xiaomi 2312DRA50G Redmi Note 13 Pro 5G Smartphone User Guide
- September 12, 2024
- Xiaomi
Table of Contents
xiaomi 2312DRA50G Redmi Note 13 Pro 5G Smartphone
Specifications
- Model : Redmi Note 13 Pro 5G
- Connectivity : GSM / GPRS / EDGE / UMTS / LTE / 5G NR
- Wireless : Bluetooth, Wi-Fi
- Charging Port : USB Type-C
- SIM Card : Standard SIM cards only
- SAR : 0.991 W/kg
Product Usage Instructions
Powering On the Device
Long press the power button to turn on the Redmi Note 13 Pro 5G.
Initial Setup
Follow the on-screen instructions after powering on to configure the device
according to your preferences.
SIM Card Usage
Only use standard SIM cards in the designated slot to prevent damage to the
device.
Important Safety Information
- Avoid high volume levels for extended periods to prevent hearing damage.
- Do not expose the device to high temperatures to avoid overheating and potential explosion.
- Do not disassemble, hit, or crush the battery to prevent injury or damage.
Security Statement
Always update the device’s operating system using the built-in software update
feature or authorized service outlets to avoid security risks and data loss.
Thank you for choosing Redmi Note 13 Pro 5G
Long press the power button to turn on the device. Follow the on-screen
instructions to configure the device. For more information, visit our official
website:
www.mi.com/global/service/userguide
About SIM:
Please do not insert non-standard SIM cards into the SIM card slot. They may
damage the SIM card slot.
WARNING: Do not disassemble this device.
WEEE
- Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU.
- To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly.
- To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.
CAUTION
- RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
- DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification
Important Safety Information
Read all safety information below before using your device:
- Use of unauthorized cables, power adapters, or batteries can cause fire explosion, electric shock, pose other risks, or damage the device.
- This device’s operating temperature range is 0°C to 40°C. Using this device in an environment outside of this temperature range may damage the device.
- If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself.
- Charge this device only with the included or authorized cable and power adapter. Use only authorized accessories which are compatible with your device.
- After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
- The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.
- Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
- Do not short circuit the battery, as this may cause overheating, burns, or other injury.
- Do not place the battery in a high-temperature environment.
- Overheating may cause explosion.
- Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
- Do not burn the battery, as this may cause fire or explosion.
- User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
- Keep your device dry.
- Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
- Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
- For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.
Safety Precautions
-
Observe all applicable laws and rules restricting use of mobile phones in specific situations and environments.
-
Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas requiring “two-way radios” or “electronic devices” to be turned off to prevent potential hazards.
-
Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your phone may interfere with the device’s operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your mobile phone and the pacemaker. This can be done by using your phone on the ear opposite to your pacemaker and
not carrying your phone in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or other similar devices. -
Observe all aircraft safety regulations and turn off your phone on board aircraft when required.
-
When driving a vehicle, use your phone in accordance with relevant traffic laws and regulations.
-
To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
-
Do not use your phone to make calls while it is charging.
-
Do not use your phone in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage
Security Statement
Please update your phone’s operating system using the built-in software update
feature, or visit any of our authorized service outlets. Updating software
through other means may damage the device or result in data loss, security
issues, and other risks.
EU Regulations
RED Declaration of Conformity
Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE /
UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi 2312DRA50G is
in compliance with the essential requirements and other relevant provisions of
the RE Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address:
www.mi.com/en/certification
RF Exposure Information (SAR)
- This device is in compliance with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).
- During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no separation and near the body with a separation of 5 mm.
- SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. This device should be carried at least 5 mm away from the body to ensure RF exposure level is compliant or lower than the reported level.
- When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components and allows a separation of at least 5 mm to be maintained between the device and the body. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.
Certification Information (Highest SAR)
This radio communication equipment has the specific absorption rate (SAR) of
0.991 W/kg as related to the equipment, which is in compliance with the Safety
Standard for the Use of Radio communication Equipment on Human Health
announced by the National Telecommunications Commission.
Legal Information
This device may be operated in all member states of the EU. Observe national
and local regulations where the device is used. This device is restricted to
indoor use only when operating in the 5250 to 5350 MHz frequency range in :
AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU,
IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR
Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards and other features as ratified in IEEE Standard 802.11 specifications) may vary based on regional availability and local network support. The function may be added via OTA when and where applicable.
Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a
radius of 20 km from the centre of Ny-Ålesund.
Please ensure the used power adapters are compliant with applicable country
regulations and international and regional safety standards.
Frequency Bands and Power
This mobile phone offers the following frequency bands in EU areas only and
maximum radio-frequency power:
- GSM 900: 35.5 dBm
- GSM 1800: 32.5 dBm
- WCDMA band 1/8: 25.7 dBm
- LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm
- 5G NR band n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm, 5G NR band n77/n78: 29 dBm Bluetooth: 20 dBm
- Wi-Fi 2.4 GHz band: 20 dBm
- Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm,
- 5470 to 5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm
- NFC: 13.56 MHz < 42 dBuA/m at 10m
- 5G connection depends on country, carrier, and user environment
FCC Regulations
- This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy. The exposure standard for wireless
devices employs a unit of measurement known as Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this
device has been tested and meets the FCC RF exposure guidelines for use with
an accessory that contains no metal and positions the device a minimum of 1.5
cm from the body. RF exposure compliance with any body-worn accessory that
contains metal was not tested and certified, and use of such body-worn
accessory should be avoided. Any accessory used with this device for body-worn
operation must keep the device a minimum of 1.5 cm away from the body.
FCC Note
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
E-label
This device has an electronic label for certification information.
To access it, please go to Settings > About phone > Certification, or open Settings and type “Certification” into the search bar Model : 2312DRA50G 2312 indicates that this product will be launched after 202312.
NBTC
The telecommunication equipment and this device conform to the requirements of
NBTC.
Disclaimer
This user guide is published by Xiaomi or its local affiliated company.
Improvements and changes to this user guide necessitated by typographical
errors, inaccuracies of current information, or improvements to programs
and/or equipment, may be made by Xiaomi at any time and without notice. Such
changes will, however, be incorporated into new online editions of the user
guide (please see details at
www.mi.com/global/service/userguide).
All illustrations are for illustration purposes only and may not accurately
depict the actual device.
- Manufacturer : Xiaomi Communications Co., Ltd.
- Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District, Beijing, China, 100085
- Brand : Redmi Model: 2312DRA50G
© Xiaomi Inc. All rights reserved.
FAQ
Q: Can I use non-standard SIM cards with the Redmi Note 13 Pro 5G?
A: No, please only use standard SIM cards to prevent damage to the device.
Q: How do I dispose of the device safely?
A: To safely dispose of the device, use return and collection systems or
contact the retailer where it was purchased for recycling.
Q: What should I do if I need assistance with the device’s software?
A: Update the software through authorized service outlets or using the built-
in update feature to avoid potential damage or data loss.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>