nVent HOFFMAN AGLK2 Grounding Kit Instruction Manual
- June 12, 2024
- nVent HOFFMAN
Table of Contents
AGLK2 Grounding Kit
Instruction Manual
Grounding Kit
NOTE: Only use this ground kit where the use of this component is specified.
- Drill 7/32 inch diameter hole in the bottom end of enclosure.
- Remove paint where the ground connector will contact the enclosure to insure electrical continuity.
- Install the ground connector and connect ground wire as shown.
- Attach ground label adjacent to connector as shown.
- If this enclosure has provisions for installing a panel, install the lockwasher included in the enclosure under one of the screws securing the panel. This will insure grounding between the panel and the enclosure.
Rev. C
© 2019 Hoffman Enclosures Inc.
PH 763 422 2211
nVent.com/HOFFMAN
P/N 79208001
87568259
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>