APRIA SLP-4389 Luna G3 React Health User Guide

SLP-4389 Luna G3 React Health

“`html

Specifications:

• Product: Apria Sleep Therapy
• Type: CPAP and Bilevel
• Water Chamber Capacity: Approximately 360 ml
• SD Card Slot: Yes (Optional)
• Wireless Modem: Built-in

Product Usage Instructions:

1. Placing the Device: Place the device on a firm
   flat surface.

2. Connecting Power Cord: Insert the power
   adapter plug into the DC inlet on the back of the device and
   connect the power cord to the power adapter. Plug the other end of
   the power cord into the power outlet.

3. Connecting Tubing: Connect the end of the
   tubing to the air outlet of the device. If using heated tubing,
   connect the heated tubing joint to the air outlet of the device and
   insert the power plug into the heated tubing port on the back of
   the device. Connect the other end of the tubing to the mask
   according to the user manual for the mask.

4. Filling Water Chamber: Press down the water
   chamber, remove it, open the water chamber cap, fill with
   approximately 360 ml of water, and then close the cap and return it
   to the device.

5. Inserting SD Card (if applicable): If you
   received an SD card, insert it into the SD card slot. Newer devices
   may not require an SD card.

6. Starting Device: Connect the device to a power
   outlet, press the Start/Stop button, and the device will start
   delivering air.

7. Fitting Mask: Fit your mask following the
   manufacturer’s instructions. Use the Fitting Template for nasal
   mask and full face mask if needed.

8. Taking Breaths: Lie down, take four deep
   breaths, and let the machine start automatically. If needed, press
   the Start Therapy/Standby button.

9. Checking for Air Leaks: Check for air leaks.
   Small leaks are acceptable, but consult your User Guide if large
   leaks occur.

10. PAP Therapy: Put on your mask and attach the
    tubing to the PAP machine to begin your therapy.

FAQ:

Q: Do I need to connect to WiFi for my Apria Sleep
Therapy device?

A: Your device has a wireless modem and will
transmit without connecting to WiFi. Unless you purchased a
wireless modem separately, you do not need to connect to WiFi.

“`

Your Apria Sleep Therapy
Quick Start Guide
React Health Luna® G3
Formerly known as 3B Medical, Inc.
CPAP and Bilevel

Get Started
Reference your Apria Sleep Therapy User Guide or go to Apria.com/Sleep for more details.

1

Place the device on a firm flat surface.

See User Guide page 3

4

Press down the water chamber, and then remove it. Open the water chamber cap and fill the water

chamber with approximately 360 ml of water.

See User Guide page 4

2

Connect the Power Cord: Insert the plug

DC

of the power adapter

Inlet

into the DC inlet on

the back of the device.

Connect the power cord to the power

Power Adapter

adapter. Plug the other

Power Cord

end of the power cord

into the power outlet.

NOTE: If you have a BPAP device see User Guide page 3 to connect the Power Cord Locker.

5

Close the cap after the water is filled and return it to the device.

See User Guide page 5

3

Connect the end of the tubing to the air outlet of the device.

Air

If using heated tubing,

Outlet

connect the heated tubing

joint to the air outlet of the device, and then insert the

Tubing

power plug into the heated tubing port on the back of

Air Outlet

the device.

Heated Tubing

Connect the other end of the tubing to the mask according to the user manual for the mask.

Heated Tubing Joint
Heated Tubing

Power Plug

See User Guide page 4

6

If you received an SD card, insert it into the SD card slot.

Note: Newer devices

SD Card Slot

do not need an SD card. SD Card

See User Guide page 5

7

Connect the device to a power outlet, press the

Start/Stop button

and the device will start

delivering air.

See User Guide page 5

Note about WiFi: Your device has a wireless modem and will transmit without connecting. Unless you purchased a wireless modem separately, you do not need to connect to WiFi.

8 Fit your mask. If your doctor prescribed a
specific mask and size, follow the fitting instructions provided by the manufacturer. If you received a mask with multiple cushions, follow these instructions:
There is a mask cushion currently attached to the frame of your mask. This size fits most patients. Once you begin therapy, if your mask is leaking or feels uncomfortable, try removing the existing cushion and replacing it with a different size cushion. If you are between sizes, it is best to use the larger cushion. Use the Fitting Template (for nasal mask and full face mask) and/or the manufacturer’s instructions included with your mask for help.
See User Guide page 6

11 Attach the tubing to your mask.
(If using prescribed oxygen, consult page 10 in your Apria Sleep Therapy User Guide.) See User Guide page 10
12 Lie down and take four deep breaths.
The machine should start automatically. If you do not hear the machine start, press the Start Therapy/Standby button. Relax and begin to take slow breaths through your nose. See User Guide page 12

Nasal Mask

Nasal Pillow Mask

Full Face Mask

13 Check for air leaks.
Small leaks are acceptable. If large leaks occur, consult your Apria Sleep Therapy User Guide.
See User Guide pages 12­13

9 Put on your mask.
See User Guide pages 7­9

14 Your setup is complete. You are now ready to
begin your PAP therapy! See User Guide page 14

10

Attach the tubing to the PAP machine.

See User Guide pages 10­11

15

Make sure to follow the cleaning and maintenance instructions provided and review

the recommended supply replacement schedule.

See User Guide pages 19­21

©2024 Apria Healthcare Group LLC

If you have any questions or need help setting up your device and getting started, please call us or visit Apria.com/Sleep.
877.265.2426
Monday – Friday: 8 a.m. – 10 p.m. ET Saturday: 11 a.m. – 7:30 p.m. ET
SLP-4389 Rev. 08/24_v10

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>