Storm AT00-15001 Microphone Array Module Owner’s Manual
- September 17, 2024
- STORM
Table of Contents
AT00-15001 Microphone Array Module
“`html
Specifications
-
Product Name: Microphone Array Module Configuration
Utility -
Compatibility: Windows 10, Windows 11
-
Connection: USB
Product Usage Instructions
System Requirements
The utility will communicate over the same USB connection but
via the HID-HID data pipe channel, no special drivers are
required.
Procedure
-
Download the utility from www.storm-interface.com/downloads.
-
Create a mic array folder and copy in the following downloaded
files:- usb_upgrade.exe
- eula.rtf (SLA software licence agreement)
- firmware.sfs (firmware file)
- 000-IC-211-MICVXX-DWG.sfs (XX is version number, factory
default firmware)
-
Locate the firmware update file and save it in the folder as
firmware.sfs. -
Run the firmware update:
-
Connect the Microphone Array Module to a USB port (CD3 and E00
are the VID and PID). -
Open a command prompt window.
-
Navigate to the mic array folder.
-
Use the following command: usb_upgrade 0cd3 0e00.
-
When the upgrade is in progress, you will see a log file, and
on completion, a success message. -
Unplug the Microphone Array Module and make a note of the
serial number and the new firmware version for your records.
FAQ
Q: What are the system requirements for the Microphone Array
Module Configuration Utility?
A: The utility is compatible with Windows 10 and Windows 11, and
it communicates over USB via the HID-HID data pipe channel.
Q: How do I update the firmware of the Microphone Array
Module?
A: To update the firmware, download the utility from the
provided link, follow the procedure outlined in the user manual,
and run the firmware update using the specified commands in a
command prompt window.
“`
Microphone Array Module Configuration Utility
Contents
Command Line Utility
System Requirements
2
Procedure
2
Run firmware update
2
Change History
3
The content of this communication and / or document, including but not limited
to images, specifications, designs, concepts, data and information in any
format or medium is confidential and is not to be used for any purpose or
disclosed to any third party without the express and written consent of Keymat
Technology Ltd. Copyright Keymat Technology Ltd. 2022 .
Storm, Storm Interface, Storm AXS, Storm ATP, Storm IXP , Storm Touchless-CX,
AudioNav, AudioNav-EF and NavBar are trademarks of Keymat Technology Ltd. All
other trademarks are the property of their respective owners
Storm Interface is a trading name of Keymat Technology Ltd Storm Interface
products include technology protected by international patents and design
registration. All rights reserved
Microphone Array Module – Config Utility Rev 1.0
www.storm-interface.com
Page 1 of 3
Microphone Array Module Configuration Utility
System Requirements
The utility will communicate over the same USB connection but via the HID-HID
data pipe channel, no special drivers are required.
Compatibility
Windows 10
Windows 11
The utility can be used to configure the product to load firmware updates
Procedure
Download the utility from www.storm-interface.com/downloads,
Create a mic array folder and copy in the following downloaded files :-
usb_upgrade.exe
eula.rtf
(SLA software licence agreement)
firmware.sfs
(this is the firmware file that will be installed)
000-IC-211-MICVXX-DWG.sfs (XX is version number, this is the factory default firmware)
Ensure you have signed and returned a copy of the SLA
Locate the firmware update file and then save it in the folder as firmware.sfs
Run the firmware update
Connect the Microphone Array Module to a USB port (CD3 and E00 are the VID and PID) Open a command prompt window Navigate to the mic array folder Use the following command : usb_upgrade 0cd3 0e00 When the upgrade is in progress you will see a log file and on completion a success message
Unplug the Microphone Array Module Make a note of the serial number and the new firmware version for your records
Microphone Array Module – Config Utility Rev 1.0
www.storm-interface.com
Page 2 of 3
Change History
Instructions for Config Utility
Microphone Array Module Configuration Utility
Date 29 Apr 22
Version 1.0
Details First release
Configuration Utility
Date 29 Apr 22
Version 1.0
Details First Release
Microphone Array Module – Config Utility Rev 1.0
www.storm-interface.com
Page 3 of 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>