FROGTAPE CP 250 Medium High Adhesion Masking Tape Instructions
- September 18, 2024
- FROGTAPE
Table of Contents
FROGTAPE CP 250 Medium High Adhesion Masking Tape
Specifications
- Construction: Fine Structured Crepe
- Adhesive: Rubber-based adhesive
- Standard Widths: 0.47 in; 0.70 in; 0.94 in; 1.41 in; 1.88 in; 2.83 in (12 mm; 18 mm; 24 mm; 36 mm; 48 mm; 72 mm)
- Standard Length: 60 yds (55 m)
- Standard Core Size: 3 in
- Applicable Standards: ASTM D 6123/D 6123M-97 (2012), Type I
- Color: Light Blue (LBL)
- Physical Properties:
- Adhesion to Stainless Steel: Standard – 32.5 oz/in width,Metric – 3.56 N/10 mm
- Elongation: 10%
- Service Temperature Range: 40 F to 250 F (up to 30 minutes) / 4 C to 121 C (up to 30 minutes)
- Tensile Strength: Standard – 24 lbs/in width, Metric – 42 N/10mm
- Thickness: 6.2 mils / 0.16 mm
Product Usage Instructions
Storage and Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away
from direct sunlight and should be used within 12 months of the date of
shipment. Surfaces to which the tape is applied should be clean, dry, and free
of grease, oil, or other contaminants.
Application
- Clean the surface where the tape will be applied thoroughly to ensure proper adhesion.
- Cut the tape to the desired length using appropriate tools.
- Apply the tape evenly and firmly onto the surface, ensuring there are no air bubbles trapped underneath.
- Press down on the tape to secure it in place.
Removal
To remove the tape, gently peel it off the surface, taking care not to
damage the underlying material.
FAQ
-
Q: Can this tape be used for outdoor applications?
A: While the tape is designed for moderate temperature applications, it is not recommended for prolonged outdoor use as exposure to elements may affect its performance. -
Q: Is this tape suitable for use on painted surfaces?
A: Yes, this tape is suitable for use on painted surfaces, but it is recommended to test a small area first to ensure compatibility and ease of removal.
CP 250
FROGTAPE® 250 LIGHT BLUE PERFORMANCE GRADE MODERATE TEMPERATURE, MEDIUM- HIGH ADHESION MASKING TAPE
TYPICAL APPLICATIONS
- For moderate temperature, demanding paint masking applications in the transportation (auto, coaches, buses and marine) and metal fabrication industries
- Also used for wet sanding applications
PRODUCT FEATURES
- Excellent adhesion to metal, rubber, plastic, anodized aluminum, chrome and fiberglass
- Resistant to water, salt water, various solvents and abrasives
- Compatible with gel coats, multi-part epoxy topcoats, and antifouling bottom paints for marine applications, as well as solvent based and waterborne, aqueous paints and coatings for automotive
- Resistant to water, various solvents and gel coats
- Residue-free removal
- Temperature-resistant up to 250 F (for up to 30 minutes)
- Remove tape at room temperature (70 F +/- 10 F) after baking
CONSTRUCTION
- Backing: Fine Structured Crepe
- Adhesive: Rubber-based adhesive
STANDARD WIDTHS
- 0.47 in; 0.70 in; 0.94 in; 1.41 in; 1.88 in; 2.83 in
- 12 mm; 18 mm; 24 mm; 36 mm; 48 mm; 72 mm
STANDARD LENGTH
- 60 yds
- 55 m
Lead times may apply. Please contact Shurtape customer service for information related to stock and non-stock sizes and colors.
STANDARD CORE SIZE
3 in
APPLICABLE STANDARDS
ASTM D 6123/D 6123M-97 (2012), Type I
STORAGE & USAGE CONDITIONS
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
COLOR
PHYSICAL PROPERTIES STANDARD METRIC
- Adhesion to Stainless Steel 32.5 oz/in width 3.56 N/10 mm
- Elongation 10% 10%
- Service Temperature Range 40 F to 250 F (up to 30 minutes) 4 C to 121 C (up to 30 minutes)
- Tensile 24 lbs/in width 42 N/10mm
- Thickness 6.2 mils 0.16 mm
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
*DOES NOT contain PaintBlock® Technology.
Shurtape Technologies, LLC | PO BOX 1530 Hickory, NC 28603-1530 USA | Phone
1.888.442.TAPE (8273) | Fax 800.335.7651 |
shurtapetech.com ISO 9001 CERTIFIED QUALITY SYSTEM
Shurtape is a registered trademark of Shurtape Technologies, LLC Form# TDS-
CP-250-20240829