KEWISAUTO F-150 Wireless Charger Storage Box User Manual

KEWISAUTO F-150 Wireless Charger Storage Box

Product Specifications

• Product Name: Ford F-150 Wireless Charger / Storage Box
• Model: F150 Wireless Charger
• Input: 5V = 2A, 9V = 1.7A
• Output: 5W, 7.5W, 10W
• Working Frequency: 115KHz-205KHz
• Charging Efficiency: 78% (Max)
• Coil Quantity: 2
• USB Port Output: 5V/1A

Installation Steps

1. Open the cover of the center control armrest box and remove the storage box if desired.
2. Insert one end of the Type-C USB cable into the Wireless Charger and the other end into the USB interface of the Car Charger.
3. Push the car’s storage box to the passenger’s side and align and adjust the Wireless Charger in the armrest box to ensure a secure fit.

Product Usage Instructions

The wireless charger features a multi-functional U-shaped partition design with three main functions:

1. Phone Size Equivalent to iPhone 13: Insert the U-shaped partition with its A-side facing up into the first groove to secure the phone from left and right movement.
2. Smaller Phone like iPhone SE2: Insert the U-shaped partition with its A-side facing down into the second groove to secure the phone.
3. Charging Bluetooth Earphone Case: Insert the U-shaped partition with its A-side facing down into the third groove.

Note: The U-shaped partition design is patented.

Thank you for choosing Wannabe as your go-to designer for over 100 different wireless chargers, tailored for a variety of car models.
At Wannabe, we value our customers and strive to ensure their complete satisfaction with every purchase. If for any reason you are not satisfied with our products,please don’t hesitate to reach out to us. We welcome the opportunity to make it right for you, and all it takes is a simple message to get in touch with us.

• On the other hand, if you are happy with your purchase, we would greatly appreciate it if you could share your experience with others. Your feedback will not only help other car owners find the right accessories for their vehicles, but it will also inspire us to continue designing the best products for our community.
• Once again, we want to express our sincere gratitude for your trust and support in Wannabe.

Package contents

1. Wireless charger x1
2. U-shaped partition x1
3. Anti-slip mat x1
4. Car charger x1
5. Type-C USB cable x1
6. User manual x1

Lamp Status Description

Switch

| Blue light On| Power on
Blue light Off| Power off

LED Indicator Light

| Green light On| Charging
Green light Flashing| Error / FOD
White light On| Fully charged

Specification

Installation Steps

1. Open the cover of the center control armrest box, and you can also remove the storage box that comes with the car according to personal preference.
2. Insert one end of the Type-C USB cable into the Wireless Charger and the other end into the USB interface of the Car Charger. Turn up the cigarette lighter cover, and insert the Car Charger.
3. Push the car’s own storage box to the passenger’s side, install the Wireless Charger by aligning the front and rear grooves of the armrest box, slightly move and adjust it to fit with all parts of the car, to ensure that the Wireless Charger will not slide easily.
   The wireless charger features a multi-functional U-shaped partition design, which serves three main functions.
   Firstly, when using a phone with a size equivalent to the iPhone 13, the U-shaped partition can be inserted with its A-side facing up into the first groove to secure the phone from left and right movement. Secondly, for a smaller phone like the iPhone SE2, the U-shaped partition can be inserted with its A-side facing down into the second groove to secure the phone.
   Lastly, when charging a Bluetooth earphone case, the U-shaped partition can be inserted with its A-side facing down into the third groove.

Note that this is a patented design.

FCC

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

CATION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be i nstalled and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Frequently Asked Questions

• Q: What do the different LED indicator light colors signify?
  • A: Blue light on – Power on, Blue light off – Power off, Green light on – Charging, Green light flashing – Charging Error / FOD, White light on – Fully charged.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>