FAGERHULT G4 70 Pleiad Recessed Mounting Narrow Beam Installation Guide
- September 14, 2024
- FAGERHULT
Table of Contents
FAGERHULT G4 70 Pleiad Recessed Mounting Narrow Beam
Specifications
Product Name: Pleiad G4 70
- Model: SE – 566 80 Habo
- Input Voltage: 220-240 V
- Power: 70 W
- Dimensions: 104mm diameter, 100mm thickness
Product Usage Instructions
Luminaire Replacement
The light source and control gear should only be replaced by the manufacturer or its designated person.
Maintenance and Troubleshooting
If the luminaire cable is damaged or if the luminaire is not functioning correctly, it should be checked/replaced by the manufacturer or their designated person.
Installation Guidelines
- Must not be covered with insulating matting
- For mounting in ventilated or unventilated spaces
Emergency Recessed Model
- Disconnect the luminaire before installation and replace the battery.
- Connect the battery before switching on the main supply.
Emergency Unit Operation
In switchDIM operation, the emergency unit will work as a SELF-TEST unit, performing all functions and duration tests automatically.
FAQ
Q: Can I replace the light source and control gear myself?
A: No, these components should only be replaced by the manufacturer or their designated personnel for safety reasons.
Q: What should I do if the luminaire cable is damaged?
A: In case of a damaged cable or malfunctioning luminaire, contact the manufacturer or their designated person for inspection and replacement.
INSTALLATION INSTRUCTION
Pleiad G4 70
- The light source and control gear shall only be replaced by the manufacturer or its designated person.
- The luminaire MUST be connected before plugging in the mains voltage!
- It is appropriate that this information is passed on to the users of the installation.
Pleiad G4 70 Remove Procedure
- If the luminaire cable is damaged or if the luminaire is not working properly, it shall exclusively be checked/replaced by the manufacturer or by the manufacturer’s designated person.
- The light source and control gear shall only be replaced by the manufacturer or its designated person.
- For mounting in ventilated or unventilated space.
Pleiad G4 70 Dim to Warm
- The light source and control gear shall only be replaced by the manufacturer or its designated person.
- The luminaire MUST be connected before plugging in the mains voltage!
- It is appropriate that this information is passed on to the users of the installation.
Pleiad G4 70 Remove Procedure
- For mounting in ventilated or unventilated space
- The light source and control gear shall only be replaced by the manufacturer or its designated person.
- If the luminaire cable is damaged or if the luminaire is not working properly, it shall exclusively be checked/replaced by the manufacturer or by the manufacturer’s designated person.
Pleiad G4 70 Recessed Emergency
- Disconnect Luminaire before installation and replace the battery
- Connect battery before switching on the main supply
- It is appropriate that this information is passed on to the users of the installation.
Removal Procedure
- The light source and control gear shall only be replaced by the manufacturer or its designated person.
- For mounting in ventilated or unventilated space
- If the luminaire cable is damaged or if the luminaire is not working properly, it shall exclusively be checked/replaced by the manufacturer or by the manufacturer’s designated person.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>