Hawkeye 99DB 5.8G Sharp Vision 2 FPV Monitor User Manual
- September 19, 2024
- hawkeye
Table of Contents
99DB 5.8G Sharp Vision 2 FPV Monitor
“`html
Specifications:
- Model: Hawkeye Litle Pilot Sharp Vision 2
- Screen Size: 7 inches
- Brightness: 1000LUX
- Features: FPV Monitor, DVR, HDMI
Product Information:
Features:
The Hawkeye Litle Pilot Sharp Vision 2 is a versatile FPV
monitor with a built-in DVR and HDMI functionality. It offers a
7-inch display with a high brightness level of 1000LUX, providing
clear and sharp visuals for an immersive experience.
Button Functions:
The monitor includes various control buttons for managing DVR
functions, display settings, and FPV interfaces. These buttons
allow users to customize their viewing experience and access
different features easily.
DVR Interface Descriptions:
The DVR interface enables users to playback recorded videos and
adjust recording settings as needed. It provides flexibility in
managing video recordings and ensuring that important footage is
captured effectively.
Product Usage Instructions:
1. Display Control:
Use the display control buttons to adjust settings such as
brightness, contrast, saturation, sharpness, and more to optimize
the visual quality according to your preferences.
2. DVR Functionality:
Utilize the DVR control buttons to record videos, playback
recorded footage, and adjust recording settings to capture
important moments during FPV flights or other activities.
3. Interface Connections:
Connect external video sources through the external video input
interface or HDMI interface for expanded compatibility and viewing
options. Ensure proper connections for seamless integration.
4. Settings Adjustment:
Access the display interface settings to configure parameters
such as frequency group selection, format, language, zoom, volume
adjustment, LED settings, and more for a personalized user
experience.
FAQ:
Q: How do I reset the monitor?
A: To reset the monitor, locate and press the reset button in
the settings menu. This will restore the monitor to its default
settings.
Q: Can I adjust the brightness of the display?
A: Yes, you can adjust the brightness, contrast, saturation, and
other display settings using the control buttons provided on the
monitor.
“`
Explore a new world!
www.cnfpv.com
Hawkeye Litle Pilot Sharp Vision 2
7 inch 1000LUX FPV Monitor, DVR, HDMI
User Manual
1
Explore a new world!
www.cnfpv.com
Specifications and Features: ……………………………………………………………………14
Features: ………………………………………………………………………………………………14
Button Functions: …………………………………………………………………………………..15
DVR Control Buttons: ……………………………………………………………………………..15
Display Control Buttons: ………………………………………………………………………….15
FPV Interface Descriptions …………………………………………………………………16
DVR Interface: ………………………………………………………………………………….16
External video input Interface:……………………………………………………………..16
HDMI Interface: …………………………………………………………………………………16
Display Interface Setting:…………………………………………………………………………16
Frequency Group Selection:………………………………………………………………17
FORMAT: ……………………………………………………………………………………….. 17
Brightness: ……………………………………………………………………………………..17
Contrast: ………………………………………………………………………………………… 17
Saturation: ………………………………………………………………………………………17
Sharp: ……………………………………………………………………………………………. 18
Latitude: …………………………………………………………………………………………18
SPEAKER: ……………………………………………………………………………………..18
Black light: ………………………………………………………………………………………18
ZOOM: …………………………………………………………………………………………..18
VOLADJ: ………………………………………………………………………………………..18
LED: ………………………………………………………………………………………………18
Language: ………………………………………………………………………………………18
Reset: …………………………………………………………………………………………….18
DVR Interface Descriptions: …………………………………………………………………….18
Video Playback………………………………………………………………………………..18
Recording Settings: ………………………………………………………………………….19
Resolution: ……………………………………………………………………………………..19
Cycle Recording: ……………………………………………………………………………..19
Motion Detection: …………………………………………………………………………….19
Motion Detection Sensitivity: ……………………………………………………………..19
Date Stamp: ……………………………………………………………………………………20
Audio Acquisition: …………………………………………………………………………….20
Image Quality: …………………………………………………………………………………20
Auto power up recording: ………………………………………………………………….20
Advanced Settings: ………………………………………………………………………………..20
Format: …………………………………………………………………………………………..21
Date/Time: ………………………………………………………………………………………21
Language: ………………………………………………………………………………………21
TV Mode:………………………………………………………………………………………..21
2
Explore a new world!
www.cnfpv.com
Default Settings: ………………………………………………………………………………21
Quick Access Descriptions: ……………………………………………………………………..22
Interface Switch:………………………………………………………………………………22
Show/Hide Indication Windows: …………………………………………………………22
Show Help Menu: …………………………………………………………………………….22
Packing and Accessories:………………………………………………………………………..22
Size and Weight: ……………………………………………………………………………..22
Accessories: ……………………………………………………………………………………22
FAQ: …………………………………………………………………………………………………….23
Not able to search channels automatically: ………………………………………….23
The video displayed is black-and-white:………………………………………………23
Can not start after connected to power: ………………………………………………23
No channel can be received: ……………………………………………………………..23
3
Explore a new world!
Specifications and Features:
www.cnfpv.com
LED Screen
Power Supply Input Output DVR
Specification
Matching antenna interface
Display resolution Backlight Brightness
Aspect ratio Response time Color system Working voltage
Current
Signal Signal Resolution TF card supported
Packing size
Monitor size Gross weight 5.8G Sensitivity
interface
1024×600 LED
1000 Lux 43 10ms
PAL/NTSC DC3S-6S battery
820MA @3S410MA @6S
VideoPAL/NTSCHDMI Video
D1/VGA/QVGA Max 64G
205mm×130mm×105mm
183mm×122mm×30mm 0.58kg -99dB
SMA
4
Explore a new world!
www.cnfpv.com
Features:
Specially designed for aerial photography system, Sharp Vision all-in-one
monitor has the following features: High brightness: 1000 Lux. Dual receiver: built-in dual receivers. DVR : integrated DVR black box can run in the background for recording. No delay/anti blue screen/anti black screen: the built-in DVR system won’t
cause any delay in receiving signal; blue screen or black screen will definitely not
occur. Auto/manual channel scan: no need for DIP switch. HDMI input.
Button Functions:
At the back of the monitor, there are 2 groups of buttons, one for DVR control
and the other for display control.
DVR Control Buttons:
Functions
UP
Move cursor up
DOWN
Move cursor down
MENU (left button)
Po pup/exit menu/sub menu
MODE (right button)
OK
Enter/exit video playback mode
Confirm selection /play/stop
Display Control Buttons: Functions
UP
Move cursor up
Shortcut key
Hiding OSD/ Press 2 seconds for Auto channel search in FPV
DOWN Move cursor down
Popping up HELP menu
LEFT/ Right/+
OK
Adjustment key(-) Popping up former interface Adjustment key(+) Popping up
next interface
Po pup menu/confirm selections
5
Explore a new world!
www.cnfpv.com
Note: Four display resource types of this monitor are: FPV interface, DVR interface ,
External video input interface and HDMI interface.Use LETF key(shortcut key )
to switch the interface.
FPV Interface Descriptions
FPV interface is the default boot interface.
Voltage Time
RSSI/Channel in use
11.5 00:30 25 20 1
Voltage indicator: input voltage value is displayed; Display from 10V to 26 V.
When the battery is low, the menu turns red and starts flashing. When the
battery is too low, the blue light flashes faster and faster in the lower left
corner and the buzzer alarms. Please replace the battery immediately to avoid
damage to the battery. Recording indicator: a red “R” flashes when DVR is
working in the background. Time indicator: monitor running time is displayed.
Signal strength indicator: the strength of both the signals received by ANT1
and
ANT2 is displayed.
DVR Interface :
11.5 00:30 DVR
6
Explore a new world!
External video input Interface:
11.5 00:30 AV3
www.cnfpv.com
HDMI Interface:
11.5 00:30
HDMI
HDMI input :480i/p, 576i/p, 720p, 1080i/p.
Display Interface Setting:
Press OK button to po pup menu setting:
FRQA
SCAN
FRQB A1 5645
FRQADJ
OFF
FORMAT AUTO
BRI
20
CON
20
SAT
20
SHARP
07
GAMA
C0
SPEAKER ON
LIGHT
20
ZOOM
16:9
VOLADJ +0.0V
LAN
EN
RESET
EXIT
7
Explore a new world!
www.cnfpv.com
Frequency Group Selection: 1.1 You can manually select the desired frequency from 12 groups: A, B, E,F,R ,L,J,X,U,l,K and Z or select SCAN option to start auto search. Dual 5.8G receivers cover 96 channels:
Note: Currently, only data between 4.867G and 6.10 0G is supported
1.2 You can manually input the frequency, The specific operation steps are as follows:
FRQA FRQB FRQADJ FORMAT BRI CON SAT SHARP GAMA SPEAKER LIGHT ZOOM VOLADJ LAN RESET EXIT
INPUT 5645 OFF AUTO 20 20 20 07 C0 20 20 16:9 +0.0V EN
BETWEEN 4867 AND 6100
Firstly, select ” INPUT ” in the FRQA option, then select the FRQB option, and
confirm with “OK” to enter the frequency point input mode.
if the current displayed frequency is 5645 and you are preparing to change it
to 5665, you can use the buttons “OK”, “UP”, and “DOWM” to select the desired
frequency. Press “OK” to select the frequency position, and press “UP” and
“DOWM” to select the desired value. After all inputs are completed, press “OK”
to confirm.
8
Explore a new world!
www.cnfpv.com
Note: Currently, only frequencies between 4.867G and 6.100G are supported. If not
within this range, the prompt bar will turn red and the setting will not be successful.
Please re-enter.
Frequency fine-tuning:
FRQ 5635 5637 5639 5641 5643 5645 5647 5649 5651 5653 5655
RSSI 03 03 03 03 03 90 95 03 50 30 03
Control buttons: LEFT (-), RIGHT (+).RangeAt this time, the frequency points
that are similar to the current frequency are displayed. According to the
signal strength, you can use the up and down keys to select, and the menu key
to confirm the selection.
FORMAT: Press LEFT or RIGHT button to enter system setting, 3 options are
provided:
AUTO/ PAL/NTSC. If AUTO selected, the input video system will be automatically
identified. System setting will cause display failure.
Brightness: Control buttons: LEFT (-), RIGHT (+).Range: 1-40.
Contrast: Control buttons: LEFT (-), RIGHT (+).Range: 1-40.
Saturation: Control buttons: LEFT (-), RIGHT (+).Range: 1-40.
Sharp: Control buttons: LEFT (-), RIGHT (+).Range: 1-15.
Latitude: Control buttons: LEFT (-), RIGHT (+).Range: C1-C3.
SPEAKER: Adjust the SPEAKER, ON/ OFF.
Black light: Adjust LED light brightness, Auto, High, Low.
9
Explore a new world!
ZOOM: Press LEFT or RIGHT button to enter system setting, 16:9 / 4:3
VOLADJ: Control buttons: LEFT (-), RIGHT (+).Range: -0.5 to +0.5
LED: Adjust the power indicator light, ON/ OFF.
Language: Control buttons: LEFT (-), RIGHT (+).Options: Chinese/English.
www.cnfpv.com
Reset: Reset values to default.
DVR Interface Descriptions:
NotePlease back up your data in TF card; when the TF card is used for the first time, it will be auto formated .
Pressing RIGHT button can switch FPV interface to DVR interface and pressing
LEFT button can switch back to FPV interface.
Video Playback First, switch to the DVR interface, pressing MODE (RIGHT)
button can start video
playback. Press UP or DOWN button to select a desired file, then press OK
button to start playing it.
UP DOWN
MENU (LEFT)
MODE (RIGHT)
OK
Functions Move cursor up Move cursor down
Po pup/exit menu/sub menu
Enter/exit video playback mode
Confirm selection /play/stop
DVR can run front-end or back-end. In any interface except DVR setting and
video playback mode, pressing OK button (middle one of DVR control group) can
start
recording in the background, without affecting FPV use. Recording Settings:
Press MENU button to select sub menu:
10
Explore a new world!
www.cnfpv.com
Resolution: D1(720×576PAL720×480NTSC),VGA(640×480) QVGA320×240.
Cycle Recording: If Cycle Recording is selected, the latest videos recorded
will cover the
earliest ones when the TF card is full. “OFF”: if Cycle Recording function is
closed, video files will not be cut into
small segments; If you select 3 min to 10 min, Cycle Recording function is
open then; the
length of each video segment is corresponding to the selected value.
Motion Detection: If Motion Detection is selected, the DVR will automatically
start recording
according to its internal algorithm when any motion is detected.
11
Explore a new world!
www.cnfpv.com
Motion Detection Sensitivity: Motion Detection Sensitivity can be adjusted by
3 levels: High/Medium/Low;
the higher level is selected, the more easily the DVR is triggered to record.
Date Stamp: Select ON/OFF to decide whether date and time will be showed at
the
bottom of the video images.
Audio Acquisition: Select ON/Off to decide whether sounds can be recorded
real-time into video
files.
12
Explore a new world!
www.cnfpv.com
Image Quality: Image definition and video file size can be adjusted by 3
levels. Higher image
quality results in higher image definition and larger video file; When
resolution D1(720×576PAL) is selected, the file sizes of videos
recorded at different Image Quality options are as follows: Best: 1.7G/h Good:
1.2G/h Standard: 800M/h
Auto power up recording: Select YES/ON to decide whether videos need to be
auto recorded when
power up.
Advanced Settings:
Press the MENU button twice will pop up the Advanced Setting options including
Format, Date/Time and Language.
Format: Enter Advanced Settings, and select Format option to format the TF
card. In
order to optimize the file system ,DVR will format the TF card, if it’s used
for the first time; Please back up your data in TF Card.
Note: all files stored in the TF card will be deleted after the card is
formatted.
13
Explore a new world!
www.cnfpv.com
Date/Time: Enter Advanced Settings select Date/Time option press UP/DOWN
button to select a desired date/time press MENU button to exit.
Language: Enter Advanced Settings select Language option press UP/DOWN button
to select a desired language from 8 languages provided press MENU button to
exit.
TV Mode: Video output system can be selected and video input system will be
automatically
identified. Select the system according to which country you are in.Keep it in
PAL, do not change
14
Explore a new world!
www.cnfpv.com
Default Settings: This option leads back to factory default settings.
Quick Access Descriptions:
In any mode except menu setting, Monitor keys can be used as shortcuts
described as follows:
Interface Switch: Pressing RIGHT/LEFT button can switch between FPV, DVR,
external video
interfaces and HDMI interfaces.
Show/Hide Indication Windows: In any interface, pressing UP button (of the
display control group) once can hide
the indication windows, and pressing UP again can show them again.
Show Help Menu: In any interface, pressing DOWN button (of the display control
group) can show
Help menu, pressing DOWN again can make it disappear.
The power indicator light: When the system starts, if the power indicator is
on, it indicates that the power is
on. In any of the FPV, DVR and external video interfaces When recording, the
LED
will flash. When the battery is too low and the system alarms, the LED will
flash.
15
Explore a new world!
www.cnfpv.com
Packing and Accessories
Size and Weight: Specification
Packing size
Gross weightdual receiver + DVR
205mm×130mm×105mm 0.58kg
Accessories: Accessories
3.5mm connector cable
1
5.8G antenna
2
Bandage
2
3.5mm cable Interface descriptions
Yellow White Red
Video output Video input Audio output
FAQ:
Not able to search channels automatically: Auto channel scan only functions in
the FPV interface. In the DVR interface, users should search channels
manually.
The video displayed is black-and-white: Check whether the camera output is
black-and-white (some cameras might automatically shift to black-and-white in
low-light conditions)
Can not start after connected to power: First fully charge the battery, and
make sure its discharge current at least reaches 1.4A. Check whether the
battery power is enough. Check whether the power source is correctly connected
to positive
No channel can be received: Install antennas, and move the monitor close to
the 5.8 GHz transmitter. Connect video signal to the transmitter. Check
whether the channel provided by the transmitter is one of those listed in the
channels-able-to-be-received-table; check with other channels.
16
Explore a new world!
www.cnfpv.com
NOTE:
Check on www.CNfpv.com for new firmware/Manual updates.
For more information please check our
Youtube/Facebook/Instagram channel:
HawkeyeFPV
Youtube
17
Explore a new world!
Instagram
www.cnfpv.com
18
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>