Playskool 23238 Glo Worm SmartSense Instruction Manual
- September 14, 2024
- PLAYSKOOL
Table of Contents
Playskool 23238 Glo Worm SmartSense
CLEANING
Remove the sound unit and close the fabric fastener securely before washing. Place in pillowcase; tie closed. Machine wash separately, with cold water, gentle cycle, no bleach, and tumble dry low. Do not wash toys with electronics inside!
Refer to battery caution information on a separate sheet. Retain this information for future reference.
HOW TO RECORD
- Switch to
- Press and hold. The face will flash rapidly 4 times.
- Keep holding and recording audio (up to 2 minutes). Light will pulse slowly while recording.
- Release to stop recording and hear playback. Repeat steps to re-record as needed.
CRY DETECTION
In modes, press 1x to activate the cry detection feature for up to 5 hours. While the detection feature is active press 1x to play your recording or built-in music on command, after which cry detection will resume.
ENERGY SAVE MODE
Switch to . Glo Worm will not listen to the baby’s cry. Sounds can still be activated by pressing the toy in this mode.
FEATURES
- SmartSense Technology: Depending on the baby’s mood, this feature automatically modifies the music and illumination to calm them.
- Gentle Glow: This gentle, soothing glow soothes newborns before bed.
- Plays a selection of calming lullabies to aid in lulling a baby to sleep.
- The soft, velvety body of the huggable design is ideal for cuddling.
- A light-activated sensor causes the Glo Worm to glow and play music when the baby touches it.
- Cry Detection: This feature calms the infant by turning on automatically when it detects crying.
- Numerous Sound Settings: Provides a variety of sound settings, such as white noise, natural noises, and lullabies.
- Volume can be readily changed to suit the demands of the infant thanks to the adjustable volume control.
- Auto Shut-Off : To preserve battery life, the device turns off after 15 minutes.
- Machine Washable: For simple upkeep, the stuffed body may be taken off and cleaned in a machine.
- Battery Operated: This device is portable because it runs on batteries.
- Compact Design: This item is small enough to fit within baby bags, strollers, and cribs.
- Night Mode: Designed to run silently at night so the infant doesn’t wake up.
- Contains no BPA and is composed of non-toxic, child-safe components.
- Lightweight: Babies can easily manage this because it weighs little less than one pound.
- Simple to Clean: Spot cleaning is made easier by the surface material.
- Interactive Features: Promotes touch and movement interactions between babies and the toy.
- Soft Light Settings: These let you adjust the brightness of the light to suit your baby’s preferences.
- Portable: For comfortable travel, it may be utilized both at home and on the go.
- Sturdy Construction: Made to endure abrasions, this item is long-lasting for babies and young children.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAN ICES-3 (B)/NMB-3(B)
C-3632A
Playskool and HASBRO and all related trademarks and logos are trademarks of Hasbro, Inc.©2020 Hasbro, Pawtucket, RI 02861-1059 USA. HASBRO CANADA, LONGUEUIL, QC, CANADA J4G 1G2.
US/CANADA
- TEL. 1-800-255-5516
- TEL. 5876-2998
- TEL. 01-800-7-12-62-25
- centrodeserviciomexico@hasbro.com
FREQUENTLY ASKED QUESTIONS
What is the Playskool 23238 Glo Worm SmartSense?
The Playskool 23238 Glo Worm SmartSense is a soothing toy designed for babies. It features a soft, glowing light and calming sounds to help comfort and lull babies to sleep.
What are the dimensions of the Playskool 23238 Glo Worm SmartSense?
The Playskool 23238 Glo Worm SmartSense measures 7.36 x 2.87 x 12.01 inches.
How much does the Playskool 23238 Glo Worm SmartSense weigh?
The Playskool 23238 Glo Worm SmartSense weighs 8.8 ounces.
What is the recommended age for the Playskool 23238 Glo Worm SmartSense?
The Playskool 23238 Glo Worm SmartSense is recommended for babies aged 1 month and up.
What type of batteries does the Playskool 23238 Glo Worm SmartSense require?
The Playskool 23238 Glo Worm SmartSense requires 2 AA batteries.
What is the price of the Playskool 23238 Glo Worm SmartSense?
The Playskool 23238 Glo Worm SmartSense is priced at $19.95.
Who is the manufacturer of the Playskool 23238 Glo Worm SmartSense?
The Playskool 23238 Glo Worm SmartSense is manufactured by Hasbro.
What features does the Playskool 23238 Glo Worm SmartSense include?
The Playskool 23238 Glo Worm SmartSense includes a soft, glowing light and soothing sounds to help calm and comfort babies.
How is the Playskool 23238 Glo Worm SmartSense powered?
The Playskool 23238 Glo Worm SmartSense is powered by 2 AA batteries.
Why isn't my Playskool 23238 Glo Worm SmartSense turning on?
Ensure the batteries are properly inserted and have enough charge. If the device still doesn’t turn on, check for any corrosion in the battery compartment and replace the batteries if necessary.
Why does my Playskool 23238 Glo Worm SmartSense stop playing music after a few seconds?
This could be due to the auto shut-off feature. If it turns off prematurely, it may be due to low batteries. Try replacing the batteries and ensure they are properly installed.
What should I do if the light on my Playskool 23238 Glo Worm SmartSense flickers or doesn’t light up?
Flickering lights often indicate low battery power. Replace the batteries with fresh ones and make sure the battery connections are secure. If the issue persists, the LED light may be malfunctioning.
Why is the sound distorted on my Playskool 23238 Glo Worm SmartSense?
Distorted sound can be caused by low battery power. Try replacing the batteries. If the sound is still unclear, check the speaker area for dirt or debris that may be obstructing it.
How do I fix the Playskool 23238 Glo Worm SmartSense if the sound won’t play?
First, make sure the volume isn’t turned off. Check if the batteries are running low or dead and replace them if necessary. Also, inspect the speaker for any blockages or damage.
Why does my Playskool 23238 Glo Worm SmartSense turn off by itself?
This may be due to the device’s automatic shut-off feature to conserve battery. However, if it shuts off too soon, it could be caused by low battery power or a sensor malfunction. Try resetting the device by removing and reinserting the batteries.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:Playskool 23238 Glo Worm SmartSense Instruction Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>