LINDY 43364 5m USB 3.2 Gen 2 C/C Active Extension User Manual
- June 3, 2024
- LINDY
Table of Contents
5m USB 3.2 Gen 2 C/C Active
Extension
User Manual
No. 43364
lindy.com
© LINDY Group – FIRST EDITION (June 2022)
Introduction
Thank you for purchasing the 5m USB 3.2 Gen 2 C/C Active Extension. This
product has been designed to provide trouble free, reliable operation. It
benefits from both a LINDY 2 year warranty and free lifetime technical
support. To ensure correct use, please read this manual carefully and retain
it for future reference.
The Lindy USB 3.2 Active Extension Cable uses built-in active electronics to
extend the cable length of a USB device by an additional 5m whilst continuing
to support fast and efficient data transfer rates of up to 10Gbps. With a
reversible Type C input connector and Type C female port, this extension cable
allows Type C devices such as pen drives, cameras or smartphones to be
connected at longer distances with no compromise on data transfer speeds,
ideal for when the Type C device is hard to repeatedly access or when
connecting USB devices that are required at a distance such as boardroom
webcams.
Package Contents
- 5m USB 3.2 Active Extension Cable
- This manual
Features
- USB 3.2 / 3.1 Gen 2 / USB 3.0 specification
- Supports USB 3.2 / 3.1 Gen 2 data transfer rates up to 10Gbps
- Interfaces: USB Type C male to USB Type C female
- Cable length: 5m
- Chipset: VL822
- 3.5/1.35mm DC socket for 5VDC 1A power supply (not included)
- Plug & Play Installation
- Compatible with USB Type C equipped computers
Installation
Connect the 5m USB 3.2 Active Extension Cable to a free USB Type C port on your computer. Your computer will recognize the new hardware and install any required drivers automatically. Now connect your USB device to the USB Type C socket of the 5m USB 3.2 Active Extension Cable. For USB devices with high power demands, such as a USB Hub, it may be necessary to connect a separate power supply.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic
Products Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Manufacturer (UK): LINDY Electronics Ltd Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk
, T: +44 (0)1642 754000
Tested to comply with FCC standards.
For home and office use.
No. 43364
st1 Edition, June 2022
lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>