Reality 644804-06 Smd Led Instructions
- September 19, 2024
- Reality
Table of Contents
644804-06 Smd Led
Article No: 644804-06
Installation Instructions: Warning!
Before assembling, please read carefully the safety instructions!
230V~50Hz,SMD LED 22W Max, 1760LM 3000K
TAKE CARE OF THE NATURAL ENVIRONMENT
In Poland, in accordance with the regulations on waste electrical and
electronic equipment, it is prohibited to place waste equipment marked with
the crossed-out bin symbol together with other waste.
The user who intends to dispose of this product is obliged to return the waste
electrical and electronic equipment to a collection point for waste equipment.
Collection points are run by, among others, wholesalers and retailers of this
equipment and by municipal organizational units conducting activities in the
field of waste collection.
The above statutory obligations were introduced in order to limit the amount
of waste generated from waste electrical and electronic equipment and to
ensure an appropriate level of collection, recovery and recycling of waste
equipment. Proper implementation of these obligations is especially important
when the waste equipment contains hazardous components that have a
particularly negative impact on the environment and human health. Households,
by raising awareness and complying with applicable regulations, play a
significant role in
contributing to the reuse and recovery, including recycling of used equipment.
BASIC SAFETY RULES
The technical condition of the lamp should be checked regularly, especially
the power cord and switch. Never use a lamp with a damaged power cord, switch
or when the lamp is damaged. If the external flexible cable or cord is
damaged, it should only be replaced by the manufacturer or its service
technician or a similarly qualified person, in order to avoid risk. If a fault
is found, it may only be repaired by a person with appropriate authorisations.
The lamp is not a toy and should be kept out of reach of children. Do not wrap
the power cord around the lamp. Do not carry the lamp by the power cord. The
lamp is for indoor use only. When installing a new bulb, take maximum care and
make sure that the power supply has been disconnected. The product poses a
hazard when hot.