THIRD REALITY ZigBee Remote Control Smart Button Instructions

Smart Button

Main (With function keys and indicator lights)

Product Introduction
Third Reality Smart Button is a ZigBee remote control button with a compact design and comes with 2 AAA batteries. You can install it by magnetic sheet or double-sided tape. Single, double, or long press to control other smart devices and suit for various scenes. ZigBee hub is required: (choose a support)

1. Third Reality Hub V1 and V2
2. SmartThings Hub or Aeotec
3. Home Assistant
4. Hubitat

Mounting Kit

Sticker
Magnetic sheet
User manual
AAA Battery (built-in)

Quick Setup

1. Choose the gateway which is compatible and configurate it accordingly.
2. Pull out the insulation sheet and then the blue led light will blinks indicating that the button is in pairing mode now.
3. Follow the prompts in the App of the corresponding HUB to complete the setup.

Installation

Effective distance confirmation: In the pre-selected installation location, it is clear that the device and the gateway can communicate effectively.

1. No need to paste, directly place detailed map where you would want (Detailed picture.)
2. Using the included double-sided sticker, stick it on the back and secure it in a safe place. (Detailed picture.)
3. Using the included magnetic piece, glue it into the groove on the back and hold the other piece in a pre-selected mounting position, which can be placed and removed freely. (It can also be directly adsorbed on furniture on metal materials). (Detailed picture.)

Using your Smart Button

Pair With SmartThings:

1. Add Device, the app show “Third Reality Smart Button” （Add the app device, it shows “Third Reality Smart Button”）
2. On the details page, associate the device or group to be controlled by setting the three operation behavior settings of pressing, double-clicking, and pressing.) Set up and start using

Pair with Third Reality Hub：On the ThirdReality App

1. Add the device , it shows “Third Reality Smart Button”
2. On the details page, associate the device or group to be controlled by setting the three operation behavior settings of pressing, double-clicking, and pressing. Set up and start using

FCC STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

INDUSTEY CANADA STATEMENT:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. In additional, this device complies with ICES-003 of the Industry Canada (IC) Rules. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Industry Canada licence-exempt RSS standard(s). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there s no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>