Flipkart RZ-10V6 Automatic Stirring Thermostatic Cup Instruction Manual

INSTRUCTION FOR AUTOMATIC
STIRRING THERMOSTATIC CUP
INSTRUCTION MANUAL
12V/2A
RZ-10V6

Please read this instruction manual carefully before using the product.
And keep it safe
The Company reserves the right to interpret the specification.
The appearance of the product is subject to the actual product.

PRECAUTIONS

• Allthe contents of this project are related to safety, please be sure to comply with it.
• The precautions in this item are mainly for the correct use of this product. The precautions explain the danger, degree of harm, and possible accidents.
• The description is divided into two levels: [Warning] and [Caution].

1. Before using the product, please read this manual carefully and keep it for future reference.
2.  Do not use other accessories that are not approved by the manufacturer. If the machine malfunctions due to this, the warranty will be terminated by it self.
3. Please check whether the product is damaged after unpacking, and check whether the accessories are complete.
4. Children and incapacitated persons should use this product under the supervision of their guardians.
5. In the event of a malfunction, unplug the power cord immediately, and never put the defective product in working condition.
6. WARNING:
   No swallowing the stirring beats used for stirring into a capsule shape in the cup

Warning: Failure to follow the instruction manual may be dangerous.
Note: Operation in violation of regulations may damage your property, and even endanger your personal safety.

Warning
Do not make any modification, and non-professional maintenance personnel are forbidden to disassemble and repair, otherwise it is prone to fire, electric shock and injury accidents.
For repairs, pleasego to the after-sales department of our company or contact the designated “fixed-pointmaintenance office’.

Please keep this product out of the reach of children or incapacitated persons. Children and incapacitated persons should use this product under the supervision of their guardians.

Do not immerse the portable blender water or other liquids, and do not touch the machine with wet hands, otherwise, electric leakage accidents may easily occur.|
---|---
Do not place this product ona hot surface.|
Keep the power cord away from heat sources.|

This product can only be repaired in the repair center authorized by the company. When repaired in an unauthorized repair center, other unsafe factors may be easily caused.

Product component name

The product, accessories, user interface, and other illustrations in the manual are schematic drawingsReference. Due to product updates and upgrades, the product’s physical and schematic may be slightly Please refer to the actual object for the difference

Instructions for quick use

● First use

1. Place the portable blender on a dry, stable, and easy-to-clean surface.
2. Before using this product for the first time, be sure to remove all attachments (such as tag, etc.) on the fuselage to avoid danger.
3. Please clean the inner container of the portable blender thoroughly before formal use to ensure cleanliness.

● How to use the stir mug
For the product, it’s recommended to use the adapter with an output current of 12V 2A, when using adapters below the output current 2A, the use effect will decrease somewhat the stirring effect and thermal insulation effect are reduced. If the two function keys are started at the same time, the light brightness will be reduced. When the cup body and the base are not properly aligned, the output current of the adapter used is lower than 1A and the stir mug will not be normal

1. After the power is connected, the two guiding lights of the base will flash, the buzzer will sound, and then the light will go into the standby state
2. Place the cup body on the base and the guiding lights of the body light will flash twice

Operating function description:
Cup body guiding light turns off for insulation: after touching the “insulation” button, the first touch is the default 55 degrees, after touching again, it’s to select the next temperature, the base insulation lamp will light for a long time when the cup body guiding light is on and the selection temperature is above or below the selection temperature, press the insulation state for 2 seconds, close the insulation function, and the insulation lamp is off, and the cup body guiding light is off.
Note: The “Stir” and “keep warm’ functions can be used separately.

Cleanliness and Environmental Protection

● Cleaning and descaling

1. Before cleaning the product, be sure to unplug the power plug first.
   a. Do not use steel wool, abrasive cleaners or corrosive liquids (such as gasoline or acetone) to clean the product.
   b. Never immerse the portable blender in water or any other liquid.

2. Clean the portable blender
   Wipe the outer surface of the portable blender with a soft cloth dipped in warm water and a harmless detergent.

● Storage

1. Place the portable blender ona level, dry and stable surface.
2. The portable blender cannot be placed and stored close to other heat sources.
3. Do not place any sundries on the portable blender.

● Environmental protection
When disposing of the product, please do not stack it with general household waste; it should be handed over to the officially designated recycling center.

Basic parameters

GB4706.30-2008

Exception handling

correctly
Function light is on, but no heating| The power cord is damaged| Replace the power cord
Power indicator flashes| Control panel failure| Replace or send for inspection and maintenance
Stirring speed is slow| Adapter output voltage is lower than 2A| Replace the adapter with output voltage ≥ 2A

Note: The types of failures and common problems include but are not limited to the above. If the problem still exists or other problems occur, please contact the after-sales service center for help.

Food Testing Information Form

Please use this product normally according to the instructions.
This product meets the requirements of the corresponding national food safety standards. The compliance information of food contact materials
and their implementation standards is explained as follows:

Part Name| Material| Compliance standard
Inner lid cover| PC| GB4806.7-2016
Stir bar| PTFE
Inner container| 06Cr19Ni10| GB4806.9-2016
Note: This series of products contains the above food contact materials.
Some models may not contain individual materials. Please refer to the actual product.

Environmental checklist

Restricted use mark of hazard ous substances
This form is prepared in accordance with SJ/T 11364 regulation.
O: Indicates that the content of the hazardous substance in allhomogeneous materials of the part is below the limit requirements specified in GB/T 26572 regulation.
×: Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceedsthe limit requirements specified in GB/T 26572 regulation.

The above marks are in accordance with China’s Administrative Measures on Restricted Use of Hazardous Substances and its supporting standard SJ/T 11364.
Long-term use of this product will not cause harm to human health, please rest assured to use.

After-sales service

Thank you for choosing our products. For your due rights and interests, please keep the after-sales service card properlyStop losing.
If you have any questions during use, please contact our customer service or call our service hotline at 0757-85723050

Date of Purchase:
Address:

I. In the warranty period, under normal use, free warranty for one year (from the purchase date, the sales voucher shall prevail).
II. In the warranty period, in one of the following circumstances, will be charged as appropriate cost or service fees, please understand!

1. Damages caused by improper use, maintenance or storage by consumers;
2. The damage is caused by the disassembling of repairmen which are not from the ‘Three guarantees ;
3. No ‘Three guarantees vouchers;
4. The certificate model of the ‘Three guarantees is inconsistent with the model of the repaired product or is altered;
5. The appearance is naturally polluted due to use;
6. Damaged for commercial use;
7. Damages caused by force majeure are not included in the warranty.

III. This product is only for sale and use in America.
IV. This card cannot be reissued, please keep it properly.
V. For the products that do not belong to the scope of maintenance and exceed the warranty period, we will still serve you warmly and only charge the cost of parts and materials.

Foshan Cangguo Technology Co., LTD
Address: No. 32, Yanbu Liangui Road,
Dali Town, Nanhai District,
Foshan City
Tel: 0757-85723050

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>