intel Different Types of Server SSD Interface User Guide
- June 3, 2024
- Intel
Table of Contents
Different Types of Server SSD Interface
User Guide
Introduction
When it comes to computer storage, HDDs are probably mentioned most of the time. However, SSDs enable faster information processing and better computer performance with lower power. The following will focus on three server SSD interfaces and their differences.
Types of Server SSD interfaces
Serial Advanced Technology Attachment (SATA) is used to transmit data between motherboard and storage devices like hard disks over a high-speed serial cable. As a half- duplex interface, SATA can only use one channel/direction to transfer data and cannot perform read and write functions at the same time.
Serial Attached SCSI (SAS) is a new generation of SCSI technology and adopts serial technology for higher transmission speed, which also supports hot swapping. It is a full- duplex interface and supports simultaneous read and write functions.
Non-Volatile Memory Express (NVMe) interface connects to a PCI Express (PCIe) slot on the motherboard. Located directly between device drivers and PCIe, NVMe is able to achieve high scalability, security, and low latency data transmission.
Read/Write speed
Scalability&Performance
Latency
Price
Copyright © 2022 FS.COM All Rights Reserved
Documents / Resources
|
intel Different Types of Server SSD
Interface
[pdf] User Guide
Different Types of Server SSD Interface, Types of Server SSD Interface, Server
SSD Interface Types, Server SSD Interface Deferent Types
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>