Flipkart XG-8 Bluetooth 5.0 Headset User Manual
- September 12, 2024
- Flipkart
Table of Contents
- Flipkart XG-8 Bluetooth 5.0 Headset
- Automatic matching
- Dual headphones – God operation function explanation
- You need to use a separate headset (single-ear mode) please see here
- How to charge the charging compartment
- Product parameters
- FCC Requirement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Flipkart XG-8 Bluetooth 5.0 Headset
Automatic matching
Dual headset usage mode – automatic matching
(This mode is suitable for initial use)
-
Remove the charging insulation sticker behind the dual headphones and re-insert it. Charging bin, activate both sides of the headset.
Note: If the headset is not charging after it is placed, please use USB a charging cable, charging the charging post at the same time -
Take out two headphones (R and L left and right), and automatically turn on the blue flashing tone “on” which will complete the pairing after 7-10 seconds. The prompt tone “pairing is completed”, then the main ear enters the red and blue pairs to flash into pairing mode, open the phone Bluetooth function interface search, find the pairing Name: XG-5.0, then double click to pair, the tone “pairingComplete” then complete the pairing into the use state.
-
Whether the binaural mode connection is successful is not particularly simple. After each charging compartment is taken out, it can be connected back in seconds. Your mobile device does not need to repeat the operation.
Dual headset usage mode manual matching
(used when automatic matching fails)
- Double-headphones press and hold the power button for 3 seconds respectively (at this time, the two headphones’ blue light flashes slowly, and the prompt tone is: boot), and then enter the pairing mode, the pairing will be completed after 7-10 seconds, the prompt tone is completed. Then, the main ear enters the red and blue pair to enter the pairing mode, opens the mobile phone Bluetooth function interface search, finds the pairing name: XG-5.0, and then clicks the pairing, the prompt tone “Pairing is completed to complete the pairing into the use state.”
- If there is a headset that has been connected to the Bluetooth device of this mobile phone, it will connect to your Bluetooth device in seconds after booting up, no need to repeat the operation.
Dual headphones – God operation function explanation
Shut down
Long press any side of the headset (R or L) for about 4 seconds to turn off
the playback pause
Play status click any one
Side headphones (R or L) for playback pause
Turn on/off the phone
You can connect or hang up the phone by pressing the main headset (L headset)
during a call.
Refuse to answer the call
long press 1S to reject the headset (L headset) when you call.
- Click the left side earphone 3 times means decreases the volume.
- Click the right side earphone 3 times means increases the volume.
Previous song
In the playback state, the left ear can be double-clicked to switch to the
previous song, and the right ear can be double-clicked to switch to the next
song.
Volume increase and decrease
In the using state, clicking the left side earphone 3 times can decrease the
volume., click the right side earphone 3 times can increase the volume.
Call smart voice assistant (such as Siri)
When using or on standby, press and hold the main headset (L headset) for
about 1 second to wake up.
Turn off smart voice assistants (like Siri)
When using Siri, press and hold the main headphones (L headphones) for about 1
second to turn off.
Note: In dual headset mode, answer the call/call/voice mode /There is only the main earphone (L earphone), there is sound to support the radio, the auxiliary earphone(R headphones) is temporarily closed, silent state, to end the voice state, automatic recovery of binaural normal mode
You need to use a separate headset (single-ear mode) please see here.
- Use the main headset (L headset) separately from the charging compartment to charge After exiting, it will automatically enter the search pairing status, you can directly Search XG-5.0 on the Bluetooth function interface of the mobile phone, and click to connect to the device. Ready and go into use. At this time, please put the sub headphones (R headphones) in. Return to the charging and shutdown state inside the charging compartment.
- Separately use the sub-headphone (L-headphone) to take the charging status from the charging compartment. After exiting, please turn on the button for 3 seconds to enter the search pair State, you can search directly on the phone Bluetooth function interface XG-5.0, and click to connect the device and enter to use
You need to use a separate headset (single-ear mode) please see here
How to charge the headphones?
-
The earphone is placed in the charging compartment, and the charging contact enters the charging state after being in contact with the suction. When the headset is full, the indicators on the headset and the charging compartment will go out.
2 charging compartments to the headset charging indicator flashing law- charging compartment 0-25%, the power status blue light flashes 1
- charging compartment 25-50%, the power status blue light flashes 2 times
- charging cabin 50-75%, power status blue light flashes 3 times
- charging compartment 75-99%, power status blue light flashes 4 times
How to charge the charging compartment
Please use the 5V charger to charge the charging case. When fully charged, the LED display will show the number 99.
- Please use the power cord supplied to charge the charging case.
- During the charging, the LED display will show the level of power, such as 88 means the power is 88%. When charging is completed, the indicator light will be off.
Please pay attention to the signal precautions when using the headset:
- The wearing method is very important to avoid the signal antenna being blocked by the inside of the ear Block, please wear according to the introduction page wearing method;
- In the binaural mode, any one-side earphones will cause a signal by hand. Bad situation, this type of technology headset has this situation, because the equivalent of blocking the signal connection between the two headphones by hand; 3 in the binaural mode, the headset must not be in the middle of the main headset (L headset). There are too many disturbing obstacles and need to ensure both distance between the mobile phone and the main headset (L headset) Signal transmission.
- In binaural mode, if the secondary earphone (R earphone) has an occasional disconnection problem, It is a normal phenomenon, after all, Bluetooth is a wireless signal transmission,Like the WiFi network, sometimes instability is normal.At this point, just the signal transmission is disturbed, please wait a moment or change Just solve the position.
Product parameters
- Model : XG-12
- Communication distance: about 10 meters with
- charging box weight : 70g
- Talk time : 3.5h charging voltage: DC 5v
- Charging times : 3.5 times
- Support Agreement : HFP/HSP/A2DP/AVRCP
- Bluetooth version : 5.0
- Headphone standby time : 120h headphone
- charging time : 0.8h music time: 4h
- Charging box battery capacity : 350Mah
After-sales service and support
warranty period
The warranty period for this product is 12 months from the date of receipt.
Free service
During the product warranty period, all the faults caused by the quality of
the product itself, Please contact the dealer with this warranty card and
purchase voucher. To enjoy free repairs.
Bluetooth headset three-package certificate
Service Commitment: ‘Strictly based on consumer rights of the People’s
Republic of China The Law of Protection and the Law of the People’s Republic
of China on Product QualityAfter-sales three-pack service, the service content
is as follows: During the validity period of the three packs, you can enjoy
repair/replacement according to this regulation. The right to return/repair,
repair/replacement/return should be handled by invoice.
- From the date of your receipt on the 7th, the product appears ‘in the performance failure table”The listed performance faults are detected by the after-sales service center. Confirm, according to your choice, free return and replacement.
- From the 15th day of your receipt date, the product appears as ‘Performance Failure The listed performance faults are detected by the after-sales service center. Make sure that you can return or repair the service free of charge based on your choice.
- Within 12 months from the date of your receipt, the product appears in the ‘Performance Fault Table’ The listed performance faults are detected by the after-sales service center. Make sure that repairs are made free of charge based on your choice.
Bluetooth Headset Performance Fault Table
prompt
- Please read the instruction manual carefully before using the product and keep it in a safe place.
- For the first time, please fully charge this product.
- If the product is not used for more than three months, please charge it.
- Must choose the charger produced by the regular manufacturer and pass the national CCC certification.
- If the phone cannot search for Bluetooth, please confirm if the Bluetooth headset iin s “Pairing mode” Bluetooth headset if not paired or connected for a long pairing function will be turned off, please reboot the Bluetooth headset from”pairing “Mode” If the phone program error occurs, please restart the phone, if the Bluetooth headset The program is wrong, please restart the Bluetooth headset.
- When the main and sub-headphones are turned on, they cannot be automatically connected. You can pressand hold the multi-function button of the main and sub-headphones in the off state. Press the button until the white light is on, and wait for the connection to resume the connection.
caveat
- Do not remove or repair the modified headphones for any reason, otherwise it mayThis can cause an electrical breakdown of the fire and even completely damage the product.
- Do not place the device at a temperature that is too low or too high (below 0°C or an environment above 45 ° C).
- Please avoid using the device indicator near the eyes of children or animals.
- Do not use the device during thunderstorms. Thunderstorms may cause equipment not to work properly and increase the risk of contact.
- Do not wipe the product with oil or other volatile liquids.
- Do not let the device get wet with liquids.
Note
Long-term use of headphones may cause hearing damage, please arrange the use
time reasonably.
FCC Requirement
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference thatmay cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.