AFi-LR AmpliFi LR Home WiFi System User Guide
- June 13, 2024
- amplifi
Table of Contents
AFi-LR AmpliFi LR Home WiFi System User Guide
Introduction
Thank you for purchasing the AmpliFiTM LR Home Wi-Fi System. This Quick Start Guide is designed to guide you through installation and also includes warranty terms.
Package Contents
Hardware Overview
Router Front
Router Back
Mesh Point
Installation
The AmpliFi Router can be installed using one of the following methods:
- AmpliFi app for iPhone®
- AmpliFi app for AndroidTM
- Connecting to the default AmpliFi wireless network (SSID) from a computer or tablet.
App Users
Download and install the AmpliFi app from the App Store or Google PlayTM
Store.
If you are not using the app to install the AmpliFi Router, please skip step 1 and proceed to the following page.
-
Launch the AmpliFi app.
iPhone Users: Ensure that Bluetooth is enabled. Android Users: Ensure that Wi- Fi is enabled. -
Power off your broadband modem.
-
Connect one end of the Ethernet Cable to your broadband modem and the other end to the Internet port on the AmpliFi Router.
-
Connect the Power Adapter to the power port on the AmpliFi Router.
-
Connect the Power Adapter to a power outlet.
-
Power on your broadband modem.
-
App Users Follow the on-screen instructions to configure your AmpliFi Router.
Non-App Users Perform the following steps:
-
Tap the touchscreen on the AmpliFi Router.
-
Use a computer or tablet to connect to the unique wireless network (SSID) displayed on the screen of your AmpliFi Router.
Please connect to this Wi-Fi Network
AFI-LR-1234567890XX Setup -
Launch a web browser and a portal will appear. Enter a new name for your wireless network and create a wireless password. Click Save & Continue.
-
Connect to the new wireless network that you’ve created from your computer or tablet.
Installing the Mesh Points
For best performance, the Mesh Points should be placed in different directions between the Router and the areas farthest from the Router. Mesh multi-hop should only be used when necessary as performance will degrade with each hop.
Mesh Point installation is optional and may not be necessary in smaller homes.
- Plug the Mesh Point into a power outlet.
- After about a minute, LEDs will reflect signal strength once the Mesh Point is connected to the Router.
- The Mesh Point antenna can be adjusted to provide optimal signal coverage for your location.
Tip: If a Mesh Point is powered on and has been configured with the app but does not appear online, try relocating the Mesh Point closer to the Router.
App Features
24/7 Live Chat Support
Live chat support is available within the app, 24 hours a day, 7 days a week. Tap the icon in the upper left of the app and then tap Live Support.
Live chat is also available at help.amplifi.com by selecting Chat with us in the bottom right.
Resetting to Factory Defaults
If the AmpliFi Router administration password is lost, factory default settings can be restored. Use an object such as a straightened paper clip or pin to press the Reset located on the bottom of the AmpliFi Router for approximately 10 seconds until the LED turns off.
If the AmpliFi Router is reset, all Mesh Points should also be reset using the same method.
System Specifications
Supported Data Rates
Limited Warranty
UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s)
furnished hereunder (the “Product(s)”) shall be free from defects in material
and workmanship for a period of one (1) year from the date of shipment by
UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS’ sole and
exclusive obligation and liability under the foregoing warranty shall be for
UBIQUITI NETWORKS, at its discretion, to repair or replace any Product that
fails to conform to the above warranty during the above warranty period. The
expense of removal and reinstallation of any Product is not included in this
warranty. The warranty period of any repaired or replaced Product shall not
extend beyond its original term.
Warranty Conditions
The above warranty does not apply if the Product:
(I) has been modified and/or altered, or an addition made thereto, except by
Ubiquiti Networks, or Ubiquiti Networks’ authorized representatives, or as
approved by Ubiquiti Networks in writing;
(II) has been painted, rebranded or physically modified in any way;
(III) has been damaged due to errors or defects in cabling;
(IV) has been subjected to misuse, abuse, negligence, abnormal physical,
electromagnetic or electrical stress, including lightning strikes, or
accident;
(V) has been damaged or impaired as a result of using third party firmware;
(VI) has no original Ubiquiti MAC label, or is missing any other original
Ubiquiti label(s); or
(VII) has not been received by Ubiquiti within 30 days of issuance of the RMA.
In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation; all Ethernet cabling runs use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed.
Returns
No Products will be accepted for replacement or repair without obtaining a
Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the
warranty period, and the Products being received at UBIQUITI NETWORKS’
facility freight prepaid in accordance with the RMA process of UBIQUITI
NETWORKS. Products returned without an RMA number will not be processed and
will be returned freight collect or subject to disposal. Information on the
RMA process and obtaining an RMA number can be found at:
www.amplifi.com/support/warranty.
Disclaimer
EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS
AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE
PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY
KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO,
REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY,
QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF
VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON-
INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR
TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. BUYER
ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS
CONTROL BUYER’S EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS
FACILITIES, INCLUDING THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER
PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS,
ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR
ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS,
CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE
FOREGOING. In addition, UBIQUITI NETWORKS does not warrant that the operation
of the Products will be error-free or that operation will be uninterrupted. In
no event shall UBIQUITI NETWORKS be responsible for damages or claims of any
nature or description relating to system performance, including coverage,
buyer’s selection of products (including the Products) for buyer’s application
and/or failure of products (including the Products) to meet government or
regulatory requirements.
Limitation of Liability
EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS
SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA,
OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS
OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER
LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Note
Some countries, states and provinces do not allow exclusions of implied
warranties or conditions, so the above exclusion may not apply to you. You may
have other rights that vary from country to country, state to state, or
province to province. Some countries, states and provinces do not allow the
exclusion or limitation of liability for incidental or consequential damages,
so the above limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY
LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN
ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY
SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention on
Contracts for the International Sale of Goods shall not apply to any
transactions regarding the sale of the Products.
Compliance
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions. 1 This device may not cause harmful
interference, and
2 This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is
connected. · Consult the dealer or an experienced radio/TV technician for
help.
Operations of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
The AmpliFi Router and Mesh Points have been approved by FCC under FCC ID:
SWX-AFR (for Router); FCC ID: SWX-AFP (for Mesh Points)
CAN ICES-3(B)/NMB-3(B)
This Class B digital apparatus complies with Canadian CAN ICES-003.
To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotopically radiated power
(e.i.r.p.) is not more than that permitted for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: 1 This device may not
cause interference, and
2 This device must accept any interference, including interference that may
cause undesired operation of the device.
The AmpliFi Router and Mesh Points have been approved by Industry Canada under
IC: 6545A-AFR (for Router); IC: 6545A-AFP (for Mesh Points). The device for
the band 5150-5250 MHz is only for indoor usage to reduce potential for
harmful interference to co-channel mobile satellite systems.
CAN ICES-3(B)/NMB-3(B)
RF Exposure Warning
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be located
or operating in conjunction with any other antenna or transmitter.
CE Marking
CE marking on this product represents the product is in compliance with all
directives that are applicable to it.
Alert Sign (!) Follows CE Marking
Alert sign must be indicated if a restriction on use applied to the product
and it must follow the CE marking.
European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/ or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.
Declaration of Conformity
English Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI NETWORKS device, is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Support
Online help.amplifi.com Email help@amplifi.com
©2016 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, ULabs, the ULabs logo, AmpliFi, and Home Wi-Fi Perfected are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android, Google, Google Play, the Google Play logo and other marks are trademarks of Google Inc. All other trademarks are the property of their respective owners. 640-00236-05 · RRJL080316 32
References
- Manual-Hub.com - Free PDF manuals!
- AmpliFi | Faster, Whole-Home Wi-Fi
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>