blinds2go B0B4RNJVJ8 Smart View Enjoy Roller Blinds Installation Guide
- September 17, 2024
- blinds2go
Table of Contents
Installation Guide
Enjoy Roller Blinds
B0B4RNJVJ8 Smart View Enjoy Roller Blinds
We’ve made a handy video version of this fitting guide, just click the play button to view it. If you prefer to print the instructions or simply to follow step-by-step, just keep reading.
Fitting the brackets
The brackets offer two methods of installation: Top-Fixing
Use the single hole in the top of the bracket to fix to the lintel (the
‘ceiling’ of the recess). The protruding tab on the bracket should be closest
to the window Face-Fixing
Join the bracket to the ‘L’ shaped face-fixing plate.
Use two screws through the back plate to mount onto a facing surface (a wall
or window frame) Note that the position of the outermost brackets should be at
least 5cm away from the ends of the rail, with any other brackets evenly
distributed across the width. For safety reasons, always ensure that the top
of the blind is installed at least 150cm (1500mm) from the floor.
Fitting the blind
Situate the front lip of the headrail into the front of the bracket. Push the back of the headrail upwards to lock it into the back of the bracket. To release the blind from the brackets at any point after installing, push up firmly against the tab protruding from the back of the bracket. At the same time, twist the back of the headrail downwards to disengage it at the back.
Child Safety
Not applicable for SmartView Roller Blinds
Cord Tensioner The cord retaining device must be installed at the maximum
distance possible from the control mechanism to prevent looped cords from
becoming slack.
Place the retaining device on the wall and mark the position of the screw
hole(s) with a pencil.
Attach the retaining device to the wall using the fixings provided.
WARNING
Young children can be strangled by loops in pull cords, chains, tapes and
inner cords that operate the product. To avoid strangulation and entanglement,
keep cords out of the reach of young children.
Cords may become wrapped around a child’s neck.
Move beds, cots and furniture away from window covering cords.
Do not tie cords together. Make sure cords do not twist and create a loop.
SmartView Enjoy Roller Blinds
Once your blind is installed we recommend plugging in the motor to allow it to fully charge before use. Plug the charging cable (included) into the motor charging port and allow to charge until the LED on the charger plug turns green. On the front of the swing tag that comes with your blind, you’ll find a handy QR code you can scan with your phone. Scan this to download the SmartView app – you’ll be setting up your blinds in moments!
Recycle your electrical and electronic devices free at your local recycling centre. To find your nearest centre, visit the Recycle More website and type in your postcode.
Blinds 2go Ltd is part of the DTS scheme.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>