ontrac SV12JN Headphones CNC Black Nickel User Manual
- September 18, 2024
- ontrac
Table of Contents
SV12JN Headphones CNC Black Nickel
“`html
Product Specifications:
-
Model: SV12 JN.00000 PN.000000-00-00
-
Version: 01
-
Battery Life: Up to 55 hours
-
Charging Time: 10-minute charge delivers 2.5 hours, 30-minute
charge delivers 9 hours -
Connectivity: USB-C
-
Active Noise Cancellation
Product Usage Instructions:
Turning on and Pairing:
To turn on the headphones, press and hold the Power button for
two seconds until the LED light turns white. For pairing, use the
MyDysonTM app following the on-screen instructions to create a new
account or add the machine if you already have an account.
Battery and LED Behavior:
The LED indicator on the left ear cup will show different
colors:
- Green: Battery is more than 10% charged
- Flashing Amber: Low battery (under 10% charged)
- Pulsing Amber: Charging in progress
- Green (fading to off): Fully charged
Controlling Audio:
Use the intuitive joystick on the headphones for audio control.
Double-tap either ear cup to switch between active noise
cancellation modes. The headphones feature Autopause/Play function
that automatically pauses audio when removed and resumes when
worn.
Cleaning:
To clean your Dyson OnTracTM headphones, use a soft, dry cloth
to wipe down the surfaces. Avoid using liquids or harsh chemicals
to prevent damage.
FAQ:
Q: How do I adjust the headband for a comfortable fit?
A: Put your headphones on and slide both sides of the headband
to adjust until you have a comfortable fit.
Q: How long does it take to charge the headphones?
A: A 10-minute charge delivers 2.5 hours of battery, and a
30-minute charge delivers 9 hours.
“`
SV12 JN.00000 PN.000000-00-00 00.00.00 VERSION NO.01
User manual
Contents In the box Download the MyDysonTMapp Get to know your headphones Turning on and pairing your headphones Battery and LED behaviour
Controlling audio Active noise cancellation In-flight adaptor Configuring your headphones Cleaning your Dyson OnTracTM headphones
In the box
Some accessories may not be included. You can buy additional accessories at
www.dyson.co.uk
Dyson OnTracTMnoise-cancelling headphones
OnTracTMSlimline case
Download the MyDysonTM app
An essential part of your experience, the MyDysonTMapp lets you control your
Dyson OnTracTM noise-cancelling headphones wherever you are. If you haven’t
already, download the app now for extra features and the latest updates.
Download the MyDysonTMapp from the App Store or Google Play. Open the app and
follow the on-screen instructions to create a new account.
USB-C cable
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.
Get to know your headphones
Active noise cancellation To switch between modes, double tap either ear cup.
Autopause/Play Your headphones will automatically pause your audio when you
take them off, and automatically play your audio when you put them back on.
Adjust your headphones Put your headphones on. Adjust the headband, sliding both sides until you have a comfortable fit.
Download the MyDysonTMapp See sound and air quality reports for your location,
in real time. And adjust EQ modes to optimise your listening.
Power button Turn your headphones on and off, and connect to a Bluetooth®
wireless technology device. Hold for two seconds to turn on or off, and five
seconds to pair.
Battery-saving head detect After 30 minutes of inactivity your headphones will
automatically turn off to save battery. To turn them back on, hold the power
button down for 2 seconds.
Joystick Lets you control music, adjust volume and access your voice assistant
on the back of your right ear cup.
Ergonomic ear cup Angled at minus 13° and oval-shaped to sit over the ear.
USB-C charger Charge your headphones using the USB-C Cable.
Turning on and pairing your headphones
Pairing your headphones is easiest with the MyDysonTM app. Connecting to the
MyDysonTMapp Download the MyDysonTMapp from the App Store or Google Play. Open
the app and follow the on-screen instructions to create a new account. If you
already have an account, select Add machine’ and follow the instructions. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc. Press and hold the Power button After two seconds, the LED light will turn white to show that your headphones are on. Connect using Bluetooth® wireless technology1 Press and hold the Power button for five seconds. The LED will flash blue when in pairing mode. Note: Before flashing blue, the LED will flash white and you will hear an off tone, continue holding the Power button through this. Open Bluetooth® in your mobile device’s settings menu. Check that Bluetooth® is turned on and selectAudio
OnTrac’ to connect to your headphones. Your MyDysonTMapp will alert you when
pairing is complete.
1. The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Dyson is under license.
Battery and LED behaviour
Battery life Up to 55 hours of listening, even with ANC switched on. And if
you’re running low, a 10-minute charge delivers 2.5 hours of battery, and a
30-minute charge delivers 9 hours.
LED Locate the charge indicator at the front centre of the left ear cup.
Battery
Battery is more than 10% charged The LED will turn green.
Low battery If the battery is under 10% charged, the LED will flash amber for
5 seconds. Auto power off When the product turns off after 30 minutes of
inactivity, you will see a white LED. Charging When connected to a power
supply and charging, the LED will pulse amber. When fully charged the LED will
turn green and then fade to off.
Bluetooth® wireless technology1
Bluetooth® in discoverable mode1 Blue LED continuous pulse.
Bluetooth® successfully connected1 Blue LED continuous pulse ends. Audio
welcome tone.
Alerts
Seek Dyson support Red LED flash for 5 seconds
Update installing White LED pulsed flashing
1. The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Dyson is under license.
Controlling audio
To play audio through your headphones, you’ll need to either connect them
using Bluetooth® or the in-flight adaptor cable. Use the intuitive joystick
Control your audio using the MyDysonTMapp or the joystick on the back of your
right ear cup. Play and pause Press the middle of the joystick to play. Press
it again to pause.
Intuitive joystick
Skip and seek Tap the joystick on the left or right to skip tracks. Press and
hold to fast forward or rewind.
Volume Push the joystick up or down to adjust the volume.
Activating voice assistant Press and hold the middle of the joystick for two
seconds to activate the voice control on your mobile device.
Answering phone calls To accept an incoming call, press the joystick. To
decline a call, press and hold the joystick. To end a call, press the
joystick.
Active noise cancellation
Use Active noise cancellation (ANC) to reduce the background noise around you.
You can double tap either outer cap to switch between noise cancelling modes.
Isolation mode The maximum level of ANC, reducing surrounding background
noise. This is the default setting for your headphones.
Transparency mode To hear the environment around you.
In-flight adaptor
(available separately)
Connect the In-flight cable to the 2-pin adaptor, then plug into the plane’s
entertainment system via the audio port. The In-flight adaptor will only
charge your Dyson OnTracTM noise-cancelling headphones when the USB-C cable is
also used. Please note that the audio controls on your Dyson OnTracTM noise-
cancelling headphones will not function when the In-flight adaptor is in use.
Warning
The In-flight 2-pin adaptor is for connection to an audio outlet only.
Plugging in to a mains socket outlet may result in a fire or pose a risk of an
electric shock.
Configuring your headphones
Adjusting the headband To adjust the headband, grip and slide it into place
for a comfortable fit.
Replacing the outer caps To remove an outer cap, twist the outermost circular
part anti-clockwise. Align the replacement outer cap on the headphones and
twist clockwise until it clicks.
Replacing the ear cushions To remove an ear cushion, twist it anti-clockwise.
Select the correct replacement for the left or right ear. These are marked
with an L and an R on both the headset and the ear cushions themselves. Line
up the long and short slots on the ear cushions with the matching ridges on
the headset. Push down and twist clockwise, until it clicks into place. Make
sure the ear cushion is flush to the headphones to ensure proper
functionality. When you replace the ear cushions, we recommend you go to the
Product settings section of the MyDysonTMapp and recalibrate your headphones.
You’ll find this under Replacing accessories.
Cleaning your Dyson OnTracTM headphones
Outer caps Wipe away dust or debris from the perforations in the ear cup
covers with a soft, damp, lint-free cloth.
Ear cushions and headband Wipe away dust or debris with a soft, damp, lint-
free cloth.