AmpliFi AFi-ALN Router User Guide

: September 26, 2024
: amplifi

Table of Contents

AFi-ALN Router
Specifications:
Product Usage Instructions:
Installation:
- App Users:
- Non-App Users:
App Features:
Resetting to Factory Defaults:
- FAQ:
Q: How do I access live chat support?
Q: How can I enable remote access?
Q: What should I do if I forget my administration

AFi-ALN Router

“`html

Specifications:

Package Contents:
- Router
- Ethernet Cable
- Power Cable
Hardware Overview:
- Touchscreen Display: The front features a touchscreen
  display.
- Adjustable LED: The bottom features an adjustable LED.
- Ethernet Ports: (4) Gigabit Ethernet ports available.
- WAN Port: Connects to the broadband modem.
- Power Port: For the Power Cable connection.

Product Usage Instructions:

Installation:

The AmpliFi Router can be installed using one of the following
methods:

App Users:

Download and open the AmpliFi app on your iPhone or Android
device.
Follow the on-screen instructions to configure your AmpliFi
Router.

Non-App Users:

Connect to the default AmpliFi wireless network (SSID) from a
computer or tablet.
Follow the on-screen setup instructions to configure your
router.
Connect to the new wireless network that you’ve created.

App Features:

The AmpliFi app provides various features:

System Window: Overview of the Wi-Fi system, network status,
connected clients, and speeds.
Performance Test: Run speed tests for download/upload speeds
and connection ping time.
Guest Access: Provide guest access with a time limit and view
connected users.
Family Profiles: Create profiles, assign devices, schedule
quiet time, and pause internet access.
Diagnose: Check WAN link, IP settings, internet connection, and
MeshPoint status.

Resetting to Factory Defaults:

If the administration password is lost, factory default settings
can be restored:

Router Reset: Use an object to press Reset on
the bottom of the AmpliFi Router for about 10 seconds until the LED
turns off.

FAQ:

Q: How do I access live chat support?

To access live chat support, tap the side menu icon at the upper
left of the app and then tap Live Support for 24/7 assistance.

Q: How can I enable remote access?

You can enable remote access by accessing the side menu and
enabling Remote Access from there.

Q: What should I do if I forget my administration

password?

If you forget your administration password, you can reset the
router to factory default settings by following the Router Reset
instructions provided in the manual.

“`

AFi-ALN-R Quick Start Guide
Package Contents

Router

Ethernet Cable

Hardware Overview

Power Cable

Touchscreen Display The front of the AmpliFi Router features a touchscreen display.
Adjustable LED The bottom of the AmpliFi Router features an adjustable LED that is fully lit by

default when the Router isAcFoi-nAfiLgNur-eRd QanudicrkeaSdtayrftoGr uusidee. The brightness settings of the touchscreen and LED are configurable using the AmpliFi app.
Ethernet Ports
(4) Gigabit Ethernet ports available to connect 10/100/1000 Mbps wired network device to the internet.
WAN Port
Connects to the broadband modem provided by your ISP (Internet Service Provider).
Power Port
The Power Cable connects to this port.
Installation
The AmpliFi Router can be installed using one of the following methods: App Users AmpliFi app for iPhone or AndroidTM Non-App Users Connect to default AmpliFi wireless network (SSID) from a computer or tablet.
App Users

AFi-ALN-R Quick Start Guide

6. 7. Follow the on-screen instructions to configure your AmpliFi Router.

AFi-ALN-R Quick Start Guide
Non-App Users

AFi-ALN-R Quick Start Guide

8. Connect to the new wireless network that you’ve created.
App Features

The system dAasFhi-bAoLaNrd-Ris QdiuspiclkaySetdarint GthueidSeystem window. It provides an overview of the AmpliFi Wi-Fi system including network status, number of connected clients, and active download/upload speeds. Tap devices to display/edit settings.
Tap Start Test on the Performance screen to run a speed test that will provide your download speed, upload speed, and connection ping time. Swipe left on the throughput section to view additional data. A history of recent tests is displayed at the bottom.
To provide guest access, determine the number of guests, select a time limit for their access, and tap Start. Guests simply connect to your wireless network named with the -guest label. No password is required. As guests connect, the number of users connected will be displayed in the app. Tap Stop at any time to turn off the guest network.
The Family Profiles feature allows you to create profiles for family members, groups, or areas of your home. Assign devices to the profile, schedule quiet time (when internet is not accessible), and pause the internet at any time.
The Diagnose option will check your WAN link, IP settings, internet connection, and MeshPoint status.
Side Menu – 24/7 Live Chat Support
Tap in the upper left of the app to access the side menu. Tap Live Support for 24/7 live chat support. Remote Access can also be enabled from this menu.

AFi-ALN-R Quick Start Guide
Resetting to Factory Defaults
If the AmpliFi Router administration password is lost, factory default settings can be restored.

AFi-ALN-R Quick Start Guide
Router Reset Use an object such as a straightened paper clip to press Reset located on the bottom of the AmpliFi Router for approximately 10 seconds until the LED turns off.
Safety Notices
1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Limited Warranty
ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

AFi-ALN-R Quick Start Guide

FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The AmpliFi Router has been approved by FCC under FCC ID: SWX-AFAR.
ISED Canada

CAN ICES-3(B)/NMB-3(B)
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired
operation of the device. The AmpliFi Router has been approved by ISED Canada under IC: 6545A-AFAR.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage;

2. sl’aupscpeapretiibl ldeodit’eanccceopmteprrotomuet tAbtrrFeouil- eiAllafLognNec-triRaodniQnoeéumleicecktnrtiqS. utearstuGbi,umidêeme si le brouillage est
Le AMPLIFI Router ont été approuvés par Industrie Canada en vertu IC : 6545A- AFAR. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 42 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
AVIS IMPORTANT :
Déclaration sur l’exposition aux rayonnements :
Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements dans un environnement non contrôlé. Lors de l’installation et de la mise en fonctionnement de l’équipement, assurez-vous qu’il y ait une distance minimale de 42 cm entre l’élément rayonnant et vous. Cet émetteur ne doit être installé à proximité d’aucune autre antenne ni d’aucun autre émetteur, et ne doit être utilisé conjointement à aucun autre de ces appareils.
Brazil
Nota: Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.
CE Marking
CE marking on this product represents the product is in compliance with all directives that are applicable to it.
Country List AT BE BG CY CZ DE DK EE EL ES FI FR HR HU IE IT LV LT LU MT NL PL PT RO SE SI SK UK
BFWA (Broadband Fixed Wireless Access) members noted in blue

Note: This device meeAtsFMi-aAxL. NTX-RpoQwuericlikmSit tpaerrtEGTuSiIdreegulations.
The following apply to products that operate in the 5 GHz frequency range: Note: This device is restricted to indoor use only when operating in the 5150 – 5350 MHz frequency range within all member states. Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member states. Other countries listed may use the 5.8 GHz frequency band.
WEEE Compliance Statement
Declaration of Conformity Online Resources
© 2024 Ubiquiti Inc. All rights reserved.