NetComm NL20MESH6 Wi-Fi 6 LTE CloudMesh Gateway User Guide
- September 15, 2024
- NetComm
Table of Contents
NetComm NL20MESH
Quick Start Guide
get to know your NetComm NL20MESH
The NetComm NL20MESH delivers a new adaptive Wi-Fi experience to your home with improved Wi-Fi speed, performance, and efficiency, as well as 4G backup. The NetComm NL20MESH’s key features include:
- 4G backup provides backup internet connectivity by automatically switching to 4G if the primary broadband connection fails.^
- Mesh-enabled for seamless connection to CloudMesh Satellites
- Automated Wi-Fi issue resolution with Wi-Fi AutoPilot
- Gigabit connection to high-speed fibre networks
- Support for VDSL2 and Voice
- Wi-Fi visibility and assurance with the Wi-Fi Analytics Platform
^4G Backup is available for use with eligible business nbn® plans when you purchase a compatible modem from More. Subject to data usage caps. If you go over your included monthly data allowance, 4G Backup will not work. 4G Backup only available in areas with Optus 4G coverage.
- Top View of Device
LED Indicator Lights
These lights represent the working state and and connectivity of the NetComm NL20MESH
Solid Green = Connected
Blinking Green = Initiating Connection
Red = Disconnected
Yellow/Amber = Connected but weak/moderate signal strength (enabled but inactive)
Back View of Device
- Power Supply Jack
- Reset Button
- VoIP Port
- DSL Port
- USB3.0 Port
- Ethernet LAN Ports
- WAN Port
Button/Connection Port | Description |
---|---|
Power Supply Jack | Connection point for the included power adapter to |
connect the power supply.
Reset Button| To reset unit to Default (hold down button for 10 seconds
when unit is powered on).
VoIP Port| Connect a telephone handset for phone calls over the
internet.
DSL Port| Connect the telephone line operating your VDSL service. Fibre
to the Node (FTTN) and Fibre to the Building (FTTB) services use the DSL port.
USB 3.0 Port| Connect an external USB storage device here to use the
Network Attached Storage (NAS) feature of the CloudMesh Gateway (e.g., stream
your digital media).
Ethernet LAN Ports| Connect your ethernet based devices (e.g., desktop,
computer, laptop, and/or router).
WAN Port| Connect network termination device (NTD) for high speed
internet access. Fibre to the Premises (FTTP), Fibre to the Curb (FTTC),
Hybrid Fibre Coaxial (HFC).
Side View of Device
- (3) seconds and toggle the LED
- On/Off Button
- Wi-Fi Button
WPS/LED Button
Will trigger the Wi-Fi Protected Setup (WPS) function when held down for approximately three indicators on or off when held for approximately six (6) seconds.
setting up your NetComm NL20MESH
Step 1: Power on the NetComm NL20MESH
Wait a few minutes for it to start up.
Step 2: Connect your NetComm NL20MESH
Depending on your NBN technology type, your NetComm NL20MESH will connect differently. If you are unsure of your NBN technology type, it is listed in your NBN ordered email.
If your NBN connection is: | Instructions: |
---|
Hybrid Fibre Coaxial (HFC)
Fibre to the Premises (FTTP
Fibre to the Curb (FTTC) | Connect the ethernet cable from the WAN port on
the NetComm NL20MESH to the UNI-D port on your nbn® connection box. Connect
the power adaptor from the power supply jack to the power outlet.
-
Power Adapter
-
Power Outlet
-
NBNCo Network Termination Device
-
Ethernet Cable
-
WAN Port
-
Power Supply Jack
-
Power Adapter
-
Power Outlet
-
NBNCo Network Connection Device
-
Ethernet Cable
-
WAN Port
-
Power Supply Jack
If your NBN connection is: | Instructions: |
---|
Fibre to the Node (FTTN )
Fibre to the Building (FTTB) or
VDSL (over a traditional telephone line)
VDSL (over a traditional telephone line)| Connect the DSL cable from the
DSL port on the NetComm NL20MESH to the wall socket. Connect the power adaptor
from the power supply jack to the power outlet.
- Power Adapter
- Power Outlet
- Wall Socket
- DSL Cable
- DSL Port
- Power Supply Jack
Step 3: Connect your devices to Wi-Fi
Type the network name and password on the Wi-Fi Security Card into your wireless device when connecting, or you can scan the QR code.
Connecting a telephone to a NetComm NL20MESH
Connect a regular telephone handset to the NetComm NL20MESH by connecting
the cable from the VoIP port to the telephone handset.
- Power Adapter
- Power Outlet
- Telephone Handset
- VoIP Cable
- VoIP Port
- Power Supply Jack
Getting online via 4G mobile network
How 4G backup works:
Automatic failover: If the modem detects a failure or significant disruption, it automatically switches to the 4G LTE connection to maintain internet access^.
Quick transition: The transition to 4G is fast, meaning there’s minimal interruption to your internet service. Automatic reversion: Once the primary broadband connection is restored, the router automatically switches back from the 4G connection to the main connection.
Benefits of 4G backup:
- Enhanced connectivity
- Additional peace of mind
- Easy setup
^4G Backup is available for use with eligible business nbn® plans when you purchase a compatible modem from More. Subject to data usage caps. If you go over your included monthly data allowance, 4G Backup will not work. 4G Backup only available in areas with Optus 4G coverage.configuring your NetComm NL20MESH
Note: If you have purchased your NetComm NL20MESH from the More website, it will come pre-configured and all you’ll need to do is follow the set-up process outlined above.
If you have factory-reset your device or purchased from an alternative retailer, please follow these easy steps to access the configuration page of your NetComm NL20MESH.
- Push the power button on the side of the NetComm NL20MESH to turn it on. Wait a few minutes for it to complete start up.
- Use a device (eg., laptop or PC) and connect to your modem. You will have to do this before you can login to the modem online.
- Open a web browser and type https://192.168.20.1/ into the address bar, then press Enter.
- At the login screen, type in the username and password printed on the label on the bottom of the NetComm NL20MESH and login.
- Select ‘Basic Setup’ from the menu on the left-hand side of the screen to begin set up.
If your NBN connection is:
Hybrid Fibre Coaxial (HFC), Fibre to the Premises (FTTP), Fibre to the Curb
(FTTC)
- Select ‘Ethernet WAN’ as your WAN connection type.
- Select ‘PPPoE’ as your WAN mode for your internet connection.
- Select ‘No VLAN Tag’ as your VLAN option for your connection.
- Enter your username and password provided to you in your NBN ordered email.
- Click the ‘Apply/Save’ button to complete the setup.
If your NBN connection is:
Fibre to the Node (FTTN), Fibre to the Building (FTTB)
- Select ‘VDSL’ as your WAN connection type.
- Select ‘PPPoE’ as your WAN mode for your internet connection.
- If appliable, select ‘Custom VLAN Tag’ as your VLAN option for your connection and enter 100. Otherwise select ‘No VLAN Tag’.
- Enter your username and password provided to you in your NBN ordered email.
- Click the ‘Apply/Save’ button to complete the setup.
configuring your telephone
To configure your telephone, you will need to contact our Voice Team for your VoIP settings. Once you have received your VoIP settings follow these easy steps listed below.
- Open a web browser and type https://192.168.20.1/ into the address bar, then press Enter.
- At the login screen, type in ‘admin’ as your username and the password printed on the label on the bottom of the NetComm NL20MESH and login.
- Select ‘Voice’ from the menu on the left-hand side of the screen and select ‘SIP Basic Setting’.
- Tick the first 3 boxes ‘Use SIP Proxy’, ‘Use SIP Outbound Proxy’, ‘Use SIP Registrar’ and enter the domain/proxy provided by our Voice team.
- In the table enter the provided username in the ‘authentication name’, ‘Cid Name’ and ‘Cid Number’ boxes.
- In the table enter the provided password in the password box.
- Click the ‘Apply/Save’ button to complete the setup.
- Select ‘VOIP Status’ from the menu on the left-hand side of the screen and check underneath ‘Registration Status’ column it says ‘Up’ to ensure connection.
need support?
For a more comprehensive user guide, you can view the NetComm User Guide
here.
Alternatively, for Customer Service and troubleshooting, contact our team on
1800 733 368
NetComm NL20MESH6 Quick Start Guide more.com.au
Documents / Resources
|
NetComm NL20MESH6 Wi-Fi 6 LTE CloudMesh
Gateway
[pdf] User Guide
NL20MESH6, NL20MESH6 Wi-Fi 6 LTE CloudMesh Gateway, Wi-Fi 6 LTE CloudMesh
Gateway, 6 LTE CloudMesh Gateway, CloudMesh Gateway, Gateway
---|---
References
- nbn® Plans, Mobile Plans, Business Phone Systems & Business Data | More ™
- Home | NetComm Wireless Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>