Mofa M9-MAX Wireless Microphone Instructions
- September 19, 2024
- Mofa
Table of Contents
Mofa M9-MAX Wireless Microphone
Specifications
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved
- Minimum Distance: 0cm between radiator and body
Product Introduction
Dear user, thank you for choosing to use our wireless lavaliermicrophone. This manual will provide you with clear usage guidelines to help you quickly get started and fully utilize the product’s functions. This product consists of three parts: microphone, receiver, and charging compartment. It can provide professional level recording and live streaming output, plug and play, without the need for an app, and can be used for online live streaming, video VLOG shooting, program interviews, interview recording, video teaching and other scenarios.
Microphone Button
Multi-function button
- Power on/off-
- Long press the multi-function button
- Noise reduction mode-
- Single-click the multi-function button
- Reverb mode-
- Double-click the multi-function button
- Silent mode-
- Three clicks of the multi-function button
Microphone indicator light
Indicator light:
Receiver Button
Mode key
- Single-click Camera mode & Phone mode
Charging compartment
Pairing indicator
- Camera mode – blue light is always on
- Phone mode – blue light is always on
Digital display screen
- Charging compartment power indicator
Usage method
- Take out the microphone and receiver, and press and hold the receiver power button for 3 seconds to turn on
- Mobile phone usage method
- Single-click the receiver mode key to switch to mobile pho Insert the side of the adapter printed with V For Mobile” into the tl phone and insert the other side into the charging port of the r can be used when the connection light is on.
- Camera usage method
- Attach the clip to the receiver and then insert it into the camera’s hot shoe/cold shoe interface. *Connect the receiver’s TYPE-C port to the camera’s MIC audio input interface via a Type-c to 3.5mm TRS cable.
- Single click the receiver mode key to switch to camera mode, set the camera recording volume to the minimum, and then can be used when the connection light is on.
Phone charging
It can charge the phone through the receiver’s interface when shooting short videos or live broadcasts.
FAQs
Why can’t I record normally after connecting to my phone?
Please check if the connection indicator lights of the microphone and receiver are always on Please check if the microphone battery is sufficient. If the battery is low, please charge it promptly Some Xiaomi and Huawei phones need to update their phone versions (Settings > My Device > Version > Check for updates). *Some brands of mobile phones, such as VIVO, OPPO, Realme, Oneplus, 1Q00, etc., require the OTG “function to be turned on and external recording devices to be turned on
- Step 1: Open the “OTG” process: Phone settings > Other settings > OTG > Open or search for “OTG” in the search box in the settings and open it)
- Step 2: Open the external device process: Settings > Sound and Vibration > More Sound Settings > Default Recording Device > External Device
Can’t the microphone record for the camera app that comes with the device?
- Some brands of mobile phones have strict restrictions on the system, which prevent the microphone from obtaining audio permissions, not due to the quality of the microphone. If this situation occurs, please contact the brand phone manufacturer.
- This product is compatible with the vast majority of apps on the market. Please try using other apps instead.
Is there noise in the recorded sound?
- Check if the microphone is in noise reduction mode (the second indicator light is always on). Click the multifunction button to turn on noise reduction.
Is the recorded sound too low?
- Please shorten the distance between the microphone and the sound source reasonably to avoid breaking the sound.
- Please click the microphone volume button on the receiving end to increase the volume.
- Some brands of mobile phones, such as VIVO, OPPO, Realme, Oneplus, IQOO, etc., require the “OTG” function to be turned on and external recording devices to be turned on (please follow the first step of the FAQ).
What should I do if there is wind noise?
- If you purchased a model equipped with a windshield, please install the windshield on the microphone.
What should I do if the connected phone has a low battery during recording?
- Please connect the charging cable to the charging port on the receiving end to charge the phone.
What if there is an echo?
- Check if the microphone has the reverb function turned on (the third indicator light is on). Double-click the multifunction button to turn off reverb.
- Enter the song request interface in the live broadcast room and set it to the original sound in the tuning section.
What if there is an echo during the live broadcast?
- Please turn off the sound on your phone while watching the live broadcast, otherwise, there will be echoes (phones in the same space cannot have sound while watching the live broadcast).
Product parameters
- Wireless transmission: 2.4GHz
- Sound delay: <20ms
- Frequency response: 20Hz-20KHz
- Sensitivity: -35dB
- Signal-to-noise ratio: -65dB
- Transmission distance: 20m (turning) – 40m (visible)
- Microphone: 360-degree omnidirectional
- Range: Microphone: 6H
- Paired with charging compartment: 23H
- Battery capacity: Microphone: 110mAh
- Charging compartment: 600mAh
- Input voltage: DC4.5-5.2V
- Adapter: 5V/1A
- Weight: Microphone: 9g
- Receiver: 11g
- Charging case: 78g
- Size: Microphone: 24*10.3mm
- Receiver: 3622.816.3mm
- Charging compartment: 7432.741mmm
Safety precautions
- The product contains strong magnetism. To avoid magnetization effects, please stay away from easily interfering devices such as magnetic cards, IC cards, implanted medical devices (such as pacemakers), hard drives, RAM chips, etc.
- It is strictly prohibited to let the product come into contact with any liquid, and do not immerse the product in water or wet it. Do not use the product in rainy or damp environments. After contact with water inside the product, corrosion reactions may occur, leading to battery self ignition or even explosion.
- If the product catches fire, please immediately use water, water mist, sand, fire blanket powder, and carbon dioxide fire extinguishers to extinguish the fire. Please choose the fire extinguishing method in the order recommended above based on the actual situation.
- Please use the product in an environment between -10°C and 45°C, with a charging environment temperature of 5°C to 45°C.
- It is prohibited to disassemble the product in any way. If the battery is punctured during disassembly, it will lead to electrolyte leakage inside the battery, and even cause a fire or explosion.
- Mechanical impact, rolling or throwing of products is prohibited. Do not place heavy objects on the product.
- Do not place the product in the accessories or inside of heating equipment, cooking equipment, high-pressure containers, etc. (such as microwaves, battery ovens, electric ovens, electric heaters, high-pressure cookers, water heaters, gas stoves, etc.) to prevent the battery from overheating and exploding.
- It is prohibited to place products near heat sources (such as stoves or heaters) or in cars on hot days. Do not store the product in an environment exceeding 60°C.
- Do not store the battery for a long time after fully discharging it, to avoid damage to the battery cell caused by excessive discharge, and it will not be able to be used again.
- The charging compartment, data cable, and battery of the original matching model must be used.
- Using noncertified or nonmatching charging compartment data cables or batteries may cause electric shock, fire, explosion, or other hazards.
Attention:
Due to product version upgrades or other reasons, this manual may be updated from time to time. Unless otherwise agreed, this document is only intended as a guide for use. All statements, information, and suggestions in this document do not constitute any express or implied warranties
FCC
FCC Warning:
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your bodY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>