anko 43441808 Christmas Tree Instructions
- September 20, 2024
- Anko
Table of Contents
43441808 Christmas Tree
“`html
Product Information
Specifications
- Model: Columbia Christmas Tree – Tree B
- Height: 1.82 meters (6 feet)
- Keycode K: 43441808
- Keycode T: 70022124
Product Usage Instructions
-
Slide stabilizing legs into the base of the tree trunk until
firmly secure. -
Place the tree stand on a level surface, assemble the tree
stand, and insert the connection pole into the tree stand. -
Insert Section A into Section B.
-
Lower all main branches on the bottom level and position them
parallel to the floor, shaping as desired. -
Straighten and separate all small branches. Bend the tip end
slightly upward in a ‘V’ shape to match the rest of the tree for
better results.
Warnings
- This product is for indoor use only.
- Keep product away from fire and other heat sources.
- Recommend saving instructions for future reference.
Packaging Up and Storage Tips
-
Remove all lights and ornaments.
-
Remove sections as places, Section A and Section B.
-
Slide legs down and remove from slots at the base of the tree
trunk. -
Press branches against the stem before placing each tree
section in the carton. -
Pack the carton and store in a dry and damp-free area.
-
Do not place the product in direct sunlight or where
temperatures exceed 40 degrees.
Made in China
FAQ
Q: Can this tree be used outdoors?
A: No, this product is for indoor use only.
Q: How should I store the tree after Christmas?
A: Follow the packaging up and storage tips provided in the
manual to ensure safe storage for future use.
“`
1.82M (6FT) COLUMBIA CHRISTMAS TREE – TREE B
KEYCODE K: 43441808 T: 70022124
Contents A. Tree Top B. Tree Body C. Plastic Stand D. Connection Pole
A
B
C
D.
E.
Instructions
- Slide stabilising legs into base of the tree trunk until firmly secure. 2)
Place the tree stand on a level surface, assemble the tree stand
and insert the connection pole into the tree stand. 3) Insert Section A into Section B 4) Lower all main branches on the bottom level and position so
they are parallel to the floor, shape as desired. 5) For better result, straighten and separate all the small branches. Then, bend
tip end slightly upward in a ‘V’ shape to match the rest of the tree.
Warnings: - This product is for indoor use only. 2) Keep product away from fire and
other heat sources 3) Recommend saving instructions for future reference.
Packaging Up and Storage Tips - Remove all lights and ornaments. 2) Remove sections as places, Section A
and Section B. 3) Slide legs down and remove from slots at the base of the
tree truck. 4) Each tree section, the branches should be pressed against the
stem before placing in
carton. 5) Pack carton and store in a dry and damp free area. 6) Do not place product in direct sunlight or in an area where temperatures exceed 40
degrees. Made in China