Aeroflow Breastpumps Powered Breast Pump User Guide
- September 15, 2024
- Aeroflow Breastpumps
Table of Contents
Aeroflow Breastpumps Powered Breast Pump
Product Specifications
- Product Type: Breast Pump
- Power Source: Electric
- Features: Night Light, Independent Cycle/Vacuum, Rechargeable/Wireless
- Additional Components: Tubing, Diaphragm, Backflow Protectors, Valve, Connector, Flange/Breast Shield, Milk Collection Container
Product Usage Instructions
Powering On and Mode Selection:
Press the Power Button to turn on the breast pump. Use the Mode Button to
switch between massage mode for stimulation and expression mode for milk
removal.
Adjusting Settings:
Utilize the Increase/Decrease Buttons to adjust the cycle (speed) and
vacuum (suction) levels according to your comfort and needs.
Night Light Feature:
If available, use the Night Light Button to provide visibility during
nighttime pumping sessions.
Pump Part Replacement:
Regularly replace pump parts based on the recommended schedule provided in
the Pump Parts Replacement Guide to maintain optimal performance.
Cleaning and Maintenance:
Refer to the user manual for detailed cleaning instructions.
Ensure all parts are properly cleaned and sanitized after each use.
Frequently Asked Questions (FAQ)
-
Q: How often should I replace the valve membrane?
A: For users pumping 3+ times a day, it is recommended to replace the valve membrane every 2-4 weeks. For those pumping 1-2 times a day, replacement is advised every 2 months. -
Q: What is the purpose of backflow protectors?
A: Backflow protectors prevent milk from entering the tubing and motor, ensuring hygienic pumping and protecting the pump from damage.
Breast Pump Buttons
Power Button
Mode Button:
Use to switch between massage mode and expression mode
Increase/Decrease Buttons:
Two sets of buttons for cycle (speed) and vacuum (suction
Night Light Button
DISCLAIMER: Location of these buttons will vary between pump and/or
manufacturers. Not every pump has every button listed. Please see user manual
for details.
Pump Parts Replacement Guide
DUCKBILL VALVE
- 3+ Pumps per Day: Replace every month
- 1-2 Pumps per Day: Replace every 2-3 mo.
VALVE MEMBRANE
- 3+ Pumps per Day: Replace every 2-4 wks.
- 1-2 Pumps per Day: Replace every 2 mo.
BACKFLOW PROTECTORS
- 3+ Pumps per Day: Replace every 3 mo.
- 1-2 Pumps per Day: Replace every 6 mo.
TUBING
When it becomes damaged
FLANGES
Replace every 6 months
MILK COLLECTION CONTAINER
Replace every 6 months
For more information about replacement parts, visit
Aeroflowbreastpumps.com or refer to your
breast pump’s user manual.
DISCLAIMER: Most breast pump manufacturers have a limited warranty on the parts included with your pump and many insurers will cover replacement equipment. For pump safety and efficiency, it is recommended to replace these supplies at least every 90 days or as soon as you begin to notice discoloration, build up and/or lack of performance.
Breast Pump Terms
INDEPENDENT CYCLE/VACUUM
Feature that can customize suction strength and speed.
LETDOWN/MASSAGE MODE
Speed and suction setting with very fast light suctions per minute to help
stimulate your milk to start flowing.
EXPRESSION MODE
Speed and suction setting with slower, deeper suctions to remove milk once it
starts flowing.
RECHARGEABLE/WIRELESS
Power option for pumps that can be charged and don’t require constant
electricity.
BATTERY PACK
Power option for pumps that can use 6-8 batteries to operate instead of an AC
adapter.
TUBELESS/WEARABLE
Type of pump that can be worn inside a bra for discreet pumping.
Our classes and accompanying materials are intended for general education
purposes and should not replace medical evaluation or consultation. Please
seek advice from your own healthcare providers for individualized
recommendations.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>