better bathrooms BeBa 25399 Freestanding Double Ended Slipper Bath User Manual
- October 30, 2023
- Better Bathrooms
Table of Contents
better bathrooms BeBa 25399 Freestanding Double Ended Slipper Bath
- Two-person assembly
- Tools required
- We always recommend using professional tradespeople to install your product
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We’re on a mission to bring you extraordinary bathroom products, for less.
From modern to traditional style ceramics, plus the gorgeous fixtures,
fittings and furniture to match. So, you can fall in love with your space
every single day.
As one of the UK’s largest independent bathroom stores, we’ve received
countless awards; including the National Business Awards UK, the Digital
Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However,
should any problems occur, please:
- log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
- contact us via betterbathrooms.com/content/contact-us
Important information
- Please read these instructions thoroughly and retain for future reference
- Always check for pipes and cables before drilling
- Freestanding bath is not designed to take weight on the rim, Do not sit or stand on the bath rim.
Receive Your Bath
Unpack and check for damage.
After receiving your bath, please unpack and remove all covering, checking
whether there is any damage. Repack the bath if it is not being immediately
installed. It will be rejected any claim for damage if not notified in a
timely manner.
Protect your bath.
Before commencing and installation, ensure the bath is completely protected,
leave covering in place until the bathroom is complete. Scratches and damage
incurred during installation are not covered by the warranty.
Tools required
Installation
Step 1
Adjust the bath feet until the bath base is 3mm above the floor;
This can be done by turning the feet bars accordingly;
Then use wrench to tighten the nuts on the bars. See figure 1
Step 2
Mark the floor with the outline of the bath, at the final installation
position with the marking pencil.
Step 3
Carefully tilt the bath on its side and use flexible connector to connect the
waste outlet to the trap as illustated on figure2.
Step 4
Position the bath on the floor marking as marked on step 2, make sure that
flexible connector is not kinked upward on installation as this will result in
drainage issue.
Step 5
Apply silicone around the base surrounding of the bath, see figure 3.
Do not use the bath within 24 hours to let the silicone fully cure
Troubleshooting
Marks found on the surface could be wiped off with wet cloth and
toothpaste.
Maintenance & Cleaning
- To preserve the polished surface, after using your bath, clean with soft cloth and warm soapy water to wash away any body oils or soap residue that forms a ring tide mark.
- Do not use powders, pastes, crème cleaners, thinners, window cleaning sprays or dry cleaning liquid, etc.
- When coloured essentials oils are used, first test that the colour won’t stain your bath. Always add oils into a bath full of water. Never pour them into an empty bath.
Water testing
Water test your bath prior to enclosing to ensure it drains correctly as no
claims for non-draining baths will be valid after enclosing or tiling has been
done;
Water test overflow pipe and waste to ensure they are not leaking.
Warning (apply to bath prefitted with waste)
- The pre-fitted waste has NOT yet been fully installed.
- Please use a qualified installer to secure it to the bath to avoid any water leaking.
- Before use please test the bath to ensure the waste has been properly installed.
For more information
- visit betterbathrooms.com
- email customerservices@buyitdirect.co.uk
- call 0330 390 3062
- write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>