VETEK OCS-V High Resolution Digital Crane Scale User Guide
- September 13, 2024
- VETEK
Table of Contents
OCS-V High Resolution Digital Crane Scale
“`html
Product Information
Specifications
- Accuracy: Chinese GB/T 11883-2002 CIII eqv. OIML R76
- Tare Range: 100% F.S.
- Zero Range: 4% F.S.
- Stable Time: 10 seconds
- Overload Safety: 100% F.S. + 9e 120% F.S.
- Load Battery: 18650 lithium battery
- Battery: DC5V charger
- Battery Life: >20 hours
- Display: 115*41mm LED display
Product Usage Instructions
Operation and Maintenance
-
Do NOT overload the scale to avoid damaging the load cell and
voiding the warranty. -
Do NOT leave the load hung on the scale for extended periods as
it can decrease accuracy and shorten the load cell’s life. -
Inspect the shackle, hook, clips, pins, and screws regularly
before using the scale. -
Check the battery frequently and replace dead batteries with
new ones promptly. -
Rotate the load instead of the scale if needed.
-
Avoid using the scale under thunder or rain conditions.
-
Hang the scale on a shelf in a dry and well-ventilated room; do
NOT place it directly on the ground. -
Do NOT attempt to repair the scale yourself; contact your local
representative for assistance. -
Use only the original DC5V charger; do NOT use external
chargers.
FAQ
Q: How do I change the Auto-Off Timing on the scale?
A: Press the corresponding keys as described in the User Setup
section to access the Auto-Off Timing setting. Then, use the
provided instructions to change the timing value to your desired
setting.
Q: What is the default Idle Mode Timing setting for the
scale?
A: The default Idle Mode Timing setting is 30 seconds. You can
adjust this setting using the instructions provided in the User
Setup section.
“`
OCS-V
User Guide
Manual_OCS-V_V1 ENG
High Resolution Digital Crane Scale
User Guide
For good performance and precise measurement, be careful with daily operation and maintenance.
Do NOT overload scale. This will damage loadcell and void
warranty.
Do NOT leave load hung on the scale for long. This will
decrease scale’s accuracy and shorten loadcell’s life.
Inspect shackle and hook before using. Check clips, pins and
screws regularly.
Check battery frequently. When scale runs out of power, replace
the dead batteries with new ones.
Rotate load rather than scale if needed. Do NOT use scale under thunder or
rain. Hang scale on shelf in dry and well-ventilated room. Do NOT
place scale on the ground directly.
Do NOT attempt to repair scale yourself. Contact your local
representative.
Do NOT use external chargers, Use the original DC5V charger.
Specifications
Accuracy Tare Range Zero Range Stable Time Overload Safety Load Battery Battery Life Display
Chinese GB/T 11883-2002 CIII eqv. OIML R76 100% F.S. 4% F.S. 10sec 100% F.S. + 9e 120% F.S. 18650 lithium battery DC5V charger >20hour 115*41mm LED display
Page 1 of 4
High Resolution Digital Crane Scale
Op. Temp.
-10 ~ +40
User Guide
Display & Keys
Scale Keys
Key Name Function Power-on
On/Off Power-off
Zero Zero
Hold Lock/unlock
Tare Tare in/out
Remote Keys
Key
Name Function
Zero
ZeroChange digit
Tare
Tare in/outMove digit
Hold Lock or unlockConfirm &Next
Page 2 of 4
High Resolution Digital Crane Scale
Acc.
2nd functionChange digit
User Guide
Del.
2nd functionMove digit
F1
2nd function
F2
Unit Switch
Off
Long press to power off
2nd
2nd function
User Setup
Press
first then press shows.
to enter User Setup menu.
Auto-Off Timing
Press to enter Auto-Off Timing.
shows.
Press
or
to change timing value.
Auto-Off Timing can be set to: (disabled), (5min),
(10min), (15min), (30min), (60min).
Display Brightness
Press Press
br to enter Backlight Brightness. — shows.
or
to change brightness value.
Display Brightness can be set to 0-7 levels.
Press Press
Idle Mode Timing
idE to enter Idle Mode Timing.
— shows
or
to change timing value.
Page 3 of 4
High Resolution Digital Crane Scale
User Guide
Idle Mode Timing can be set to: 0(disabled), 5(5sec), 10(10sec), 15(15sec), 30(30sec), 60 (60sec). It is 30sec by default.
Press to exit User Set.
Page 4 of 4