Dynacord V600:2 Power Amplifier V Owner’s Manual

V600:2 Power Amplifier V

“`html

Specifications

• Total Rated Output Power: V600:2 – 600W,
  V600:4 – 500W/600W/500W/600W

• Number of Channels: V600:2 – 2, V600:4 –
  4

• Output Power: 4Ω/8Ω/70V/100V

• Maximum Output Power Per Channel (Power
  Sharing): V600:2 – 300W, V600:4 – 150W

• Amplifier Nominal Gain: V600:2 – 27.0 dB/30.0
  dB/33.2 dB/36.2 dB, V600:4 – 24.0 dB/27.0 dB/33.2 dB/36.2 dB

• Signal to Noise Ratio: > -100 dB/>102
  dB/>101 dB/>103 dB

• THD+N: < 0.1%

• Connectivity: Various Euroblock types and RJ45
  port

• Signal Processing: Input Routing, Filter,
  Hi-pass, Lo-pass, Peak Limiter

• Power Requirements: 100V to 240V, 50Hz to 60Hz
  AC

• Power Consumption: Idle Mode – < 12W,
  Consumption at 1/8 Rated Output Power – < 20W, Standby Mode –
  115W

• Protections: Audio limiters, high temperature,
  DC, HF, short circuit, back-EMF, peak current limiters, inrush
  current limiters, mains over/under voltage protection

Product Usage Instructions

Installation

Ensure proper ventilation for convection cooling and install the
amplifier securely in the designated location.

Power Allocation

Use the powerTANK feature to flexibly allocate power based on
your setup requirements.

Load Drive Selection

Select the appropriate Variable Load Drive (VLD) setting based
on your speaker configuration (4Ω, 8Ω, 70V, or 100V).

Connectivity Setup

Connect your loudspeakers to the corresponding Euroblock
connectors and control port using the provided cables.

Signal Processing Configuration

Adjust the input routing, filters, and limiters as needed for
optimal audio performance.

Power Management

Ensure the power requirements are met and monitor power
consumption levels to optimize efficiency.

Frequently Asked Questions (FAQ)

Q: What is the maximum output power of the V600:2

amplifier?

A: The V600:2 amplifier has a maximum output power of 300W per
channel.

Q: How many channels does the V600:4 amplifier have?

A: The V600:4 amplifier has four channels for versatile audio
setups.

Q: What protections are offered by the amplifier?

A: The amplifier provides various protections including audio
limiters, high temperature protection, DC protection, and more for
safe operation.

Q: What is the power consumption in standby mode?

A: The standby mode power consumption is 115W to ensure quick
activation when needed.

“`

Go compact, amplify smart
V Series power amplifiers for fixed installation
Designed with commercial applications in mind, V Series models are ideal for small to mid-sized installation scenarios. These compact amplifiers with a total output capacity of 600 watts are not only designed for background music and announcements ­ they also excel when higher sound pressure levels are needed. Equipped with a range of cutting-edge Dynacord technologies to ensure flawless, silent operation and energy-saving, flexible power consumption, the V Series features two- and four-channel versions with different footprints. It is possible to mix and match different V Series amplifiers according to project needs, making them a go-to choice for a variety of installations ­ all at a very attractive price point.

dualCOOL

Silent operation by convection cooling, with additional intelligent fan in case of extreme thermal conditions

powerTANK Flexible power allocation

V600:2

ecoRAIL & APD

Significant reduction of the total power consumption

V600:4

Variable Load Drive (VLD)

Providing the same power into 4 , 8 , 70 V or 100 V

V600:4 four-channel amplifier ­ The V600:4 offers easy handling and trouble- free operation in a compact 1RU form factor. Demonstrating exceptional versatility, it is capable to asymmetrically allocate its total power of 600 watts across all channels, adapting dynamically to drive loudspeakers with different power needs. Additionally, both Hi-Z and Low-Z speaker lines can be handled as required. A sophisticated protection package ensures flawless, reliable operation, while an intelligent multi-speed fan can engage in extreme thermal environments.

V600:2 two-channel amplifier ­ With the same premium features and Dynacord technologies on board as the four-channel model, the V600:2 offers optimal installation flexibility. At just a single rack unit high and half a rack width wide, it offers a multitude of installation options wherever space is limited. The included brackets facilitate single or dual rack-mount options as well as unobtrusive installation wherever needed, such as under counters. Two amplifiers fit in a single rack unit when rack-mounted side by side, efficiently using space and doubling the channel count and output power.

Technical specifications
ELECTRICAL TOTAL RATED OUTPUT POWER 1 NUMBER OF CHANNELS RATED OUTPUT POWER 1 OUTPUT POWER:
MAXIMUM OUTPUT POWER PER CHANNEL (POWER SHARING)
AMPLIFIER NOMINAL GAIN (+6 DBU INPUT SENSITIVITY, LEVEL 0 DB) SIGNAL TO NOISE RATIO (A-WEIGHTED, REF. TO RATED OUTPUT POWER, LEVEL 0 DB) THD+N (1/8 RATED OUTPUT POWER, 1 KHZ)

V600:2
2 2 x 300 W

600 W 4 / 8 / 70 V / 100 V

V600:4
4 4 x 150 W

500 W / 600 W / 500 W / 600 W

4 / 8 / 70 V / 100 V

27.0 dB / 30.0 dB / 33.2 dB / 36.2 dB

24.0 dB / 27.0 dB / 33.2 dB / 36.2 dB

-100 dB / > 102 dB / > 101 dB / > 103 dB > -98 dB / > 100 dB / > 101 dB / > 103 dB < 0.1 %

CONNECTIVITY
TYPE
LOUDSPEAKER OUTPUT CONTROL PORT TYPE
GENERAL SIGNAL PROCESSING POWER REQUIREMENTS POWER CONSUMPTION:
IDLE MODE (ECORAIL WITH NO INPUT SIGNAL) CONSUMPTION AT 1/8 RATED OUTPUT POWER STANDBY MODE (APD ACTIVE)
PROTECTIONS

1 x 6-pin Euroblock, 3.81 mm, male, parallel 1x RJ45 (AES72-1E)

2 x 6-pin Euroblock, 3.81 mm, male, parallel 1x RJ45 (AES72-1E)

2 x 4-pin Euroblock, 5.08 mm, female

1 x 5-pin Euroblock, 3.81 mm, male

Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter 100 V to 240 V, 50 Hz to 60 Hz AC

< 12 W

< 20 W

115 W

< 1 W Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters,
inrush current limiters, mains over/under voltage protection

1. Test signal for max. output power according IHF-A-202 (Dynamic-Headroom, burst 1 kHz / 20 ms on / 480 ms off / low level -20 dB)

Visit for more info: dynacord.com

References

• Pro Audio | Dynacord

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>