coolme Stage GoFree Portable Wireless Speakers User Guide
- September 12, 2024
- coolme
Table of Contents
coolme Stage GoFree Portable Wireless Speakers
INTRODUCTION
Congratulations on your purchase! This manual includes Information about the Stage GoFree speaker. We encourage you to take a few minutes to read this manual, which describes the product and includes step-by-step instructions to help you to set up and get started. Read and understand all the instructions Before using your product.
If you have any questions about this product, it’s installation or operation, please contact service@coolmetech.com, or visit us at www.coolmetech.com.
WHAT’S IN THE BOX
AT A GLANCE
- Strap
- Volume Down Button
- Power Button
- Bluetooth Button
- Playback Source Switching
- Volume Up Button
- 3.5mm Aux Input
- USB Input
- USB-C Charging Port
- Lighting Mode Control
- Microphone (Built-in)
- formal/ Bass/ Treble Mode
CHARGING YOUR SPEAKER
Use the included USB-C cable to charge your GaFree and make sure it is fully charged before first use.
POWERING ON / OFF
Press and hold for 1.5s to turn the power on or off
USING YOUR SPEAKER
Bluetooth Mode
- Power on the speaker to enter Bluetooth paring mode.
- Choose ‘Stage GoFree’ on your Bluetooth device to connect.
- When turned on, Stage GoFree will automatically connect to the last connected device if available. If not, Stage GoFree will enter pairing mode
- Short Press ( ) three times to un-pair connected device and re-enter pairing mode.
- Having connection problems? Remove Stage GoFree from your device’s Bluetooth history, ensure it’s less than 3 feet away then try pairing again.
AUX Mode
When using AUX mode, control audio playback via the connected device.
USB Mode
TWS (True Wireless Stereo) Mode
Two identical GoFree speakers can pair with each other for stereo sound.
Both speakers can play the same audio (one as the left channel and the other
as the right channel).
How it works:
- Power on and connect a GoFree speaker to Bluetooth.
- Power on the second GoFree speaker.
- Press and hold the ( ) button for 2 seconds.
- When you hear ‘TWS Paired’ prompt, it means the connection is successful.
Long press the ( ) button for 2 seconds to disconnect the TWS connection when it is already paired.
USING YOUR GOFREE
- Only one sound source can be played at a time. The priority order Is USB -> Bluetooth -> AUX.
- Starting a source with higher priority will always interrupt a Source with lower priority. To start a source with lower priority, stop the source with higher priority first.
CONTROLS
- In Aux or USB playback mode, short press ( ) button swiftly activates Bluetooth pairing mode.
- Short press ( ) button 3 times can rapidly disconnect the connected Bluetooth device and re-enter pairing mode.
CHARGE YOUR MOBILE DEVICE
When using the charging feature. ensure the speaker is powered on.
ATTENTION
- Use original or certified cables.
- Don’t disassemble.
- Avoid dropping.
- Avoid extreme temperatures.
SPECIFICATIONS
CUSTOMER SERVICE
18-month Limited Warranty
Lifetime technical support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>