. Do not place heavy objects on the USB charging cable. Never clip, modify, stretch, or twist the USB charging cable. Make sure to grasp the USB adapter itself when plugging in or unplugging the appliance rather than grasping the USB charging cable. Insert the USB adapter firmly into the socket; otherwise, it may cause electric shock and fire caused by abnormal heating around the USB adapter.
10. Do not operate the appliance when the USB charging cable is tangle or hang over the edge of a table, countertop or let it touch any hot surface, it may cause the appliance and USB charging cable damage.
11. Never attempt to disable the main unit safety lock.
12. The accessories are only used on the glass container provided.
13. Using accessories not provided by the original factory may cause fire, electrical leakage or personal injury.
14. During the process of chopping food, the hand or tableware should not touch the blade to avoid a safety risk, resulting in personal injury or damage to the product; If you need to use the rubber spatula, you must ensure that the product is stopped before it can be used.
15. Check that the voltage you are using matches the voltage rating of the appliance.
16. Open the container cover before blade assembly completely stop turning.
17. The blade assembly is very sharp. Be careful when taking down the protective sleeve, and cleaning and maintaining it, to prevent cutting.
18. a glass container is fragile, handle it with care during use and storage to prevent collisions.
19. The power source used by the appliance is a lithium-ion battery. It is prohibited to put your finger on the power button when carrying the appliance and it is prohibited to charge the battery when it is started.
20. Any modification or use of other lithium-ion batteries may cause injury and fire risks. Warranty becomes invalid.
21. In case of improper use, the battery may leak. Avoid contact with the battery liquid to avoid irritation burns. If the liquid contacts the eyes, seek medical advice immediately.
22. The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
23. The appliance is intended to be used in household or similar applications such as staff kitchens in shops, offices, and other working environments; by clients in hotels, motels, and other residential-type environments. Do not use it outdoors and for any purpose or method which is not stated in the manual. (Misuse may cause potential injury and product damage.) If the appliance is used improperly, for commercial (or semi-commercial) use, the warranty becomes invalid and our company will refuse any liability and repair cost for the damage caused.
24. Always check if the main unit, USB charging cable, and USB adapter are damaged or abnormally hot. To avoid hazards, stop using the appliance immediately and contact Shun Hing Electric Service Centre Limited for checking and repair if any part is damaged. Do not attempt to refit the appliance by yourself or replace any unauthorized parts other than the supplier; otherwise, it can cause hazards and the warranty will become invalid.

Cleaning and Storage

1. After using the appliance, clean it in time for the next usage.
2. Before cleaning, let it cool down and the blade assembly stop turning beforehand.
3. Main unit cleaning: Do not rinse the main unit with water directly. Use a damp cloth to clean the enclosure. If it is too dirty, wipe it with a little mild detergent, then wipe with a damp cloth (When cleaning the main unit, the USB rubber plug must be tightened).
4. Accessories cleaning: Blade Assembly, Container Cover, Glass Container, plastic pad, Whisk, Peel garlic assembly clean them with soft brush or sponge moistened with mild detergent. Never use cleaning powder or harsh cleaning tools (e.g. metal wired brush). Beware not to touch the sharp blades when rinsing.
5. Never use poisonous or corrosive detergent for cleaning.
6. After cleaning, let the appliance cool down completely before storage. Put it in a box and store it in a dry place. When store, never wrap the USB charging cable tightly around the main unit or place pressure on it to avoid USB charging cable damage.

Product Specifications

Product Size

(W x D x H) (Approx.)

| 158 x 158 x 238 mm

Product Descriptions

1. Switch button
2. Main unit
3. Container cover
4. Glass container
5. Plastic pad
6. Blade assembly
7. Egg whisk assembly
8. Peel garlic assembly
9. USB charging cable (NO USB adaptor supplied with the appliance)

Before the first use

• Before using this product for the first time, make sure that the battery of the product is fully charged, clean the blade assembly, container cover, glass container, bowl pad, egg whisk assembly, peel garlic assembly with water and a soft brush or sponge moistened with a mild detergent wipe.
  CAUTION! The main unit can only be with a cloth, and cannot be soaked in water.

• CAUTION! Remove and discard all packing materials of the appliance.

• CAUTION! The blades are very sharp, avoid physical contact when cleaning the appliance, you may be hurt seriously.

• CAUTION! Do not rinse the appliance directly as to avoid water penetrating inside (especially near the USB charging cable) to prevent malfunction and hazard.

Operation Instructions & Ingredient Preparation Precautions

Operation Instructions

Make sure the appliance is fully charged before use.

1. Place the accessory to the driving axis in the middle of the glass container before putting food.
2. Follow the instructions on “Chapter 6.5 Ingredient Preparation Precautions” by putting appropriate amount of ingredients into the glass container.
   • Make sure the accessory installed on the spindle in the glass container. CAUTION! The amount of ingredients added must not exceed “MAX” Level!
3. Close the container cover and place the main unit on top.
   • CAUTION! Check if the main unit, container cover and accessory are all properly installed in right position.
4. After press and hold the “switch button” button, the appliance will start.
5. Release the “switch button” and the product will stop working.
6. When start operating, the LED indicator light shows the current power of the battery; In the process of operation, the normally on LED indicator gradually decreases until the power is exhausted, the product stops working and cannot be started, and the last LED light flashes to remind it to go out.
7. When the product is fully charged before operation, the single working times is no more than 30 seconds (except with egg whisk assembly), and the product can operate approx. about 8-10 times.
8. The blade assembly operates for a maximum of 30 seconds each time, then stops for 2 minutes and lets the appliance rest and cool down in one cycle. After 3 consecutive cycles let it cool down for 15 minutes. Restart the operation after the appliance is cooled down so as not to cause overheating and appliance damage.
9. The egg whisk assembly operates for a maximum of 1 minute each time, then stops for 2 minutes lets the appliance rest, and cools down as one cycle. After 3 consecutive cycles let it cool down for 15 minutes. Restart the operation after the appliance is cooled down so as not to cause overheating and appliance damage.
10. The peel garlic assembly operates for a maximum of 30 seconds each time, then stops for 2 minutes lets the appliance rest, and cools down as one cycle. After 3 consecutive cycles let it cool down for 15 minutes. Restart the operation after the appliance is cool down so as not to cause overheating and appliance damage.
11. Follow the instructions in “Chapter 2 Cleaning and Storage” and clean the appliance first.

Installation and operation of Blade Assembly

1. Place the glass container on a flat countertop and mount the blade assembly on the spindle in the glass container.
   • CAUTION! As the blade is very sharp, be careful to prevent injury.
2. Put the prepared food into the glass container for ideal food handling effect, refer to “Chapter 6.5 Ingredient Preparation Precautions”.
3. Put the container cover in to the glass container positioning groove, then place the main unit on the corresponding position of the container cover. The bump on the container cover will match the hole of the main unit, adjust the angle of the main unit, and adjust the alignment according to the “·” mark on the main unit and the container cover until the main unit and the container cover are locked tightly.
4. Hold the main unit firmly, press and hold the “switch Button” to cut the food in the glass container.
5. After completion, release the “switch button”. Wait for the blade assembly stop rotating completely, remove the main unit. Open the container cover, and lift the blade assembly by holding the plastic support part of the blade assembly. Then remove the food from the glass container. Don’t use the glass container for food storage.

Installation and operation of Whisk

1. Place the glass container on a flat countertop and mount the whisk on the spindle in the glass container; put the egg white in the container.
2. Put the container cover into the glass container positioning groove, then place the main unit on the corresponding position of the container cover. The bump on the container cover will match the hole of the main unit, adjust the angle of the main unit, and adjust and adjust the alignment according to the “·” mark on the main unit and the container cover. until the main unit and the container cover are locked tightly.
3. Hold the main unit firmly, press and hold the “switch button”, stirring the egg white in the glass container.
4. After completing, release the “switch button”. Wait for the whisk to stop rotating completely, and remove the main unit. Open the container cover and lift the whisk by holding the plastic support part of the whisk. Then remove the food from the glass container. Don’t use the glass container for food storage.

Installation and operation of Peel Garlic Assembly

1. Place the glass container on a flat countertop and mount the peel garlic assembly on the spindle in the glass container; Cut off the roots and break them into garlic cloves before putting the garlic in the bowl. (Refer P.1)
2. Put the container cover into the glass container positioning groove, then place the main unit on the corresponding position of the container cover. The bump on the container cover will match the hole of the main unit, adjust the angle of the main unit, and adjust the alignment according to the “·” mark on the main unit and the container cover until the main unit and the container cover are locked tightly.
3. Hold the main unit firmly, press and hold the “switch button” to peel the garlic in the glass container.
4. After completed, release the “switch button”. Wait for the peel garlic assembly to stop rotating completely, remove the main unit. Open the container cover and lift the peel garlic assembly by holding the plastic support part of the garlic peeling assembly. Then remove the food from the glass container. Don’t use the glass container for food storage.

Ingredient Preparation Precautions

To prolong the life cycle of the appliance and to achieve good performance, refer to the following suggestions to operate the appliance.

Ingredient| Amount of Ingredient (Approx.)| Mixing Time Recommended (Approx.)| Recommended Special Reminder
---|---|---|---
Fruit and vegetables| 120g| 20 seconds| Cut into approx. 2 x 2 x 2 cm
Egg White| Put in the 4 egg whites at most| 1 minute| –
Pork| 300g| 30 seconds| Remove the skin, bone and tendons, then cut into approx. 2 x 2 x 2 cm
Garlic| 50g| 15 -30 seconds| –

• The amount of food and operating time above are for reference only. To avoid poor rotation or malfunction of the blade assembly, do not exceed the “MAX” position of the glass container when using.
• The amount of ingredients that can be processed will vary depending on the ingredients.
• Do not shake the appliance during operation.

Charging mode

1. The product has three white LED lights to display the power.
2. Place the product on the table, insert the provided USB charging cable to DC5V / 2A USB adapter (Not supplied USB adapter with the appliance), and power socket to charge the appliance.
   • When charging the white LED light flashes according to the power saturation.
3. When the battery is fully charged, the three LED indicators are always on.
4. Appliance battery single charge should not exceed 6 hours. The charging cable must be unplugged after the appliance battery is full charged.
5. The product cannot work during charging.

Charging precautions

The product has a built-in lithium battery, please pay attention to the following matters:

1. Store and use the product in a 0-40℃ environment;
2. If not used for a long time, charge it every 3 months to prevent battery damage.
3. Charging may slow down in an environment below 10℃, which is normal.
4. Charge in time when the battery is low.

Overload and high-temperature alarm prompt

1. If the blade assembly of the product is stuck or the load exceeds the maximum scale, the product will stop rotating for protection, and the three LED lights will flash synchronously to indicate that it will go out in 3 seconds; after the abnormal fault of the product is eliminated, the product will be started again and resume normal.
2. If the battery temperature reaches 55℃ in the process of operation the product stops working, and three LED lights flash synchronously. At this time, release the “switch button” for 5 seconds, and the LED light will go out. The battery temperature drops below the standard temperature; it can start normally.

Troubleshooting and Treatment

Press and hold the [Switch Button], but the appliance does not operate and the power indicator light is off.| The battery is exhausted.| Use the appliance after charging.
Press and hold the [Switch Button], but the appliance does not operate and the power indicator light is on.| The main unit and accessory are not installed properly.| Follow the instructions “Chapter Operation Instructions install appliance properly.
Press and hold the [switch button], but the appliance will automatically stop operating after one minute| Prevent overheating caused by long-term operation| The maximum operating time of the appliance at a time is one minute. The appliance will automatically stop operating after one minute. Follow the instruction “Chapter 6 Usage and Precautions for Preparing Ingredients” to use and cool down the appliance.
Press and hold the [Switch Button], but the appliance does not operate and the power indicator light is flashing.| Too much ingredients put in glass container.| Ingredients do not exceed the maximum capacity level mark “MAX” of the glass container.
Too large ingredients size put in glass container.| Cut ingredients into no larger than 2 x 2 x 2 cm
Appliance temperature too high.| Wait for appliance to cool down before use.
When charging the indicator light is off.| USB  charging   cable damaged.| Replace with a new USB charging cable.
The appliance is stored for too long, resulting in insufficient power.| Continue to charge for half an hour and then observe again.
Symptoms| Reason| Remedy
---|---|---
The appliance has an odor.| It is a normal phenomenon for new appliances to have odor at first use.| If used many times, it still has an odor. Contact Shun Hing Electric Service Centre Ltd. for checking and repairing.
The appliance has abnormal vibration or noise.| The main unit and accessory are not installed properly.| Follow the instructions in “Chapter 6 Operation Instructions” to install the appliance properly.
The   appliance   is   not placed on a flat surface| Place the appliance on a flat.
Excessive food ingredients.| Ingredients do not exceed the maximum capacity level mark “MAX” of the glass container.

If the above solutions cannot fix the problem, do not attempt to modify the appliance by yourself and please contact Shun Hing Electric Service Centre Ltd. to check and repair.

Special Avowal

1. The information above has been checked; our company reserves the hermeneutic power to any print errors or misunderstandings in the content.
2. Please note that any technology improvement will be added to the new versions of operation manual without any prior notices. The product appearance and color are subject to the actual appliance.
3. In case there is any inconsistency or conflict between the English version and Chinese version, the Chinese version shall prevail.
4. E-copy of operation manual can be sent by e-mail on request, please call Shun Hing Electric Works and Engineering Co., Ltd at 2861 2767.

After Sales Service

1. For any defect, in the judgment of the technician from Shun Hing Electric Service Centre Limited, caused under normal use, our company is responsible for repairing or replacing parts of the said electrical appliance free of charge within a year guarantee period commencing from the date of purchase. Any defective part which has been replaced shall become our property. Guarantee service does not cover the repair or replacement of consumable parts etc.
2. The user must present the official invoice/redemption voucher and the product warranty card with the chop from the sales point/redemption center for maintenance.
   • For inquiries, please call the Shun Hing Electric Service Centre Limited hotline at 2406 5666.

SHUN HING ELECTRIC WORKS AND ENGINEERING CO., LTD.

• 2861 2767
• http://www.rasonic.com
• 2865 6706
• shew@shunhinggroup.com
• Office: 9/F, Peninsula Centre, 67 Mody Road, Tsimshatsui East, Kowloon, Hong Kong
• Tel: 2861 2767 Fax: 2865 6706
• Website: http://www.rasonic.com
• E-mail: shew@shunhinggroup.com
• 11/F, Shun Hing Centre, 2 Shing Yiu Street, Kwai Chung, N.T. HK
• Tel: 2406 5666 Fax: 2408 0316
• Website: https://www.shunhing-service.com/en
• Customer Service Centre
• 1/F, Shun Hing Centre, 2 Shing Yiu Street, Kwai Chung, N.T.
• 9/F., Block B, Peninsula Centre, 67 Mody Road, Tsim Sha Tsui East, Kowloon
• 22/F, Parkview Centre, 7 Lau Li Street, Tin Hau, Hong Kong
• Avenida de Venceslau de Morais, No. 193-199, 5 andar – I, Edf. Industrial Nam Leng, Macau
• https://www.shunhing-service.com/zh
• For the latest information on Hong Kong and Macau service centers, please visit: https://www.shunhing-service.com/en

Documents / Resources

| Rasonic RMC-X85B USB Chopper [pdf] Instruction Manual
RMC-X85B, RMC-X85B USB Chopper, USB Chopper, Chopper
---|---

References

• Shun Hing Electric Service Centre Ltd
• Shun Hing Electric Service Centre Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>