PLAYSKOOL 34451 Sit ‘n Spin Classic Instruction Manual
- June 13, 2024
- PLAYSKOOL
Table of Contents
OVER ½ to 5 ½ years
Maximum weight
42 lbs. (19 kgs.)
34451 Sit ‘n Spin Classic
INCLUDES: base, center post (2 halves), 3 screws, turn handle and
instructions.
Adult assembly required.
Phillips/cross head screwdriver (not included) needed for assembly.
This product contains 1 x #10 (3/4”) and 2 x #6 (1/2”)
Phillips head sheet metal screws. Replacement screws, if needed, are available
at most hardware stores.
Sit’n Spin®
WARNING:
Product must be assembled by an adult. This product contains small parts which
are necessary for assembly.
Prior to and during assembly of this product, keep small parts out of
children’s reach. Small parts pose a choke hazard to children under 3 years.
ASSEMBLY:
STEP 1 STEP 2
Remove the 3 screws taped to the top of the base.
Use a Phillips/crosshead screwdriver (not included) and the 2 #6 screws
(included) to connect the turn handle to the top of the center post. The
screws connect on the sides of the turn handle as shown.
STEP
3
Place the center post/turn handle into the base as shown. Flip the base over
and use a Phillips/crosshead screwdriver and 1 #10 screw (included) to connect
the center post/turn handle to the base.
NOTE: Check to be sure that all assembled parts are securely attached
before using the toy. 
PMS 186 Black PIGUET GRAPHIC 5-12-11 Hb F12-2-7
344511990_PLA_sit n spin_FAR.OP /EPSON 18Mac 06 175 PLA PLAY FAVORITES SIT N
SPIN – US
Visit.PLAYSKOOL.com
© 2011 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
34451 Asst
PN 7251370000
Questions? Call 1-800-PLAYSKL
344511990_PLA_sit n spin_OP.indd 2
05/12/2011 2:55 PM