STMicroelectronics CAM-6G3-084CLR VL53L8CX Time of Flight Sensor Instruction Manual
- September 14, 2024
- STMicroelectronics
Table of Contents
STMicroelectronics CAM-6G3-084CLR VL53L8CX Time of Flight Sensor
Product Specifications
- Model: CAM-6G3-084CLR
- Revision: 1
- Release Date: June 2024
Schematic Diagrams
- Note: The schematic diagrams provided are for the latest version of the product.
- Note 2 : External capacitors need to be added at the host side for VDDIO, VCORE, and VANA pins. Refer to the Application Schematic section of the datasheet for more details.
IMPORTANT NOTICE
READ CAREFULLY
- STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold under ST’s terms and conditions of sale in place at the time of order acknowledgment.
- Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products.
- No license, express or implied, to any intellectual property right is granted by ST herein.
- Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
- ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners.
- Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2024 STMicroelectronics – All rights reserved
Frequently Asked Questions
- Q: How do I know if I have connected the external capacitors correctly?
- A: You can use a multimeter to check the continuity of the connections and ensure that the capacitors are properly connected to the designated pins.
- Q: What should I do if the device does not power on after installation?
- A: Double-check all connections, and power supply voltages, and ensure that the external capacitors are correctly installed. If the issue persists, contact customer support for further assistance.
- Q: Can I use alternative GPIO configurations?
- A: It is recommended to follow the GPIO configurations provided in the data sheet to ensure proper functionality. Alternative configurations may not be supported.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>