JIUHU JH-ANC930PLUS Headphones User Manual
- September 18, 2024
- JIUHU
Table of Contents
JIUHU JH-ANC930PLUS Headphones
Function Instruction
- “+”:Volume up,next song
- Power on/off,Music play/pause
- “-“:Volume down.previous song
- Calling microphone
- LCD touch screen
- Communication pin
- 3.5mm AUX jack port
- Type-C charging port
- Charging indicator
- ANC button
Power on/off Instruction
Power on:
In power-off mode,press and hold the power button around 2 seconds with blue and red light flashing alternately until you hear voice”Power on”,then the headset enter pairing mode with the voice ”pairing”
Power off:
In power-on mode,press and hold the power button around 4 seconds,then the indicator will be off.
How To Pair
- After power on,the blue and red light will flash alternately,then it enter pairing mode;
- Turn on the bluetooth function of mobile or other device ,search the bluetooth pairing name“JH-ANC930PLUS” and connect,the voice”connected” will be heard after the successful connection,and the blue indicator will flash every 5 seconds.
Music Play Operation
Volume up:Short press the“ +” button
Volume down:Short press the “- ”button
Next song:Press and hold the “ +” button
Previous song:Press and hold the “ -” button
Music play/pause:Click the power button
Calling Operation
Answer call:Click the power button when call is coming;
End call:Click the power button when call is over;
Reject call:Press and hold the power button around 2 seconds;
Redial:Double click the power button to redial the last called number
Siri Function
Press and hold the power button around 1 second to activate Siri
Clear Pairing
In power-on mode,click the power button 4 times until blue and red indicator flashes alternately.
ANC Mode
The default mode is normal mode,click the ANC button,it enter ANC mode,click the ANC button again,it enters transparency mode.
Indicator Instruction
| Connect successfully | The blue indicator blinks every 5 seconds |
|---|---|
| Pairing status | The red and blue indicator blink alternately |
| Reset | The red and blue indicator blink alternately |
| Listen to music | The blue indicator blinks every 5 seconds |
| Charge fully | The indicator will be solid blue |
| ANCon | The indicator will be solid green |
| Poweroff | The red indicator will goes off |
| Charging | The indicator will be solid red |
AUX Mode
Connect the AUX cable to headset and mobile{or other device such as
Computer,iPad etc),then can play music.
Note : If turn on the headset.once insert the AUX cable to headset.the
headset be turned off automatically,must take out the AUX cable if need to
turn on the headset.
The ANC mode is not working if power-off mode
Charging
In Charging.the red light will be solid on;
Once charging finished.the blue light will be solid on.
Technical Parameter
| Bluetooth chipset | JL7018,V5.3 |
|---|---|
| Bluetooth distance | >10m |
| Frequency range | 2402–2480MHz |
| Input | DC5V,1A |
| Charging time | Around 2H |
| Charging port | Type-C |
| Battery capacity | 600 mAh |
| Speaker driver | Φ40mm,32Ω |
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a class B digital device,pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>